Electronics Technician
Heads Up Technologies, Inc.
A complete application in a minute — tailored resume and cover letter, ready to send.
Benefits offered by this job
Job summary
Heads Up Technologies, Inc. seeks an Electronics Technician to support new product development and design engineering through hands-on testing, qualification support, and prototype build activities.
You will work with electrical, mechanical, software, and FPGA engineers to move products from concept to manufacturing release. Responsibilities include environmental testing, instrument setup, data capture, and test report generation.
Qualifications
- Associate of Applied Science degree in Electronics or Electrical Technology or equivalent training.
- Three or more years of hands on electronics testing or technician work.
- Demonstrated hand soldering and rework on PCBs (SMT and through-hole).
- Experience building/modifying cable and wire harness assemblies with crimping and connector termination.
- Ability to read schematics, assembly drawings, BOMs, and test procedures.
- Experience with oscilloscopes, DMMs, power supplies, and function generators.
- Strong documentation skills to record setups, observations, and results clearly.
- Excellent attention to detail, discipline in record keeping, and methodical test sequences.
- MS Word, Excel, and Outlook proficiency; ability to learn test automation/data logging software.
- Ability to lift up to 40 pounds and work safely in lab environments.
Responsibilities
- Set up and operate environmental test chambers for temperature, humidity, altitude, and thermal shock testing of new products.
- Support accelerated life testing including fixture setup and test execution.
- Assist with environmental/electrical qualification testing to RTCA DO-160G.
- Write, redline, and maintain test plans and procedures; propose improvements.
- Record data logs, photos, and test results; create HALT summaries for review.
- Identify anomalies, assist with root-cause analysis, and retest after actions.
- Assemble prototypes per drawings and BOMs under engineering direction.
- Perform hand soldering, rework, and PCB mods including surface mount and through-hole parts.
- Fabricate cable/harness assemblies; termination, shielding, labeling, continuity checks.
- Assemble mechanical/electromechanical units and integrate subassemblies for testing.
- Operate and maintain test equipment and lab fixtures (oscilloscopes, DMMs, PS, FG, DAQ).
- Maintain lab calibration, cleanliness, ESD controls, and readiness of build area.
- Support transition to manufacturing by feedback on assembly/test procedures.
- Expedite parts, kitting, and assist with engineering experiments as needed.
Skills
Education
Tools
Job description
Heads Up Technologies is seeking an Electronics Technician to support new product development and design engineering through hands on testing, qualification support, and prototype build activities. Working under the direction of the engineering team, this role helps move products from concept through manufacturing release while collaborating closely with electrical, mechanical, software, and FPGA engineers.
Work Days and Hours: Monday through Friday, 8:00 AM to 5:00 PM, with flexibility to set the schedule.
Location: Onsite in Addison, Texas.
Position Type: Full time.
Primary Focus: New product development and design engineering support.
Work Eligibility: Must possess unrestricted authorization to work in the United States without employer sponsorship.
What You'll Do
- Set up, instrument, and operate environmental test chambers for temperature, humidity, altitude, and thermal shock testing of new products.
- Support and execute highly accelerated life testing, including fixture setup, thermal and vibration profile execution, powered functional monitoring, and capture of failure signatures.
- Support environmental and electrical qualification testing to RTCA DO-160G, including temperature and altitude, temperature variation, humidity, vibration, shock and crash safety, power input, and related sections, both in house and at outside test laboratories.
- Write, redline, and maintain test plans, test procedures, and test setup documentation, and recommend improvements when a procedure does not match the hardware or intent of the test.
- Record test results accurately and completely, including data logs, photographs, instrument screenshots, and pass or fail observations, and produce clear test reports and HALT summaries for engineering review.
- Identify, document, and elevate anomalies and failures observed during testing; support engineers with troubleshooting and root cause analysis; and retest after corrective action.
- Assemble prototype and engineering development units according to drawings, wiring diagrams, bills of material, and direction from engineering.
- Perform hand soldering, component level rework, and printed circuit board modifications, including surface mount and through hole parts, blue wire modifications, and component removal and replacement.
- Fabricate and modify cable and harness assemblies, including cutting, stripping, crimping, soldering, connector termination, shielding, labeling, and continuity verification.
- Build mechanical and electromechanical assemblies, install hardware, and integrate subassemblies into complete units for testing.
- Set up, operate, and maintain test equipment and laboratory fixtures, including oscilloscopes, digital multimeters, power supplies, function generators, and data acquisition systems.
- Maintain calibration status, cleanliness, ESD controls, and general readiness of the test laboratory and prototype build area.
- Support the transition of new products to manufacturing by providing feedback on assembly, testability, and workmanship and helping validate production test procedures and fixtures.
- Perform other tasks as needed to support new product development, including expediting parts, kitting builds, and assisting with engineering experiments and demonstrations.
- Associate of Applied Science degree in Electronics or Electrical Technology, completion of a military electronics technical school, or equivalent training.
- Three or more years of hands on experience in electronics testing, electronics assembly, or a comparable technician role.
- Demonstrated hand soldering and rework skills on printed circuit boards, including surface mount and through hole components.
- Experience building and modifying cable and wire harness assemblies, including crimping, connector termination, and continuity verification.
- Ability to read and work from schematics, assembly drawings, wiring diagrams, bills of material, and written test procedures.
- Experience with common electronic test equipment, including oscilloscopes, digital multimeters, power supplies, and function generators.
- Strong written documentation skills with the ability to record test setups, observations, and results clearly enough for an engineer to reproduce them.
- Excellent attention to detail, disciplined record keeping, and a methodical approach to repetitive test sequences.
- Basic proficiency with Microsoft Word, Excel, and Outlook and the ability to learn test automation and data logging software.
- Ability to lift and move test articles, fixtures, and equipment weighing up to 40 pounds and work safely in a laboratory environment with chambers, shakers, and powered test setups.
- Experience in aerospace, avionics, defense, or another regulated manufacturing environment.
- Hands on experience with environmental chambers, HALT or HASS systems, or vibration and shock test equipment.
- Familiarity with RTCA DO-160G or similar environmental and electrical qualification standards.
- IPC J-STD-001, IPC-A-610, and/or IPC/WHMA-A-620 certification.
- Experience supporting new product development or engineering prototype builds rather than production only assembly.
- Familiarity with ESD control practices and workmanship standards.
- Experience with data acquisition and test automation tools such as LabVIEW or Python scripting.
- Experience working within a PLM, ERP, or MRP system and documenting work against work orders and revision controlled drawings.
No recruiting agencies, please. Benefit eligibility and coverage are based on employment status, plan documents, and company policy. Official plan documents govern all benefits.
At Heads Up Technologies, we’re redefining what’s possible in the air. Since our beginnings in a Dallas hangar in 1985, we’ve grown into a global leader in aviation technology driven by innovation, precision, and a relentless pursuit of better in-flight experiences. From pioneering digital audio and lighting systems to uniting with STG Aerospace and ALTO Aviation under one brand, we continue to lead the way in cabin systems integration for business and commercial aircraft. Join us as we shape the future of aviation where lighting, entertainment, safety, and audio come together to elevate every journey.
We are a team of engineers, innovators, creators, and problem solvers who are passionate about building smarter solutions for the aviation industry.
Through the combined strengths of our specialized brands and capabilities, Heads Up Technologies brings together deep technical expertise, modern design thinking, and a collaborative approach to support customers across every stage of the product lifecycle.
Integrity
We act with honesty, accountability, and respect in everything we do.
Teamwork
We collaborate across teams and disciplines to achieve the best outcomes.
Excellence
We are committed to delivering high-quality work and continuously improving.
Expertise
We leverage our knowledge and experience to solve complex challenges
To elevate the aviation experience by delivering intelligent, integrated solutions powered by exceptional people.
Joining Heads Up Technologies means being part of a team that is shaping the future of aviation.
We offer an environment where employees are empowered to contribute, grow their careers, and make a direct impact on innovative products used across the globe. Whether you are developing technology or supporting business operations, your work here matters.
At Heads Up Technologies, we are committed to supporting the health, well being, and financial security of our employees and their families. Eligible employees have access to a competitive benefits package designed to support life at work and beyond.
Benefits may include:
- Medical plan options through Blue Cross Blue Shield (Company Paid)
- Dental and vision coverage
- Health Savings Account option with company contribution, if eligible
- Company paid Basic Life and AD&D insurance
- Company paid Long Term Disability coverage
- Voluntary Short Term Disability, Accident, and Critical Illness insurance
- Employee Assistance and Wellness Support resources
- Virtual care access
- Benefit Resource Center support
- Paid time off and paid holidays
Benefit eligibility and coverage are based on employment status, plan documents, and company policy. Official plan documents govern all benefits.
'/%3e%3cpath%20d='M101.744%2012.4726L102.894%2016.1947L99.0021%2013.2201L101.744%2012.4726ZM105.3%208.40937H100.488L99.0026%203.59473L97.5116%208.41047L92.7%208.40385L96.5965%2011.3834L95.1055%2016.1942L99.0021%2013.2196L101.408%2011.3834L105.3%208.40992V8.40937Z'%20fill='white'/%3e%3cdefs%3e%3clinearGradient%20id='paint0_linear_5593_1381'%20x1='90'%20y1='9.44471'%20x2='99'%20y2='9.44471'%20gradientUnits='userSpaceOnUse'%3e%3cstop%20stop-color='%2300AD70'/%3e%3cstop%20offset='0.998594'%20stop-color='%2300B67A'/%3e%3cstop%20offset='1'%20stop-color='%23DCDCE6'/%3e%3c/linearGradient%3e%3c/defs%3e%3c/svg%3e){kind=small}
