Forward Deployed Controls Engineer (Engineer / Senior)

Deterrence Defense, Inc.

United States

Remote

USD 90,000 - 150,000

Full time

5 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Deterrence Defense, Inc. in the United States seeks a Forward Deployed Controls Engineer to commission, tune, and ramp automated manufacturing equipment at production sites. This field role is remote-based with 50% travel and multi-week deployments.

You will modify Siemens TIA Portal and Ignition SCADA code in the field, validate safety functions, and train site staff while feeding lessons back to the core team. Senior engineers may mentor teammates and lead deployments.

Qualifications

  • Bachelor’s degree in Electrical, Controls, Mechatronics, or related engineering field
  • 2+ years (engineer) or 5+ years (senior) in industrial controls with field commissioning on production equipment
  • Proficiency with Siemens TIA Portal and Ignition SCADA
  • Experience commissioning and ramping equipment on a live production floor
  • Knowledge of machine safety standards and safety-rated motion
  • Ability to read electrical schematics and panel drawings
  • Revision-control experience (GitHub, Siemens Project Server, or similar)
  • Willingness to travel 50% including extended deployments and occasional off-hours/weekend support
  • Valid driver’s license and ability to travel domestically
  • Strong communication with customer/site teams under schedule pressure

Responsibilities

  • Lead on-site installation support and SAT for automated production equipment
  • Ramp equipment to target throughput by tuning cycle times and parameters
  • Modify and optimize Siemens PLC programs in ST, LAD, FBD, and SFC
  • Adjust Ignition HMI/SCADA screens and alarms for operations
  • Commission and tune servos, VFDs, vision systems, sensors, and safety devices
  • Validate safety functions in the field against design intent and standards
  • Integrate FANUC robot cells with PLC and safety controllers
  • Bring up and troubleshoot Profinet, OPC UA, Modbus TCP, and Ethernet/IP networks
  • Troubleshoot live production floor faults and root cause analysis
  • Train site operators and maintenance staff; provide handoff documentation
  • Capture field issues and feedback to core engineering team

Skills

Siemens TIA Portal
Ignition SCADA
Electrical schematics reading
GitHub revision control
Travel readiness

Education

Bachelor’s degree in Electrical, Controls, Mechatronics, or related engineering field

Tools

Siemens Project Server
GitHub

Job description

Remote with travel

Summary

The Forward Deployed Controls Engineer commissions, tunes, and ramps Deterrence’s automated manufacturing equipment at production sites across our deployed footprint. This is a hands‑on field execution role. You will be on site bringing equipment from installation through I/O checkout, SAT, and production ramp. You’ll adapt, debug, and optimize PLC, HMI/SCADA, robot, and safety code in the field, and you’ll feed lessons learned back to the core controls engineering team. Primary platforms are Siemens TIA Portal, Ignition SCADA, and FANUC robotics. The role is remote-based and requires 50% travel, often in multi‑week deployments. We are hiring multiple engineers across levels, and scope and independence scale with level.

Key Responsibilities
  • Lead on-site installation support, I/O checkout, system bring‑up, and SAT for automated production equipment.
  • Ramp equipment to target throughput, uptime, and quality by tuning cycle times, motion, and process parameters.
  • Modify, debug, and optimize existing Siemens PLC programs in ST (SCL), LAD, FBD, and SFC, and maintain all field changes under revision control.
  • Adjust and extend Ignition HMI/SCADA screens, alarming, and faceplates to support operations and site‑specific needs.
  • Commission and tune servos, VFDs, vision systems, sensors, and safety devices (ProfiSafe, fail‑safe I/O).
  • Validate safety functions in the field against the design intent and applicable standards (ISO 13849, IEC 61508, ISO 10218).
  • Integrate, touch up, and validate FANUC robot cells with PLC and safety controllers.
  • Bring up and troubleshoot Profinet, OPC UA, Modbus TCP, and Ethernet/IP device networks.
  • Troubleshoot controls, network, and electromechanical faults to root cause on a live production floor.
  • Train site operators, technicians, and maintenance staff, and produce clear handoff documentation.
  • Capture field issues, punch lists, and design improvement recommendations, and feed them back to the core engineering team.
Qualifications
  • Bachelor’s degree in Electrical, Controls, Mechatronics, or a related engineering field, or equivalent experience.
  • Engineer: 2+ years · Senior: 5+ years in industrial controls, with significant field commissioning on production equipment.
  • Hands‑on proficiency with Siemens TIA Portal, plus experience with Ignition or comparable SCADA.
  • Demonstrated experience commissioning and ramping equipment on a live production floor.
  • Working knowledge of machine safety standards and safety‑rated motion.
  • Ability to read and troubleshoot from electrical schematics and panel drawings.
  • Revision control experience (GitHub, Siemens Project Server, or similar).
  • Ability and willingness to travel 50%, including extended on‑site deployments and occasional off‑hours or weekend support during ramp.
  • Valid driver’s license and the ability to travel domestically.
  • Strong communication skills and comfort working directly with customer and site teams under schedule pressure.

Senior additionally runs commissioning for a full equipment line with minimal direction, serves as the lead controls contact for the site team, and mentors Engineer-level teammates.

Preferred Skills
  • FANUC robot programming (TP/KAREL) or FANUC certification.
  • Ignition Core Certification or higher.
  • ROBOGUIDE or other virtual commissioning tools for pre‑deployment testing.
  • Brownfield retrofit and multi‑vendor integration experience.
  • Industrial networking fundamentals (VLANs, managed switches, network diagnostics).
  • Experience ramping equipment against OEE, throughput, or yield targets.
  • Prior forward deployed, field service, or startup engineering experience.
Export Control.

This position may require access to information controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be a U.S. person as defined in 22 CFR 120.62 (U.S. citizen, lawful permanent resident, or protected individual) or be eligible to obtain any required authorization.

Equal Opportunity.

Deterrence Defense, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. We are committed to working with and providing reasonable accommodations to applicants with disabilities; if you need an accommodation at any point in the process, contact jobs@deterrence.com.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Forward Deployed Manufacturing Engineer (Engineer / Sr)
Forward Deployed Manufacturing Engineer (Engineer / Sr)

Deterrence Defense, Inc. • United States

Remote
USD 90,000 - 130,000
Senior Forward‑Deployed Controls Engineer (Remote, 50% Travel)
Senior Forward‑Deployed Controls Engineer (Remote, 50% Travel)

Deterrence Defense, Inc. • United States

Remote
USD 90,000 - 150,000
Controls Engineer (Engineer / Senior / Staff)
Controls Engineer (Engineer / Senior / Staff)

Deterrence Defense, Inc. • Dallas (TX)

On-site
USD 90,000 - 120,000
Controls Engineer
Controls Engineer

Soap Creek Resources • Town of Wausau (WI)

On-site
USD 85,000 - 110,000
Lead Industrial Controls Engineer
Lead Industrial Controls Engineer

ST Engineering MRAS • Middle River (MD)

On-site
USD 101,000 - 140,000
Medical, Dental, and Vision coverage
Health Flexible Spending Accounts
Free On-site Gym
+4
Controls and Automation Engineer
Controls and Automation Engineer

Automationtechies • Albuquerque (NM)

On-site
USD 80,000 - 110,000
Medical and dental insurance
401(k) matching
Employee Stock Ownership Plan (ESOP)
+3
Controls Engineer
Controls Engineer

Pentangle Tech Services | P5 Group • Reno (NV)

On-site
USD 75,000 - 95,000
Controls Engineer II
Controls Engineer II

Jennmar Automation • Wyoming (MI)

On-site
USD 90,000 - 140,000
Medical benefits (PPO) and wellness
Voluntary 401k plan with company match
Telemedicine services
Sr. Controls Engineer
Sr. Controls Engineer

CyberCoders • Champaign (IL)

On-site
USD 105,000 - 140,000
Paid holidays
PTO
Health/dental/vision
+5
Lead Control Systems Engineer
Lead Control Systems Engineer

Garmac • Reno (NV)

On-site
USD 110,000 - 160,000
Medical, dental, and vision coverage
401(k) with company match
Paid time off
+3