Pipe Fitting Apprentice

Austal USA

Mobile (AL)

On-site

USD 32,000 - 42,000

Full time

5 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Austal USA is seeking applicants for a four-year apprentice program focused on Pipe Fitter trades. The role emphasizes completing the US DOL curriculum (576+ hours) and 8000 hours of on-the-job learning.

Candidates must maintain a minimum 70% average and 'meets standards' performance, learning through hands-on projects and shipyard drawings. This on-site program provides structured training and safety-focused practice.

Qualifications

  • Must complete the US Department of Labor curriculum (576+ hours) and 8000 hours of on-the-job learning (OJL).
  • Maintain an academic average of at least 70% and a performance assessment of 'meets standards'.
  • Perform duties to applicable trade positions (Trades Assistant, B Class, A Class) over four years.
  • Must measure in both metric and English systems and understand shipyard terminology.
  • Ability to read, interpret ship drawings and blueprints; follow instructions; perform applied math.
  • Related technical training or equivalent craft work experience required.

Responsibilities

  • Complete apprenticeship curriculum and OJL under supervision.
  • Support or work with Austal USA employees on assigned tasks.
  • Learn pipe fitter trade through multiple hands-on activities.
  • Develop skills in reading drawings, measuring, layout, and fabrication methods.
  • Practice safe use of tools and machinery; follow safety protocols.
  • Perform miscellaneous tasks as directed by supervisor or instructor.

Skills

Measurements (metric & English)
Reading ship drawings
Layout methods
Tool usage
Pipe fabrication
Safety practices
On-the-job learning

Education

Related technical training program

Tools

Trade tools proficiency

Job description

REPORTS TO:

Applicable Trade Apprentice Instructor/Production Supervisor

SUPERVISES:

N/A

AUTHORITIES / RESPONSIBILITIES:
  • Required to successfully complete the US Department of Labor curriculum consisting of 576+ academic hours and 8000 hours of on–the-job learning (OJL).
  • Must maintain an academic average with a minimum score of 70% and maintain a minimum performance assessment of ‘meets standards’.
  • Must perform corresponding job duties and responsibilities to the applicable trade positions over the course of the four-year apprenticeship
    • Trades Assistant
    • B Class
    • A Class

Assists or works with other trades or Austal USA employees as directed (May be assigned tasks outside craft as required)

  • Commit to learning all aspects of Pipe Fitter trades:

  • Learn the different type of measurements in standard and metric increments.

  • Learn the how to read, interpret, decipher and navigate different ship drawings and blueprints.

  • Learn layout methods for different parts of the ship and methods of manufacturing them.

  • Learning the proper use of variety of tools and machinery for cutting, burning, bending, etc.

  • Learn the different types of pipe fabrication.

  • Learn the different methods to manufacture of offsets, miters, saddles, laterals, etc.

  • Practice safe working habits when using power tools and machinery

  • Miscellaneous tasks as directed by supervisor or instructor

QUALIFICATIONS/KNOWLEDGE/EXPERIENCE:

To be considered qualified for a position as an Apprentice, an individual must:

  • Possess the academic ability to succeed in the program
  • Demonstrate the motivation to continuously improve their knowledge/skills
  • Have the integrity to complete all assigned academic work independently
  • Demonstrate a high degree of reliability, both in task accomplishment and time keeping
  • Ability to measure using Metric and English system
  • Knowledge of shipyard terminology such as general ship structure and vessel layout preferred.
  • The ability to understand directions and follow instructions; both oral and written
  • Demonstrate applied math skills equivalent ACT WorkKeys Level 3
  • Must have successfully completed a related technical training program or have the equivalent craft work experience
  • undefined
  • undefined
TOOLS:

Must be able and willing to learn and retain information on company and trade procedures, materials, applicable tool usage, safety items, and equipment for the applicable trade of interest. An apprentice will be required to obtain a personal tool set as directed by craft management.

DIRECTION:

None

DISCRETION EXERCISED:
  • Must maintain a positive attitude during all aspects of trainingMust exhibit a genuine interest in acquiring applicable information in course content, safety items, company policies, on-the job learning and leadership training.Must adhere to Code of Conduct with respect to professionalism and ethics
LIAISES WITH:

Applicable trade apprentice instructor(s) for academic assignment and progress, assigned production supervisor for production job assignments and assessments, Apprentice Training Coordinator and Manager for program questions and issues

PHYSICAL DEMANDS:
  • While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit.Specific physical requirements include the following:

1. Must have the ability to bend, squat, stoop, crawl, and kneel.

2. Perform prolonged standing.

3. Ability to turn head from side to side and about the vertical axis.

4. Ability to turn body at the waist from side to side and about the vertical axis.

5. Lift/push/pull 50lbs to 75lbs on an occasional basis.

6. Lift/push/pull up to 20lbs on a frequent basis.

7. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).

8. Ability to work at heights above 12’ while working from ladders, scaffolding and/or man lifts.

9. Able to work at a variety of levels (ex. waist, eye, overhead).

10. Demonstrate the ability to safely and appropriately use required tools and equipment.

11. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.

12. Possess sufficient handgrip and coordination to carry and operate tools and equipment.

13. Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.

14. Ability to withstand cold and hot temperatures.

15. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time.

16. Able to respond to verbal and audible sounds/commands.

17. Able to utilize adequate visual skills.

18. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.

19. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • While performing the duties of this job, the employee is regularly exposed to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud, + 90 dB.
SAFETY
  • Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
ADDITIONAL GUIDELINES:
  • Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA:
  • 18 years of age or older at time of application
  • Able to provide proof of US Person Status
  • No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
  • No felony convictions of Drug crimes within three years from disposition date
  • Willing to submit to a drug screen
  • Willing to submit to a background check
Equal Employment Commitment

Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932.

Austal’s commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Pipe Welder Apprentice at Austal Mobile, AL
Pipe Welder Apprentice at Austal Mobile, AL

Comunidade Metodista • Mobile (AL)

On-site
USD 32,000 - 45,000
A Class Pipe Fitter
A Class Pipe Fitter

Austal USA • Mobile (AL)

On-site
USD 52,000 - 78,000
A Class Pipe Fitter
A Class Pipe Fitter

Austal USA • Alabama

On-site
USD 45,000 - 60,000
A Class Pipe Welder
A Class Pipe Welder

Austal USA • Mobile (AL)

On-site
USD 35,000 - 55,000
A Class Structural Fitter
A Class Structural Fitter

Austal USA • Mobile (AL)

On-site
USD 65,000 - 90,000
B Class Outside Machinist Submarines
B Class Outside Machinist Submarines

Austal USA • Mobile (AL)

On-site
USD 42,000 - 68,000
Electrical Manager
Electrical Manager

Austal USA • Alabama

On-site
USD 85,000 - 110,000
Senior Electrical Production Manager (Shipbuilding)
Senior Electrical Production Manager (Shipbuilding)

Austal USA • Alabama

On-site
Confidential
A Class Pipe Fitter - SDCA
A Class Pipe Fitter - SDCA

Austal • National City (CA)

On-site
USD 58,000 - 63,000
A Class Structural Welder
A Class Structural Welder

Austal USA • Mobile (AL)

On-site
USD 39,000 - 56,000