Electro Mechanic

TOPPAN Packaging Americas; Chillicothe (MO); On-site; USD 56,118 - 68,016; Full time

Benefits offered by this job

Medical, dental, and vision coverage

401(k) retirement plan with company 
%

Well-being tools and EAP

Paid time off and holidays

Company-paid and voluntary insurance (

Tuition reimbursement

Job summary

TOPPAN Packaging Americas in Chillicothe, MO is seeking an Electro Mechanic to install, calibrate, and repair electronic instrumentation, controls, and electrical/mechanical devices in an industrial plant.

The role reports to the Plant Engineer and operates on the Night Shift (7:00 pm – 7:00 am) with a night shift premium of $2.00 and a pay rate of $26.98–$32.70 per hour, depending on experience. This position requires hands-on technical skill and attention to detail.

Qualifications

• Associate's degree or equivalent plus 6 months of related work experience, or 3 years in electronic/electrical/mechanical tech.
• Fork-truck operator license preferred.
• Experience with Fanuc or similar robots.
• Strong reading, comprehension, writing, and presentation of technical information.
• Solid mathematical skills: probability, statistics, geometry, trigonometry, fractions, percentages, ratios.
• Ability to interpret technical instructions in multiple formats.
• Capacity to use mechanical lifts.
• Must wear PPE and work in demanding conditions.

Responsibilities

• Comply with plant safety requirements and participate in safety program.
• Diagnose PLC control issues by monitoring PLC programs; install, calibrate, troubleshoot, maintain, and repair major electronic, electrical, and mechanical systems and peripheral devices.
• Read complex schematics, wiring diagrams, and shop drawings for installation, troubleshooting, and repair of major systems and subsystems.
• Troubleshoot and install safety and motor starter control circuits.
• Troubleshoot, install, and calibrate instruments including ultrasonic level transmitters, flow meters, pressure transmitters, temperature transmitters, and differential pressure transmitters.
• Participate in GPS activities, including R-3s, zero-failure analyses, incident follow-up, and root-cause analysis.
• Utilize test equipment to identify problems and maintain equipment to performance standards.
• Connect, disconnect, and tag out equipment and circuits for testing or repair ensuring safety for personnel and equipment.
• Pull and terminate cable for instrumentation installation and repair.
• Install electrical conduit and wiring for electrical circuits in compliance with national electrical code.
• Perform soldering on electronic components and mechanical repairs as required.
• Perform preventive maintenance by inspecting electronic, electrical, and mechanical systems, equipment, and components.
• Maintain neat and orderly shop and storage areas.
• Perform other duties as assigned to support the organization and occasionally work on special projects.
• Be available for work on short notice if called in.

Skills

Reading & writing skills

Math skills

Interpret technical instructions

Physical stamina

PPE compliance

Education

2-year degree or equivalent

Tools

Fanuc robots

Forklift license

Job description

Job Summary

This position reports to Plant Engineer in Chillicothe, MO. The Electro Mechanic will install, configure, troubleshoot, calibrate, repair, or replace electronic instrumentation, controls, and electrical and mechanical devices typical in an industrial plant environment. The role requires hands‑on technical skill and attention to detail.

Location & Compensation

Location: Chillicothe, MO
Position: Electro Mechanic
Hours: Night Shift 7:00 pm – 7:00 am (Night Shift Premium $2.00)
Rate: $26.98 – $32.70 per hour, based on experience.

Key Responsibilities

• Comply with all plant safety requirements and participate fully in the plant safety program.
• Diagnose PLC (Programmable Logic Controller) control level issues by monitoring PLC programs; install, calibrate, troubleshoot, maintain, and repair major electronic, electrical, and mechanical systems and peripheral devices per manufacturer specification.
• Read complex schematics, wiring diagrams, and shop drawings for installation, troubleshooting, and repair of major systems and subsystems.
• Troubleshoot and install safety and motor starter control circuits.
• Troubleshoot, install, and calibrate various instruments, including ultrasonic level transmitters, flow meters, pressure transmitters, temperature transmitters, and differential pressure transmitters.
• Participate in GPS activities, including R‑3s, zero‑failure analyses, incident follow‑up, and root‑cause analysis.
• Utilize test equipment (analog/digital multi‑meters, etc.) to identify problems and maintain equipment to performance standards.
• Connect, disconnect, and tag out equipment and circuits for testing or repair ensuring safety for personnel and equipment.
• Pull and terminate cable for instrumentation installation and repair.
• Install electrical conduit and wiring for electrical circuits in compliance with national electrical code.
• Perform soldering on electronic components and mechanical repairs as required.
• Perform preventive maintenance by inspecting electronic, electrical, and mechanical systems, equipment, and components.
• Maintain neat and orderly shop and storage areas.
• Perform other duties as assigned to support the organization and occasionally work on special projects.
• Be available for work on short notice if called in.

Qualifications

• Associate’s degree or equivalent from a two‑year college or technical school plus 6 months of related work experience, or 3 years of experience in electronic, electrical, and mechanical technology.
• Fork‑truck operator license preferred.
• Experience with Fanuc or similar robots is a plus.
• Strong reading, comprehension, writing, and presentation skills for technical information.
• Solid mathematical skills: probability, statistics, geometry, trigonometry, fractions, percentages, ratios, and proportions.
• Ability to interpret technical instructions in multiple formats and apply concepts to practical situations.
• Capacity to use mechanical lifts.
• Willow to kneel, bend, twist, reach, climb stairs and ladders, and lift over 50 lb.
• Ability to wear required PPE, including hearing protection, safety glasses, hair/face net (if applicable), and steel‑toe shoes.
• Ability to work in conditions that may include heat, humidity, and production noise.

Benefits

• Medical, dental, and vision coverage for employee and dependents, including FSA and HSA options.
• 401(k) retirement plan with company match.
• Well‑being tools and resources, including an Employee Assistance Program.
• Paid time off and holidays.
• Variety of company‑paid and voluntary employee‑paid insurance plans (life, personal accident, disability).
• Tuition reimbursement.

Equal Opportunity Employer. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, national origin, ancestry, ethnicity, sex, gender identity or expression, sexual orientation, age, disability, genetic information, marital status, veteran or military status, citizenship status, or any other characteristic protected by applicable federal, state, or local laws.

We are committed to providing a workplace where everyone feels respected, valued, and able to contribute to their fullest potential. We also provide reasonable accommodations to individuals with disabilities throughout the application and employment processes. If you require assistance or accommodation due to a disability, please contact us.