3rd Shift Senior Process Control Technician – Cold-Chamber Die Casting

Software Placement Group

Cedarburg (WI)

On-site

USD 47,000 - 66,000

Full time

14 days+

Get a reply from this recruiter

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

401(k) match
Health/dental/vision benefits
Attendance PTO bonus hours

Job summary

Software Placement Group is seeking a Senior Process Control Technician for a 3rd shift role in Cedarburg, Wisconsin, to monitor and optimize high-pressure aluminum die casting processes. The position focuses on defect analysis, yield improvement, and maintaining strict OEM quality standards.

The ideal candidate has 2+ years in process control in manufacturing, strong analytical skills, and US work authorization. The role offers a direct-hire path, competitive hourly pay, and full benefits.

Qualifications

  • Strict 2+ years tenure at each previous employer.
  • 2+ years hands-on process control experience in manufacturing (aluminum die casting, plastics or metalworking preferred).
  • Strong problem-solving skills to interpret process data and quality reports.
  • Must reside within 45-minute commute of Cedarburg, WI area.
  • High School Diploma or GED; technical diploma or metallurgical degree preferred; US work authorization without sponsorship.

Responsibilities

  • Monitor and analyze critical process variables including temperatures, shot profiles, injection speeds, and cycle times.
  • Perform root-cause analysis on defects such as porosity and cold shuts.
  • Set up, tune and validate die casting process parameters for launches and runs.
  • Create and maintain setup sheets and operating instructions for technicians and operators.
  • Collaborate with quality and engineering to validate changes and improve first-pass yield.
  • Review real-time process data and X-ray results to ensure customer specifications are met.
  • Coach operators on standardized process parameters and best practices.

Skills

Process control
Root-cause analysis
X-ray data review
Manufacturing troubleshooting

Education

High School Diploma or GED

Tools

X-ray inspection software
Robotic automation
Shot monitoring software

Job description

3rd Shift Senior Process Control Technician – Cold-Chamber Die Casting

Up to $41.00/hr ($85,280/yr) + 401(k) Match & Bonuses Cedarburg, WI Area 3rd Shift Direct-Hire

  • Pay & Incentives: Baseline starting pay up to $41.00/hr ($85,280/yr baseline scaling directly with experience) + pay-for-performance bonus opportunities, 401(k) with company match, full health/dental/vision benefits, and attendance PTO bonus hours.
  • Work Pattern/Schedule: Dedicated 3rd Shift schedule providing steady night-shift routine stability in a high-volume precision manufacturing setting.
  • Environment & Company Profile: Direct-hire seat with one of North America’s largest independent die casting manufacturers; ISO-certified facility featuring exceptional employee stability (40% of staff over 10+ years tenure) and premier tier-one OEM partnerships.
  • Core Functional Scope: Monitor and optimize high-pressure aluminum die casting process parameters (shot profiles, melt temps, intensification pressures), perform root-cause defect analysis (porosity, cold shuts, soldering), review X-ray data, and maximize first-pass yield.
  • Strict Requirements & Authorization: Requires strict career stability (minimum 2+ years per employer), 2+ years of process control or technical troubleshooting experience in manufacturing, US work authorization, and a local commute within 45 minutes of Cedarburg, WI.

A premier, North American market leader in high-precision die casting is seeking a driven Process Control Technician to oversee and optimize process integrity on their 3rd shift production floor. Responsible for monitoring critical variables on automated, high-pressure aluminum casting cells, this seat plays a direct role in driving down scrap, troubleshooting complex part defects, and ensuring strict compliance with tier-one OEM quality standards.

Joining an ISO-certified facility where 40% of the team boasts over a decade of tenure, this direct-hire position offers outstanding hourly earnings, long-term stability, strong 401(k) matching, and structured career advancement opportunities in a supportive, team-first environment.

What You Will Be Doing (Daily Responsibilities)
  • Monitor Process Parameters: Continuously track and analyze critical variables including melt temperatures, shot profiles, injection speeds, intensification pressures, cycle times, and die lubrication.
  • Analyze & Resolve Casting Defects: Perform root-cause analysis on defect issues such as porosity, cold shuts, soldering, blisters, flash, misruns, and thermal shrinkage.
  • Optimize Machine Parameters: Set up, fine-tune, and validate die casting process parameters for new product launches, die tryouts, and existing production runs.
  • Maintain Process Standardization: Establish, document, and maintain accurate process setup sheets and operating instructions for setup techs and machine operators.
  • Execute Production Trials: Collaborate with quality and engineering teams to validate process changes, improve first-pass yield, and minimize scrap rates.
  • Support Quality & Inspection: Utilize real-time process monitoring systems and review X-ray inspection data to ensure parts meet customer specifications.
  • Train Floor Personnel: Coach and train machine operators and setup technicians on standardized process parameters and operational best practices.
What We Are Looking For (Requirements & Qualifications)
  • Job Stability Required: Demonstrated career stability with a strict requirement of at least 2+ years of tenure at each previous employer.
  • Manufacturing Process Experience: 2+ years of hands-on experience in process control within a manufacturing environment (aluminum die casting, plastic injection molding, or metalworking preferred).
  • Technical & Analytical Aptitude: Strong problem-solving skills with the ability to interpret process monitoring data, thermal profiles, and quality reports.
  • Commutable Radius: Must reside within a 45-minute maximum commute of the Cedarburg / Greater Milwaukee, WI area.
  • Education & Authorization: High School Diploma or GED required; technical diploma or vocational degree in manufacturing technology or metallurgy preferred. Must be fully authorized to work in the United States without sponsorship.
Preferred Technical Assets (Bonus Skills)
  • Die Cast & Vacuum Systems: Specialized background in high-pressure aluminum die casting, vacuum-assisted die casting, or molten metal thermal management.
  • Automation & Quality Standards: Familiarity with robotic automation, real-time shot monitoring software, X-ray inspection analysis, and IATF 16949 quality guidelines.
  • Lean & Continuous Improvement: Practical experience with Six Sigma methodology, 5S, Pareto analysis, or formal root-cause analysis frameworks.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Overnight Lead Die Casting Technician
Overnight Lead Die Casting Technician

Sterling St James LLC • Cedarburg (WI)

On-site
USD 47,000 - 66,000
3rd Shift Senior Process Control Technician – Cold-Chamber Die Casting
3rd Shift Senior Process Control Technician – Cold-Chamber Die Casting

Calqulate Metrics Ltd • Cedarburg (WI)

On-site
USD 47,000 - 66,000
401(k) Match
Health/Dental/Vision benefits
Attendance PTO bonus hours
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)

Calqulate Metrics Ltd • Cedarburg (WI)

On-site
USD 47,000 - 66,000
401(k) Match
Bonuses
Health/dental/vision benefits
+1
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)

H.T. Prof Executive Search • Cedarburg (WI)

On-site
USD 47,000 - 66,000
Die Cast Setup Technician – High-Pressure Aluminum (2nd Shift)
Die Cast Setup Technician – High-Pressure Aluminum (2nd Shift)

Mindscope • Cedarburg (WI)

On-site
USD 59,000 - 85,000
401(k) with match
Full benefits
Bonus PTO opportunities
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)
Die Cast Changeover Specialist – High-Pressure AL & Hydraulics (2nd Shift)

Software Placement Group • Cedarburg (WI)

On-site
USD 34,000 - 56,000
401(k) Match
Bonuses
Health/Dental/Vision benefits
+1
2nd Shift QC Technician – CMM Metrology & IATF 16949 Foundry
2nd Shift QC Technician – CMM Metrology & IATF 16949 Foundry

Impact Solutions • Cedarburg (WI)

On-site
USD 47,000 - 66,000
Industrial Melt & Furnace Operator – Aluminum Die Casting (3rd Shift)
Industrial Melt & Furnace Operator – Aluminum Die Casting (3rd Shift)

H.T. Prof Executive Search • Cedarburg (WI)

On-site
USD 35,000 - 50,000
401(k) with company match
Health/dental benefits
Bonus PTO for attendance
Quality Control Technician – High-Pressure Die Casting & GD&T (2nd Shift)
Quality Control Technician – High-Pressure Die Casting & GD&T (2nd Shift)

Software Placement Group • Cedarburg (WI)

On-site
USD 47,000 - 66,000
Quality Control Technician – High-Pressure Die Casting & GD&T (2nd Shift)
Quality Control Technician – High-Pressure Die Casting & GD&T (2nd Shift)

Calqulate Metrics Ltd • Cedarburg (WI)

On-site
USD 47,000 - 66,000
401(k) match
Attendance PTO bonus hours
Bonuses and full benefits
+1