ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC

Cenith Innovations LLC; Helena (MT); Presencial; USD 56.000 - 65.000; Jornada completa

Descripción de la vacante

Montana Army National Guard in Helena, MT, is seeking an Electronic Measurement Equipment Mechanic (WG 11) under Title 32 National Guard Exc- Service. The position is full-time, with occasional travel and a Secret clearance requirement.

Work location is Helena, MT, with duties to calibrate, repair, and test precision measurement equipment. The role involves interpreting manuals, testing with oscilloscopes, multimeters, and related tools, and maintaining TIMMS/TAMMS records.

Formación

• Must have experience with calibration and repair of TMDE (test, measurement, and diagnostic equipment).
• Experience using precision measurement instruments and standards.
• Ability to interpret technical bulletins, manuals and schematics.

Responsabilidades

• Calibrates and repairs TMDE within scope of authority.
• Performs testing and alignment of precision measurement equipment.
• Maintains calibration records and TIMMS/TAMMS data.
• Diagnoses faults and replaces defective parts.
• Ensures safety and security procedures are followed.

Conocimientos

Electronic principles

Troubleshooting

Herramientas

Oscilloscopes

Multimeters

Signal generators

Radiation monitors

Descripción del empleo

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.

(A copy of the Position Description can be obtained from HRO upon request.)

Selecting Official: CW4 Adams

SUMMARY

This National Guard position is for an ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC, Position Description Number D1201000, and is part of the Montana Army National Guard, G4 MTMA.

OVERVIEW

Accepting applications.

Open 11/02/2026 to 11/17/2026.

Location: Helena, MT.

Salary: $40.52 - $47.28 per hour.

Pay scale & grade: WG 11.

Promotion potential: None.

Work schedule: Full-time.

Travel Required: Occasional travel - You may be expected to travel for this position.

Appointment type: Permanent.

Occupations and job series:

• 2602 Electronic Measurement Equipment Mechanic

Supervisory status: No.

Federal service type: This job is in the Excepted Service.

Represented by a union: No.

Drug test: No.

Security clearance: Secret.

Position sensitivity and risk: Noncritical-Sensitive (NCS)/Moderate Risk.

Background check type:

• Suitability/Fitness

Financial disclosure required: No.

Announcement number: MT-13105413-AR-27-022.

Control number: 891201600.

This job is open to:

• Internal to an agency.
• National Guard and reserves.

Clarification from the agency:

This position is open to the following: Area I - Permanent (Tenure 1/2) T32 technicians of the MT Army National Guard (MTARNG), Area II - Indefinite (Tenure 3) MTARNG T32 technicians & MTARNG T5 permanent (Tenure 1/2) or term (Tenure 3) employees that are military members of the MTARNG, & Area III - military members of the MTARNG or T5 temporary (Tenure 0) employees that are military members of the MTARNG.

DUTIES

Calibrates and repairs TMDE within support capability and authority including various levels of calibration as designated in technical bulletins, manuals, etc. Performs functional electronic, physical, and radioactive testing involving interpretation and analysis of measurement data, in accordance with cyclic inspection requirements. Aligns, troubleshoots, tests, inspects, repairs, modifies, calibrates and certifies precision measurement equipment such as multimeters, microwave equipment, oscilloscopes, temperature analyzers, mercurial barometers, gage blocks and micrometer caliper dimensional equipment, digital voltmeters, signal generators, torque wrenches, pressure gauges, torque testers, weight scales, electronic counters, radiation monitors, radix calibrators, and radiation dosimeters. Analyzes and isolates component malfunctions; calculates and determines tolerances; and performs tests and calibrations in accordance with instructions, which are often vague and incomplete, and may require the preparation of diagrams and instructions to facilitate the calibration action. Sets up system test sets and various types of test equipment such as frequency meters, standing wave ratio meters, radio frequency (RF) power meters, function/ arbitrary waveform generator, distortion analyzers, time frequency work stations, oscillators, voltmeters, electronic counters, oscilloscopes, attenuators, decade resistors and capacitors, signal generators, stroboscope, tachometers, pneumatic and hydraulic pressure standards and other physical and electronic tests. Diagnoses equipment, makes repairs, and replaces defective parts/components such as integrated circuits, printed circuit boards, electronic condition coils, radiation detector boards/circuits, crystals, transistors, tubes, transformers, condensers, diodes, relays potentiometers, and related components. Following repair, tests by applying signals in known amplitude and wave shape into oscilloscopes to observe wave pattern. Isolates faults by taking measurements and comparisons in voltage,amperage, ohms, henries, power factor, watts, temperature, humidity, microns, foot-pounds, decibels, sensitivity, noise, stability, Voltage Standard Wave Ratio (VSWR), impedance, phase, absolute pressure, time intervals, displacement, flow rate, etc., to determine performance of equipment. If signal is distorted, traces it through electronic stages to locate malfunctioning part. Checks sweep rate by feeding known signal to an oscilloscope and observing wave pattern to correct shape and size. Operates equipment to complete range checking for proper operation of positioning controls. Adjusts with trimmer potentiometers; and if calibration is still not possible, adds or removes sufficient resistance to permit balancing of circuit. As needed, contacts the using organization to obtain information concerning the nature of the malfunction. Uses equipment schematics to analyze circuits by preparing block diagram showing major components such as amplifiers, filters, oscillators and indicators. Determines purpose in operation characteristics of each major section. Refers to technical manuals and manufactures specifications to obtain information on operation characteristics of circuit components such as integrated circuits, microprocessors, decoders, latching networks, notch filters, logics, controllers, programmable gain amplifiers, digital displays, transistors, tubes, transformers, coils, relays, motors, and similar devices. Disassembles, cleans and inspects parts such as printed circuit boards, resistors, capacitors, integrated circuits, relays, chambers, cables, and wiring for evidence or wear or malfunction. Repairs and/or replaces parts as required. Uses special test devices and radioactive samples or other calibrated sources. Tests equipment for sensitivity and correct operation. Observes necessary precautions as stipulated in operational repair manuals. Makes radiation calculations/readings at various distances from the standard ensuring radiation equipment is operating in specified parameters. Performs contamination/radiation surveys on radiation equipment to control/eliminate radiation leakage/contamination. Completes necessary Army Maintenance Management System (TAMMS), calibration, radiation reports and other records and forms on work completed. Ensures maximum number of weapons systems are operationally ready. Uses TMDE Integrated Maintenance Management Systems (TIMMS) for all supported equipment to track, turn-in, repair, calibrate, and return to the end user in a timely fashion to prevent work stoppages. Follows appropriate safety procedures, with special care being exercised while calibrating high voltage, radio frequency, radioactive sources and high-pressure instruments and gages. Performs other duties as assigned.

REQUIREMENTS

Conditions of employment:

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. This is an excepted service position that requires membership in the employing state's National Guard. Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• Appointments in the Title 32 MTNG technician program may terminate/suspend your military incentives; please see your MTNG Retention Office/Military Personnel Incentive Program Manager for details.
• Must be able to obtain and maintain the appropriate security clearance of the position.
• External applicants must be able to start within 6 months of selection.
• This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
• Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
• May occasionally be required to work other than normal duty hours; overtime may be required.
• The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by the legal and regulatory requirements and your organization.

QUALIFICATIONS

Military Grades: Enlisted E4 - E9; Warrant WO1 - CW3

GENERAL EXPERIENCE REQUIREMENTS: Must have experience or training which demonstrates a working knowledge of electronic principles involved in the generation and measurement of such elements as voltage, current, impedance, capacitance, frequency, and inductance. Experience in the use of various precision measurement instruments and standards.

SPECIALIZED EXPERIENCE REQUIREMENTS: Must have experience or training with basic application of operating principles such as the production and utilization of oscillations over a broad range of frequencies; signal and waveform behavior, distortion, and amplification; pulse, trigger, and synchronization techniques; digital/analog processing and data conversion techniques; and a variety of display and indication methods. Experience in tracing signals and voltage paths, and skilled in the analysis of waveform characteristics such as timing, duration, frequency, and phasing. Originates test set‑ups to isolate malfunctions and check performance characteristics of special or unique test panels or mockups. Experience in interpreting and applying a variety of technical electronic information such as schematic symbols, mathematical expressions and formulas, calibration procedures, and other reference materials. Experience in applying established techniques and methods of repair, testing, alignment, and calibration of equipment, which serves as test equipment or precision measurement standards. Experience in utilizing electronic circuits to measure electronic or electrical quantities to determine the performance characteristics and accuracy of other instruments and equipment.

MUST address your experiences in detail on your resume as they relate to these general and specialized experience requirements, to be considered for this position.

EDUCATION

This job does not have an education qualification requirement.

ADDITIONAL INFORMATION

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

BENEFITS

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

HOW YOU WILL BE EVALUATED

You will be evaluated for this job based on how well you meet the qualifications above. Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

AGENCY CONTACT INFORMATION

Vanessa Toquero

Email: [e-mail]

Address: MT J4, 1956 Mt Majo Street, Fort Harrison, MT 59636-4789, US

VISIT OUR CAREERS PAGE

Learn more about what it's like to work at Army National Guard Units, what the agency does, and about the types of careers this agency offers.

SUMMARY

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.

This National Guard position is for an ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC, Position Description Number D1201000, and is part of the Montana Army National Guard, G4 MTMA.