Flagger

Pittman Construction; Conyers (GA); On-site; USD 25,000 - 39,000; Full time

Job summary

Pittman Construction is seeking a dedicated road construction flagger to manage traffic flow at work zones in Conyers, GA. You will direct vehicles and pedestrians using paddles, flags, and radios, while coordinating with other flaggers to maintain smooth, safe traffic movement.

This role demands high attention to detail, strong communication, and the ability to work outdoors in varying conditions. Training and certification may be provided as needed.

Qualifications

• Must understand and follow traffic control standards and safety regulations.
• Ability to direct vehicles and pedestrians with clear signals and paddles.
• Experience cooperating with other flaggers and site supervisors.

Responsibilities

• Direct traffic using stop/slow paddles, flags, or illuminated wands to guide vehicles and pedestrians through work zones safely.
• Coordinate with fellow flaggers and supervisors via radios or hand signals to alternate traffic in single-lane closures and align with ongoing site operations.
• Set up, monitor, and remove traffic control devices, including cones, barricades, warning signs, and message boards, ensuring visibility and compliance with standards.
• Inform motorists about detours, lane shifts, and expected delays; answer basic questions courteously and concisely.
• Monitor traffic behavior for hazards and adjust control patterns or notify the crew as needed.
• Maintain work zone safety by staying alert to moving equipment, changing conditions, and emergency needs; assist emergency vehicles through the zone.
• Document and report negligent or noncompliant drivers to supervisors and, when required, law enforcement.
• Assist crews with site safety tasks such as clearing debris that impacts traffic control, when appropriate and safe.

Skills

Signaling

Communication

Situational awareness

Stamina

Traffic laws

Teamwork

Reliability

Safety mindedness

Education

High school diploma or GED

Driver's license

ATSSA or state flagger cert

MUTCD familiarity

On-the-job training

Tools

Radios

Paddles/flags

Signage equipment

Job description

A road construction flagger is responsible for directing vehicles and pedestrians safely through or around work zones, protecting both the crew and the public by controlling traffic flow with signs, paddles, and hand signals. The role involves constant situational awareness, clear communication, and adherence to traffic control standards and safety regulations.

Core duties

• Direct traffic using stop/slow paddles, flags, or illuminated wands to guide vehicles and pedestrians through work zones safely.
• Coordinate with fellow flaggers and supervisors via radios or hand signals to alternate traffic in single-lane closures and align with ongoing site operations.
• Set up, monitor, and remove traffic control devices, including cones, barricades, warning signs, and message boards, ensuring visibility and compliance with standards.
• Inform motorists about detours, lane shifts, and expected delays; answer basic questions courteously and concisely.
• Monitor traffic behavior for hazards (speeding, confusion, near-misses) and adjust control patterns or notify the crew as needed.
• Maintain work zone safety by staying alert to moving equipment, changing conditions, and emergency needs; assist emergency vehicles through the zone.
• Document and report negligent or noncompliant drivers (e.g., recording license plates) to supervisors and, when required, law enforcement.
• Assist crews with site safety tasks such as clearing debris that impacts traffic control, when appropriate and safe.

Skills and requirements

• Strong communication and nonverbal signaling; ability to give clear, decisive directions under pressure.
• High attention to detail, vigilance, and situational awareness in dynamic, high-risk environments.
• Physical stamina to stand for long periods and work outdoors in all weather conditions, including heat, cold, and low light.
• Knowledge of traffic laws, work zone standards, and the proper placement/use of signs, cones, and barriers.
• Teamwork and coordination with supervisors, equipment operators, and other flaggers.
• Reliability, professionalism, and the ability to remain calm and courteous with the public.

Typical qualifications

• High school diploma or GED.
• Valid driver’s license.
• Work zone flagger certification as required by state or employer (e.g., ATSSA or state-approved training); refresher training at specified intervals.
• Familiarity with the MUTCD and applicable state DOT work zone guidelines.
• Prior construction or traffic control experience preferred but often not required; employers may provide on-the-job training.

Working conditions

• Outdoor, roadside environments with exposure to weather, noise, dust, and moving traffic.
• Extended shifts, possible nights, weekends, and variable schedules based on project needs.
• Use of required PPE: high-visibility apparel (ANSI/ISEA-compliant), hard hat, safety footwear, and, as needed, eye/ear protection and gloves.

Success indicators

• Zero-incident traffic control with smooth vehicle flow and minimal delays.
• Proper, compliant setup and maintenance of traffic control devices throughout the shift.
• Effective coordination with site activities and rapid, appropriate response to changing conditions or emergencies.
• Accurate documentation and clear reporting of incidents and hazards.

• Professional Attitude & conduct
• Multi-task, interpersonal communication, problem solving, and time management skills are needed.
• High degree of safety awareness and safety discipline
• Display a professional and courteous attitude to co-workers, supervisors and the general public at all times.
• Willing to travel and work away from home when and if required.
• Be willing to work nights and weekends when necessary.
• Strictly adhere to safety requirements and the policies and procedures as outlined in the Employee Handbook.
• Have the willingness to work in a team environment and assist co–workers or supervisors with other duties as required.
• Wear personal protective equipment (PPE) in designated operations and production areas as stated by Pittman Construction Safety and OSHA.
• Be at least age 18 years of age due to nature of working environment.
• You will be expected to be flexible to the needs of our business, as we continually strive to meet and exceed the needs of our customers.
• Random and Suspicion Drug tests are performed
• Please be aware that you must successfully complete a drug screen and background check in order to be hired into the Pittman Construction.

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Pittman Construction is an Equal Opportunity Employer who strives to provide an inclusive work environment that involves everyone and embraces the diverse talent of its people.

Equal Opportunity Employer/Minorities/Females/Disabled/Veterans

Where required by state law and/or city ordinance; this employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization.

The ability to work a full shift, come to work on time, work overtime as needed and the ability to work according to the necessary schedule to meet job requirements with or without reasonable accommodation is an essential function of this position