Electronics Engineer.

U.S. Army Aviation and Missile Command; Chambersburg (Franklin County); On-site; USD 90,000 - 120,000; Full time

Job summary

U.S. Army Aviation and Missile Command in Chambersburg, PA seeks an Electronics Engineer to review maintenance operations, support engineering requests, and optimize depot efficiency.

You will design changes for automated test equipment (ATE) used in Patriot and Hawk defense systems. Candidates must meet a bachelor's in engineering with ABET accreditation or equivalent combination, and possess specialized experience.

Qualifications

• Bachelor's degree in engineering with ABET accreditation or equivalent.
• Specialized engineering experience including electronics and ATE.
• Ability to obtain and maintain a SECRET-level clearance.

Responsibilities

• Review maintenance operations and directives to optimize depot efficiency.
• Design changes for computerized, automated test equipment (ATE) such as Patriot and Hawk systems.
• Verify compliance with engineering practices, design specifications, and safety requirements.
• Compare alternatives with supporting facts and figures to present recommended solutions to command groups and higher headquarters.

Skills

Electrical engineering

Systems engineering

Quality management

Design and development eng.

Education

ABET-accredited engineering degree

Licensure / FE exam beneficial

Job description

• Review of maintenance operations, engineering support requests, and Command directives to optimize Depot operating efficiency.
• Design change for computerized, automated test equipment (ATE) like the PATRIOT and HAWK systems.
• Verify compliance with accepted engineering practices, design specifications, and safety requirements.
• Compare engineering alternatives with supporting facts and figures to present recommended solutions to command groups and higher headquarters.

Duties

• Review of maintenance operations, engineering support requests, and Command directives to optimize Depot operating efficiency.
• Design change for computerized, automated test equipment (ATE) like the PATRIOT and HAWK systems.
• Verify compliance with accepted engineering practices, design specifications, and safety requirements.
• Compare engineering alternatives with supporting facts and figures to present recommended solutions to command groups and higher headquarters.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed Tier 3 SECRET background investigation.
• This position requires the completion of a pre-employment Physical Examination and an annual examination thereafter to ensure the continued, required level of physical health and ability or fitness to perform the duties of the position.
• This position has a requirement to lift up to 25 lbs. in the regular performance of duties.
• Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 11. While probationary the incumbent can be terminated with limited appeal rights.

Qualifications

Who May Apply:

• Current Department of Army Civilian Employees
• Interagency Career Transition Assistance Plan
• Land Management Workforce Flexibility Act
• Military Spouses, under Executive Order (E.O.) 13473
• Non-Department of Defense (DoD) Transfer
• Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
• Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
• Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
• Priority Placement Program, DoD Retained Grade Preference Eligible
• Reinstatement
• Veterans Employment Opportunity Act (VEOA) of 1998

In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is

Basic Requirement For Electronics Engineer:

• Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

• Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
• Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
• Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
• Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
• Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In Addition To Meeting The Basic Requirement Above, To Qualify For This Position You Must Also Meet The Qualification Requirements Listed Below:

Specialized Experience: One year of specialized experience which includes 1) independently conduct comprehensive engineering investigations to evaluate the designs, operations, and efficiencies of electrical and electronic processes. 2) Serve as the primary technical coordinator and manager for special interest projects, managing liaison between depot elements, command groups, and private industry partners to identify and integrate state-of-the-art technological advancements. 3) Design, develop, and inspect complex electronic systems and computerized Automated Test Equipment (ATE)-including systems utilized for Patriot and Hawk missile defense technologies-while providing vital software engineering support during design transitions.. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service GS-11.

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

You will be evaluated on the basis of your level of competency in the following areas:

• Design and Development Engineering
• Electronics Engineering
• Quality Management
• Systems Engineering

Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

Education

FOREIGN EDUCATION:

If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit:

Additional information

• Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
• You will be required to provide proof of U.S. Citizenship.
• This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
• Direct deposit of pay is required.
• Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
• If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the
• This is a(n) 16 Career Program position aligned under the Engineers and Scientists (Non Construction) Career Management Directorate.
• Salary includes applicable locality pay or Local Market Supplement.
• Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
• Further certification from this announcement may take place up to 90 days beyond the closing date of this announcement.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding.

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.