High-Pressure Die Cast Setup Specialist – Aluminum Tooling (2nd Shift)

Impact Solutions LLC

Cedarburg (WI)

On-site

USD 59,000 - 85,000

Full time

18 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

401(k) matching
Performance bonus
Full benefits
Attendance bonus
PTO hours

Job summary

Mindscope seeks an experienced High-Pressure Die Cast Setup Specialist for the 2nd shift in Cedarburg, WI. You will lead complete die changes, set process parameters, and troubleshoot complex systems on aluminum die casting equipment.

Role emphasizes 2+ years of hands-on setup experience, strong mechanical skills, and safe operation of cranes and forklifts. Excellent benefits and stability in a premier manufacturing environment.

Qualifications

  • 2+ years of continuous tenure at prior employers.
  • Hands-on die cast setup or heavy industrial changeover experience.
  • U.S. Citizenship or Green Card; 45-minute commute to Cedarburg, WI.

Responsibilities

  • Perform complete die changes and tooling setups for high-pressure cold-chamber aluminum die casting machines.
  • Establish and fine-tune machine process parameters including melt temperatures and pressures.
  • Safely rig, align, and install dies and tooling with cranes and forklifts.
  • Diagnose startup defects and optimize cycle times to reduce scrap.
  • Inspect hydraulic, pneumatic, water/ cooling, and spray/ladle systems before production sign-off.
  • Coordinate with Quality/Production to run first parts and secure inspections.
  • Enforce LOTO, crane safety, and molten metal handling standards.

Skills

Die casting setup experience
Mechanical troubleshooting
Overhead crane operation
Forklift operation
Safety compliance

Education

High School Diploma or GED

Tools

ABB robotics
Fanuc robotics

Job description

Job Order ID: 4832

Employment Type: Permanent

Salary: $59280-85280/Yr

Web Publication Date: 11/17/2026 12:00:00 AM

Job Location: Cedarburg, WI 53012

Job Function:

High-Pressure Die Cast Setup Specialist – Aluminum Tooling (2nd Shift)

Up to $41.00/hr ($85,280/yr) + Performance & Attendance Bonuses Ozaukee County / Cedarburg, WI Area Dedicated 2nd Shift Direct-Hire

  • Earn up to $41.00/hr ($85,280/yr based upon experience), paired with 401(k) matching, pay-for-performance bonus opportunities, full benefits, and additional bonus PTO hours earned through strong attendance.
  • Work a predictable 2nd shift schedule providing evening routine consistency and reliable full-time hours.
  • Join a premier, independent North American die casting leader featuring exceptional employee retention (40% of the workforce holds 10+ years of tenure) and long-standing partnerships with major tier-one industrial OEMs.
  • Lead complete die changes, establish machine process parameters, and troubleshoot hydraulic, pneumatic, and automated cell systems on high-pressure cold-chamber aluminum die casting equipment.
  • Requires verified job stability (minimum 2+ years of tenure per employer), hands-on die cast setup or heavy industrial changeover experience, U.S. Citizenship or Green Card status, and a daily commute within 45 minutes of the Cedarburg, WI area.

A premier North American leader in high-precision aluminum die casting is adding an experienced Die Cast Setup Technician to its 2nd shift operations team. Operating within a modern, well-equipped ISO-certified manufacturing facility, this seat is essential for executing timely die changes, dialing in precise process parameters, and maximizing uptime across high-pressure cold-chamber die casting cells.

With 40% of the plant workforce boasting over a decade of continuous service, this direct-hire role offers genuine long-term career stability, top-tier hourly compensation, strong 401(k) matching, and clear internal advancement paths. You will take direct ownership of tooling changeovers, robotic cell setups, and startup process optimization alongside a collaborative, safety-focused production team.

What You Will Be Doing
  • Perform complete die changes and tooling setups for high-pressure cold-chamber aluminum die casting machines and auxiliary automation equipment.
  • Establish and fine-tune critical machine process parameters, including melt temperatures, hydraulic pressures, shot speeds, intensification rates, and cycle timing.
  • Safely rig, align, and install dies, trim tools, shot-end components, plunger systems, and cooling/lubrication lines using overhead bridge cranes and forklifts.
  • Diagnose and resolve setup, mechanical, or casting defects during startup and production runs to optimize cycle times and eliminate scrap.
  • Inspect hydraulic, pneumatic, water/cooling, and automated spray/ladle systems prior to production sign-off.
  • Coordinate with Quality and Production teams to run initial parts and secure first-piece inspection approvals against established setup sheets.
  • Enforce rigorous Lockout/Tagout (LOTO), crane rigging safety protocols, and molten metal handling standards across all setups and teardowns.
What We Are Looking For
  • Demonstrated career stability with a minimum of 2+ years of continuous tenure at each previous employer.
  • Minimum of 2+ years of proven, hands-on setup or tooling changeover experience in high-pressure aluminum die casting, plastic injection molding, metal stamping, or heavy industrial manufacturing.
  • Strong mechanical troubleshooting capabilities across hydraulic systems, pneumatic controls, and complex process setup sheets.
  • Verified ability to safely operate overhead bridge cranes, forklifts, and heavy rigging equipment.
  • High School Diploma or GED required, with technical or vocational manufacturing coursework strongly preferred.
  • U.S. Citizenship or Green Card holder status residing within a 45-minute maximum daily commute of the Cedarburg / Ozaukee County, WI area.
Preferred Technical Assets
  • Specialized hands-on experience setting up cold-chamber aluminum die casting machines and integrated robotic cells (ABB, Fanuc).
  • Advanced troubleshooting knowledge for identifying and eliminating porosity, cold shuts, soldering, and flash defects.
  • Practical experience applying 5S, SMED (Single-Minute Exchange of Die), or lean continuous improvement methods to shorten changeover times.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Die Cast Setup Technician – High-Pressure Aluminum (2nd Shift)
Die Cast Setup Technician – High-Pressure Aluminum (2nd Shift)

Mindscope • Cedarburg (WI)

On-site
USD 59,000 - 85,000
401(k) with match
Full benefits
Bonus PTO opportunities
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)

H.T. Prof Executive Search • Cedarburg (WI)

On-site
USD 47,000 - 66,000
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)

Calqulate Metrics Ltd • Cedarburg (WI)

On-site
USD 47,000 - 66,000
401(k) Match
Bonuses
Health/dental/vision benefits
+1
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)

SPG • Cedarburg (WI)

On-site
USD 34,000 - 56,000
401(k) Match
Bonuses
Health/Dental/Vision benefits
+1
3rd Shift Senior Process Control Technician – Cold-Chamber Die Casting
3rd Shift Senior Process Control Technician – Cold-Chamber Die Casting

SPG • Cedarburg (WI)

On-site
USD 47,000 - 66,000
401(k) match
Health/dental/vision benefits
Attendance PTO bonus hours
Overnight Lead Die Casting Technician
Overnight Lead Die Casting Technician

Sterling St James LLC • Cedarburg (WI)

On-site
USD 47,000 - 66,000
3rd Shift Senior Process Control Technician – Cold-Chamber Die Casting
3rd Shift Senior Process Control Technician – Cold-Chamber Die Casting

Calqulate Metrics Ltd • Cedarburg (WI)

On-site
USD 47,000 - 66,000
401(k) Match
Health/Dental/Vision benefits
Attendance PTO bonus hours
2nd Shift QC Technician – CMM Metrology & IATF 16949 Foundry
2nd Shift QC Technician – CMM Metrology & IATF 16949 Foundry

Impact Solutions • Cedarburg (WI)

On-site
USD 47,000 - 66,000
Industrial Melt & Furnace Operator – Aluminum Die Casting (3rd Shift)
Industrial Melt & Furnace Operator – Aluminum Die Casting (3rd Shift)

H.T. Prof Executive Search • Cedarburg (WI)

On-site
USD 35,000 - 50,000
401(k) with company match
Health/dental benefits
Bonus PTO for attendance
Quality Control Technician – High-Pressure Die Casting & GD&T (2nd Shift)
Quality Control Technician – High-Pressure Die Casting & GD&T (2nd Shift)

Calqulate Metrics Ltd • Cedarburg (WI)

On-site
USD 47,000 - 66,000
401(k) match
Attendance PTO bonus hours
Bonuses and full benefits
+1