Facilities Technician IV

ITT Aerospace Controls LLC; California; On-site; USD 80,000 - 110,000; Full time

Job summary

ITT Aerospace Controls LLC in Valencia, CA seeks a Senior Facilities Technician IV to troubleshoot, repair, maintain, and install production equipment and facility systems ensuring safe, efficient manufacturing operations.

Responsibilities include preventive maintenance on CNC lathes/mills, adherence to LOTO/ NFPA 70E, and coordinating equipment moves with heavy rigging. Must read schematics and work with Emaint work orders.

Qualifications

• Reads and interprets blueprints, electrical/pneumatic/hydraulic schematics.
• Performs electrical/mechanical troubleshooting and repairs on complex systems.
• Follows LOTO and NFPA 70E safety requirements and enforces safety rules.

Responsibilities

• Trouble-shoot, repair, service, overhauls on major production equipment.
• Schedule and perform preventive maintenance on CNC lathes/mills, compressors, ovens, test stands and autoclaves.
• Maintain detailed Emaint work orders and records of corrective/PM tasks.
• Install and move machinery using heavy rigging and safe practices.
• Diagnose issues and replace worn parts; support equipment moves and installations.
• Handle hazardous materials and maintain 6S standards in the workplace.

Skills

English literacy

Blueprints & schematics

Electrical troubleshooting

Hydraulic systems

Mechanical systems

LOTO & NFPA70E

Forklift operation

Rigging & lifts

Education

HS Diploma or equivalent

Tools

Emaint

PLC

Job description

Facilities Technician IV

US-CA-Valencia

Job ID: 2026-18486

# of Openings: 1

Category: Service

US-CA-Valencia -1166

Overview

Position Summary Senior Facilities Service Technician The Senior Facilities Service Technician is responsible for troubleshooting, repairing, maintaining, and installing production equipment and facility systems to support safe and efficient manufacturing operations. This role performs preventive and corrective maintenance, diagnoses complex equipment issues, ensures compliance with safety regulations including LOTO and NFPA 70E standards, maintains maintenance records, and supports equipment moves, installations, and continuous improvement initiatives.

Responsibilities

• Troubleshoot, repair, service, overhaul on all major production equipment
• Schedule and perform preventative maintenance on CNC lathes and mills, compressors, ovens, test stands autoclaves etc. These will include daily, weekly, monthly, Quarterly, Bi-annual, and annually PMs services.
• Conduct reporting on all Emaint software work orders. Keep detail records of all close and complete corrective and PM related work orders
• Complete understanding and must follow all LOTO and Arc flash policies and regulations in accordance with NFPA 70E standards.
• Training and or certification in LOTO, Arch Flash and NFPA 70E highly desired
• Install and move machinery and equipment when necessary, using heavy machinery and safe rigging practices
• Diagnose operating problems and perform simple to major corrections on various types of machinery with or without assistance
• Replace, rebuild and/or overhaul worn out or broken parts for major production machinery
• Assist in the handling, collecting, disposing/distributing of hazardous materials
• Maintain a safe and clean work area, and understand and follows all 6s standards
• Fabricate machinery guarding as needed

Qualifications

• Requires a minimum of three (3) years' experience in CNC machine tool maintenance and repair, with electrical, hydraulic, and mechanical skills necessary.
• Must be able to read, write and understand English, follow verbal and written instructions, and read and interpret blueprints, electrical, pneumatic, and hydraulic schematics.
• Must be able to understand, trouble shoot and repair high and low voltage electrical and electronic systems. 600v, 480v, 240v,120v,24v,12v,5v etc.
• Must be able to understand, trouble shoot, and repair safety systems on equipment such as light curtains, pressure pads, safety interlocks as well as having the ability to fabricate safety guards for equipment as needed
• Must be able to troubleshoot PLCs, automated systems, robotic systems, multi axis servo system, high air pressure system, high pressure hydraulic systems and vacuum systems.
• Must be able to recover multi- axis CNC lathes and CNC mills when machine is out of sequence or after an impact. Be able to re-align main spindles and turrets on CNC machines to factory specification
• Must be able to understand, trouble shoot, and repair Autoclaves, Electrical ovens, Punch presses, Evaporators, Smog Hogs, Chip Extractors and HVAC units
• Must be able to run Electrical conduit, Hydraulic low- and high-pressure lines, low and high air pressure lines as needed
• Must be able to install 480v, 240v and 120v outlets and light fixtures and needed
• Must be able to use and read a wide variety of precision measuring instruments and all required electrical measuring and testing devices. (Multi meters, temperature test probes, I.R scanner and data recorders)
• Must be able to design, plan and install incoming main source connections for air, gas, water and electrical to new or existing equipment and main facility.
• Must be able to work with outside contractor, vendors, and equipment factory technical support to resolve existing equipment or facility issues. Schedule and arrange onsite support with contractors and factory technical services
• Must be able to show the ability to work well in a team environment as well as alone on assigned projects or daily assignments
• Must be able to operator forklifts, man lifts and scissors for various facility aerial task
• Must be able to lead Tier 1 department operations and safety meeting when Department supervisor or manager is not present
• Must be able to work closely with EH&S manager to find resolutions to safety related issues
• Must be able to work closely with department supervisor and planners to schedule and arrange scheduled repairs or PMs for all critical equipment
• Must be able to work with contractors, factory service and parts vendors to provide formal quotes for onsite service repairs or critical parts needed for equipment or facility repairs
• Must be able to have a 6s understanding and implementation experience
• HS Diploma or equivalent

Physical Requirements

• Regularly stand, walk, bend, stoop, climb, and work around manufacturing equipment.
• Frequently lift, carry, push, and pull up to 35 lbs.
• Work at heights, in confined spaces, and in varying industrial environmental conditions.
• Use required PPE and follow all safety procedures.
• Ability to work overtime and respond to emergency maintenance needs as required.

Safetyis a core value at ITT. Our employees understand and follow all ITT safety policies and procedures, participate in workplace inspections, safety training, and in the development of job safety analyses.

This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

"ITT Corporation is an Equal Opportunity/Affirmative Action employer and all qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status, or any other characteristic protected by law."

PI288190792