Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)

Software Placement Group

Cedarburg (WI)

On-site

USD 34,000 - 56,000

Full time

14 days+

Get a reply from this recruiter

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

401(k) Match
Bonuses
Health/Dental/Vision benefits
Attendance PTO bonus hours

Job summary

Software Placement Group is recruiting a Die Cast Changeover Specialist for the 2nd shift in Cedarburg, WI. This role involves leading die changes, setting machine parameters, and ensuring safe, efficient operation on high-pressure aluminum die casting cells.

Ideal candidates have at least 2 years at previous employers, hands-on setup experience, and strong mechanical troubleshooting. The position offers competitive hourly pay, benefits, and a clear growth path in a premier manufacturing

Qualifications

  • Career stability with at least 2 years at each prior employer.
  • Hands-on die casting setup or changeover experience.
  • Strong mechanical, hydraulic and pneumatic troubleshooting skills.
  • Ability to safely operate cranes, forklifts, and rigging equipment.
  • Must reside within 45 minutes of Cedarburg, WI.
  • HS diploma or GED; technical training preferred; US work authorization.

Responsibilities

  • Perform complete die changes and tooling setups.
  • Set and fine-tune parameters: melt temps, pressures, speeds.
  • Install dies, trim tools, shot-end components, and cooling lines.
  • Troubleshoot setup, machine, or casting defects to reduce scrap.
  • Verify hydraulic, pneumatic, water cooling, and spray systems.
  • Coordinate first-piece inspections with Quality and Production.
  • Follow Lockout/Tagout and crane safety procedures.

Skills

Die casting setup
Hydraulics
Pneumatics
Troubleshooting
Crane operation
Forklift operation
Quality inspection
Safety compliance

Education

High School Diploma or GED
Technical/vocational training

Tools

ABB robots
FANUC controls
Die casting equipment

Job description

Die Cast Changeover Specialist – High-Pressure Aluminum & Hydraulics (2nd Shift)

Up to $41.00/hr ($85,280/yr) + 401(k) Match & Bonuses Cedarburg, WI Area 2nd Shift Direct-Hire

  • Pay & Incentives: Baseline starting pay up to $41.00/hr ($85,280/yr baseline scaling directly with experience) + pay-for-performance bonus opportunities, 401(k) with company match, full health/dental/vision benefits, and attendance PTO bonus hours.
  • Work Pattern/Schedule: Dedicated 2nd Shift schedule providing consistent evening routine stability in a high-volume production environment.
  • Environment & Company Profile: Direct-hire seat with one of North America’s largest independent die casting manufacturers; ISO-certified facility featuring exceptional employee stability (40% of staff over 10+ years tenure) and premier tier-one OEM partnerships.
  • Core Functional Scope: Lead complete die changes, set machine process parameters (shot speeds, melt temps, intensification rates), rig tooling, and troubleshoot hydraulic, pneumatic, and automation systems on high-pressure cold-chamber aluminum die casting equipment.
  • Strict Requirements & Authorization: Requires strict career stability (minimum 2+ years per employer), hands-on die cast setup or heavy machinery changeover experience, mechanical troubleshooting depth, US work authorization, and a commute within 45 minutes of Cedarburg, WI.

A premier, North American market leader in high-precision die casting is seeking a skilled Die Cast Setup Technician to join their 2nd shift team. Operating in a fast-paced, high-volume production environment, this seat is critical for performing timely die changes, setting precise process parameters, and optimizing machine performance across high-pressure aluminum die casting cells.

Joining an ISO-certified facility where 40% of the workforce boasts over a decade of tenure, this direct-hire position offers long-term stability, competitive top-tier hourly pay, strong 401(k) matching, and clear career growth paths in an employee-centric workplace.

What You Will Be Doing (Daily Responsibilities)
  • Execute Die Changes & Setups: Perform complete die changes and tooling setups for high-pressure aluminum die casting machines and auxiliary automation equipment.
  • Set Process Parameters: Establish and fine-tune critical machine parameters including melt temperatures, hydraulic pressures, shot speeds, intensification rates, and cycle timing.
  • Install Tooling & Auxiliaries: Safely rig, align, and install dies, trim tools, shot-end components, plunger systems, and cooling/lubrication lines using overhead cranes and forklifts.
  • Troubleshoot Process & Quality: Diagnose and resolve setup, machine, or casting defects during startup and production runs to optimize cycle times and eliminate scrap.
  • Verify System Functionality: Inspect hydraulic, pneumatic, water/cooling, and automated spray/ladle systems prior to production sign-off.
  • Conduct First-Piece Inspections: Coordinate with Quality and Production to complete initial part runs and first-piece inspection approvals according to setup sheets.
  • Enforce Safety Standards: Rigorously follow Lockout/Tagout (LOTO), crane safety protocols, and safe molten metal handling procedures during all setups and teardowns.
What We Are Looking For (Requirements & Qualifications)
  • Job Stability Required: Demonstrated career stability with a strict requirement of at least 2+ years of tenure at each previous employer.
  • Setup & Tooling Experience: Proven hands‑on setup or changeover experience in high-pressure aluminum die casting, plastic injection molding, stamping, or heavy industrial manufacturing.
  • Technical & Mechanical Aptitude: Strong troubleshooting capabilities in mechanical systems, hydraulics, pneumatics, and reading complex process setup sheets.
  • Equipment Operations: Demonstrated ability to safely operate overhead bridge cranes, forklifts, and heavy rigging equipment.
  • Commutable Radius: Must reside within a 45-minute maximum commute of the Cedarburg / Greater Milwaukee, WI area.
  • Education & Authorization: High School Diploma or GED required; technical/vocational training preferred. Must be fully authorized to work in the United States without sponsorship.
Preferred Technical Assets (Bonus Skills)
  • Cold-Chamber Aluminum Expertise: Specialized hands‑on experience setting up cold-chamber die casting machines and automated robotic cells (ABB, FANUC).
  • Defect Troubleshooting: Advanced knowledge of identifying and resolving porosity, cold shuts, soldering, and flash defects.
  • Lean & Continuous Improvement: Practical experience utilizing 5S, SMED (Single-Minute Exchange of Die), or continuous improvement tools to reduce setup changeover times.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)

Calqulate Metrics Ltd • Cedarburg (WI)

On-site
USD 47,000 - 66,000
401(k) Match
Bonuses
Health/dental/vision benefits
+1
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)

H.T. Prof Executive Search • Cedarburg (WI)

On-site
USD 47,000 - 66,000
Die Cast Setup Technician – High-Pressure Aluminum (2nd Shift)
Die Cast Setup Technician – High-Pressure Aluminum (2nd Shift)

Mindscope • Cedarburg (WI)

On-site
USD 59,000 - 85,000
401(k) with match
Full benefits
Bonus PTO opportunities
3rd Shift Senior Process Control Technician – Cold-Chamber Die Casting
3rd Shift Senior Process Control Technician – Cold-Chamber Die Casting

Calqulate Metrics Ltd • Cedarburg (WI)

On-site
USD 47,000 - 66,000
401(k) Match
Health/Dental/Vision benefits
Attendance PTO bonus hours
Quality Control Technician – High-Pressure Die Casting & GD&T (2nd Shift)
Quality Control Technician – High-Pressure Die Casting & GD&T (2nd Shift)

Software Placement Group • Cedarburg (WI)

On-site
USD 47,000 - 66,000
3rd Shift Senior Process Control Technician – Cold-Chamber Die Casting
3rd Shift Senior Process Control Technician – Cold-Chamber Die Casting

Software Placement Group • Cedarburg (WI)

On-site
USD 47,000 - 66,000
401(k) match
Health/dental/vision benefits
Attendance PTO bonus hours
Quality Control Technician – High-Pressure Die Casting & GD&T (2nd Shift)
Quality Control Technician – High-Pressure Die Casting & GD&T (2nd Shift)

Calqulate Metrics Ltd • Cedarburg (WI)

On-site
USD 47,000 - 66,000
401(k) match
Attendance PTO bonus hours
Bonuses and full benefits
+1
Overnight Lead Die Casting Technician
Overnight Lead Die Casting Technician

Sterling St James LLC • Cedarburg (WI)

On-site
USD 47,000 - 66,000
2nd Shift QC Technician – CMM Metrology & IATF 16949 Foundry
2nd Shift QC Technician – CMM Metrology & IATF 16949 Foundry

Impact Solutions • Cedarburg (WI)

On-site
USD 47,000 - 66,000
Industrial Melt & Furnace Operator – Aluminum Die Casting (3rd Shift)
Industrial Melt & Furnace Operator – Aluminum Die Casting (3rd Shift)

Food Management Search, Inc. • Cedarburg (WI)

On-site
USD 58,000 - 71,000
401(k) match
Health/dental benefits