Fitout Apprentice

Austal

Mobile (AL)

On-site

USD 21,000 - 30,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Austal USA in Mobile, AL invites applicants to join a four-year Fitout apprenticeship program. You will train across interior and exterior fitout trades, learn to interpret ship drawings, and practice the safe use of tools and machinery while completing hands-on on-the-job learning.

Applicants must meet the program’s academic and reliability standards, and will coordinate with apprentice instructors and the production supervisor for assignments and assessments throughout the training.

Qualifications

  • Academic ability to succeed in the program.
  • Motivation to continuously improve knowledge and skills.
  • Ability to measure using Metric and English system.
  • Ability to read and interpret ship drawings and blueprints.
  • Commitment to safety and following procedures.

Responsibilities

  • Complete the US Department of Labor curriculum totaling 576+ academic hours and 8000 hours of on-the-job learning.
  • Maintain an academic average with a minimum score of 70% and a minimum performance assessment of ‘meets standards’.
  • Perform duties aligned with Fitout trade positions over the four-year apprenticeship.
  • Learn layout methods and how to read ship drawings and blueprints.
  • Learn use of tools and machinery safely and effectively.
  • Assist trades and supervisors as directed and support production tasks.

Skills

Math skills
Metric & English units
Read ship drawings
Attention to safety
Reliability & time-keeping

Education

Related technical training program

Job description

REPORTS TO: Fitout Apprentice Instructor/Production SupervisorSUPERVISES: N/AAUTHORITIES / RESPONSIBILITIES:Required to successfully complete the US Department of Labor curriculum consisting of 576+ academic hours and 8000 hours of on–the-job learning (OJL).Must maintain an academic average with a minimum score of 70% and maintain a minimum performance assessment of ‘meets standards’.Must perform corresponding job duties and responsibilities to the applicable trade positions over the course of the four-year apprenticeshipTrades AssistantB ClassA Class· Assists or works with other trades or Austal USA employees as directed (May be assigned tasks outside craft as required)Commit to learning all aspects of Fitout trades:Learn the different type of measurements in standard and metric increments.Learn layout methods for different parts of the ship and methods of manufacturing them.Learn the how to read, interpret, decipher and navigate different ship drawings and blueprints.Learning the proper use of variety of tools and machinery.Interior Fitout- Fabrication of furniture, components, modules, & installation of furnitureExterior Fitout- Install external doors & hatchesSFP- Install insulation & smoke barriersHVAC- Install HVAC duct & equipmentPractice safe working habits when using power tools and machineryMiscellaneous tasks as directed by supervisor or instructorQUALIFICATIONS/KNOWLEDGE/EXPERIENCE: To be considered qualified for a position as an Apprentice, an individual must:Possess the academic ability to succeed in the programDemonstrate the motivation to continuously improve their knowledge/skillsHave the integrity to complete all assigned academic work independentlyDemonstrate a high degree of reliability, both in task accomplishment and time keepingAbility to measure using Metric and English systemKnowledge of shipyard terminology such as general ship structure and vessel layout preferred.The ability to understand directions and follow instructions; both oral and writtenDemonstrate applied math skills equivalent ACT WorkKeys Level 3Must have successfully completed a related technical training program or have the equivalent craft work experienceundefinedundefinedTOOLS: Must be able and willing to learn and retain information on company and trade procedures, materials, applicable tool usage, safety items, and equipment for the applicable trade of interest. An apprentice will be required to obtain a personal tool set as directed by craft management.DIRECTION: NoneDISCRETION EXERCISED:Must maintain a positive attitude during all aspects of trainingMust exhibit a genuine interest in acquiring applicable information in course content, safety items, company policies, on-the job learning and leadership training.Must adhere to Code of Conduct with respect to professionalism and ethicsLIAISES WITH: Applicable trade apprentice instructor(s) for academic assignment and progress, assigned production supervisor for production job assignments and assessments, Apprentice Training Coordinator and Manager for program questions and issuesPHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit. Specific physical requirements include the following:1. Must have the ability to bend, squat, stoop, crawl, and kneel.2. Perform prolonged standing.3. Ability to turn head from side to side and about the vertical axis.4. Ability to turn body at the waist from side to side and about the vertical axis.5. Lift/push/pull 50lbs to 75lbs on an occasional basis.6. Lift/push/pull up to 20lbs on a frequent basis.7. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).8. Ability to work at heights above 12’ while working from ladders, scaffolding and/or man lifts.9. Able to work at a variety of levels (ex. waist, eye, overhead).10. Demonstrate the ability to safely and appropriately use required tools and equipment.11. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.12. Possess sufficient handgrip and coordination to carry and operate tools and equipment.13. Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.14. Ability to withstand cold and hot temperatures.15. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time.16. Able to respond to verbal and audible sounds/commands.17. Able to utilize adequate visual skills.18. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.19. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.WORK ENVIRONMENTThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud, + 90 dB.SAFETYMust comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.ADDITIONAL GUIDELINES:Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA:·18 years of age or older at time of application·Able to provide proof of US Person Status·No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date·No felony convictions of Drug crimes within three years from disposition date·Willing to submit to a drug screen·Willing to submit to a background checkEqual Employment CommitmentAny qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932.Austal’s commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Fabrication Apprentice
Fabrication Apprentice

Austal • Mobile (AL)

On-site
USD 21,000 - 30,000
Pipe Fitting Apprentice
Pipe Fitting Apprentice

Austal USA • Mobile (AL)

On-site
USD 32,000 - 42,000
A Class Pipe Fitter - SDCA
A Class Pipe Fitter - SDCA

Austal • National City (CA)

On-site
USD 58,000 - 63,000
Pipe Welder Apprentice at Austal Mobile, AL
Pipe Welder Apprentice at Austal Mobile, AL

Comunidade Metodista • Mobile (AL)

On-site
USD 32,000 - 45,000
ACCURACY CONTROL INSPECTOR II
ACCURACY CONTROL INSPECTOR II

Austal USA • Mobile (AL)

On-site
USD 55,000 - 75,000
Safety Representative
Safety Representative

Austal • Mobile (AL)

On-site
USD 65,000 - 90,000
A Class Structural Fitter
A Class Structural Fitter

Austal USA • Mobile (AL)

On-site
USD 65,000 - 90,000
Mechanical Engineer IV
Mechanical Engineer IV

Austal USA LLC • Mobile (AL)

On-site
USD 90,000 - 130,000
A Class Outside Machinist - SDCA
A Class Outside Machinist - SDCA

Austal • National City (CA)

On-site
USD 88,000 - 93,000
Electrical Manager
Electrical Manager

Austal USA • Mobile (AL)

On-site
USD 90,000 - 120,000