Electronics Technician

TSS Solutions

Melbourne (FL)

On-site

USD 28,000 - 36,000

Full time

8 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

TSS Solutions in Melbourne, FL is seeking an Electronics Technician to support repair and manufacturing of radar components. You will troubleshoot, repair, and test digital, analog, and power circuits using ATPs, schematics, and standard lab tools.

You will apply IPC-610/IPC-620 and J-STD-001 standards; document results; and help improve acceptance test procedures. The role demands meticulous work, safety compliance, and collaboration with Engineers to optimize ATPs and processes.

Qualifications

  • Associate degree in Electronics Technology or equivalent.
  • Knowledge of Radar systems and components is beneficial.
  • Familiarity with ESD and IPC standards IPC-610/IPC-620/J-STD-001.

Responsibilities

  • Troubleshooting and Repair: Diagnose and locate faults in complex electronic systems using multimeters, oscilloscopes, and logic analyzers, then repair or replace damaged components.
  • Installation and Setup: Assemble, configure, and wire new electronic equipment, machinery, or communication networks based on blueprint specifications.
  • Calibration and Testing: Follow Acceptance Test Procedures to ensure repaired items meet all Technical Order specifications.
  • Preventative Maintenance: Conduct routine service checks, clean components, and replace worn parts to prevent unexpected failures.
  • Documentation and Compliance: Maintain detailed repair logs, and adhere strictly to health and safety regulations.

Skills

Troubleshooting
Soldering
Reading schematics
Test equipment
Radar experience
Electrical theory

Education

Associate degree in Electronics Technology
Electronics Technician Certificate

Tools

Oscilloscope
Multimeters
Logic analyzers
Power supplies
Spectrum analyzers
Signal generators

Job description

Summary As an Electronics Technician, you play a vital role in the repair and manufacturing work for our radar components. Using standard or custom testing processes as per acceptance test procedures (ATP), you troubleshoot and record results. Applying principles of electronics, electrical circuitry, engineering mathematics, and mechanics, you will also diagnose, repair and test digital, analog, and power circuit systems.

Summary As an Electronics Technician, you play a vital role in the repair and manufacturing work for our radar components. Using standard or custom testing processes as per acceptance test procedures (ATP), you troubleshoot and record results. Applying principles of electronics, electrical circuitry, engineering mathematics, and mechanics, you will also diagnose, repair and test digital, analog, and power circuit systems. You are meticulous about following our company's policies and industry best practices as well as meeting IPC-610, IPC-620 and J-STD-001 standards. To simplify testing, you may create and recommend changes to our acceptance test procedures (ATPs). You'll get great satisfaction out of ensuring exceptional repairs and build quality radar components, so that we can continue to support those who protect national interests and preserve freedom around the world!Essential Functions

  • Troubleshooting and Repair: Diagnose and locate faults in complex electronic systems using multimeters, oscilloscopes, and logic analyzers, then repair or replace damaged components
  • Installation and Setup: Assemble, configure, and wire new electronic equipment, machinery, or communication networks based on blueprint specifications
  • Calibration and Testing: Follow Acceptance Test Procedures to ensure repaired items meet all Technical Order specifications.
  • Preventative Maintenance: Conduct routine service checks, clean components, and replace worn parts to prevent unexpected failures
  • Documentation and Compliance: Maintain detailed repair logs, and adhere strictly to health and safety regulations
Core Competency And Position Requirements
  • All levels of education and experience needed! Entry level, Junior, Mid-Level and Senior level opportunities
  • Some experience electronics troubleshooting and repair
  • Knowledge of Radar systems and components would be beneficial and valuable
  • Understanding of basic electricity and electronic theory
  • Basic understanding of Voltage, Resistance, Ohm's Law, Magnetism, Capacitance, Inductance, Series circuits and parallel circuits, Transformers, transistors, and amplifiers
  • Proficiency in circuit analysis, AC/DC systems, digital logic, and control systems
  • Skills in soldering, assembly, calibration, and troubleshooting electronic components and systems
  • Ability to operate bench drills, or other hand tools to repair and manufacture parts
  • Ability to use the following test equipment: Oscilloscope, Power Supplies, Spectrum Analyzers, Signal Generators
  • Ability to read and interpret schematics and engineering diagrams
  • Familiarity with safety standards and compliance with electronic equipment
  • Strong communication skills for documenting work and collaborating with Engineers to recommend changes in ATPs and specifications to simplify and enhance Processes and Procedures.
  • Strong problem-solving and analytical skills to diagnose and repair complex systems
  • Attention to detail and ability to follow technical procedures accurately.
  • Ability to rely on past experiences and judgment to plan and accomplish goals
  • Quality
    • Document Control
    • Lessons Learned, Feedback Processes
    • Follow Quality Processes, Methods and Procedures
  • General
    • Written Communications
    • Verbal Communications
    • Mechanical Skills
Supervision Received This position is a direct report to the Production Manager.Education And Experience
  • Associate degree in Electronics Technology or Electronics Technician Certificate(s) from accredited school or equivalent work or military experience preferred.
  • Knowledge of Radar systems and components.
  • ESD, IPC-610, IPC-620, and J-STD-001
Physical Factors May require extensive standing or lifting of heavy objects up to 50lbs.Working Conditions This full-time position typically works during our standard business hours with little to no travelFootnote : This job description is for 3 levels, depending on experience and degree, for Jr. Electronics Technician, Electronics Technician, and Sr. Electronics Technician. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Salary: $20.00 - $26.00 per hour
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electronics Technician
Electronics Technician

PlanIT Group • Florida

On-site
USD 42,000 - 62,000
Electronics Technician II
Electronics Technician II

Elbit America, Inc. in • Talladega (AL)

On-site
USD 40,000 - 60,000
Electronics Technician II
Electronics Technician II

Elbit America, Inc. • Talladega (AL)

On-site
USD 45,000 - 65,000
9/80 schedule
401(k) program
Medical, dental, vision
Electronic Technician - RF/RADAR
Electronic Technician - RF/RADAR

Jt4, Llc • Las Vegas (NV)

On-site
USD 48,023 - 56,702
Medical, Dental, Vision Insurance
Life Insurance
401(k) Plan with Employer Match
+1
Electronics Technician
Electronics Technician

PlanIT Group • Clearwater (FL)

On-site
USD 42,000 - 66,000
ELECTRONICS TECHNICIAN I
ELECTRONICS TECHNICIAN I

Drgok • Everett (WA)

On-site
USD 55,000 - 75,000
ELECTRONICS TECHNICIAN I
ELECTRONICS TECHNICIAN I

Delaware Resource Group of Oklahoma, LLC • Everett (WA)

On-site
USD 60,000 - 90,000
Field Engineer - RF/Radar
Field Engineer - RF/Radar

Jt4, Llc • Las Vegas (NV)

On-site
USD 91,062 - 170,456
Medical, Dental, Vision Insurance
Life Insurance
401(k) Plan Options with Employer Match
+1
Electronics Technician
Electronics Technician

Manufacturing Inc • Killingly (CT)

On-site
USD 34,440 - 41,328
Electronic Technician
Electronic Technician

ADP, Inc. • Village of East Syracuse (NY)

On-site
USD 25,000 - 32,000