Electrician B - 3rd Shift

GKN Aerospace

Garden Grove (CA)

On-site

USD 55,000 - 90,000

Full time

45 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

GKN Aerospace in Garden Grove, CA seeks an Electrical Maintenance Technician to provide safe, reliable first-response and planned maintenance for facility infrastructure and industrial equipment. You will troubleshoot, repair, install, and improve systems from 5VDC to 480VAC, following NEC rules, with documented closeout and proper escalation within defined boundaries.

Shift: 3rd shift, 9:45pm PST – 6:15am PST.

Qualifications

  • High school diploma or GED required.
  • 1–3 years electrician experience, per labor agreement.
  • Knowledge of industrial electrical systems including 5VDC–480VAC.
  • Ability to read electrical schematics and diagrams.
  • Ability to use a multimeter and diagnostic tools.
  • Ability to troubleshoot and elevate issues within boundaries.
  • Ability to work independently and in maintenance teams.
  • Must be able to lift up to 50 lbs and work at heights.

Responsibilities

  • Electrical troubleshooting and recovery for facility and industrial machinery (5VDC–480VAC).
  • Read and apply ladder diagrams, schematics, control wiring diagrams, and equipment drawings to diagnose faults.
  • Perform preventive and corrective maintenance, install and repair lighting, transformers, wiring, and motor controls.
  • Install, modify, and upgrade electrical systems and lighting, including conduit sizing and terminations.
  • Maintain records in the site maintenance management system and coordinate with stakeholders.

Skills

Electrical troubleshooting
Read ladder diagrams
Team collaboration
Independent work
Manual dexterity

Education

High school diploma or GED

Tools

Multimeter usage
Electrical testing tools

Job description

Fantastic challenges. Amazing opportunities.

GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we’re inspired by the opportunities to innovate and break boundaries. We’re proud to play a part in protecting the world’s democracies. And we’re committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 32 manufacturing sites in 12 countries we serve over 90% of the world’s aircraft and engine manufacturers and achieved sales of £3.6bn in 2025. There are no limits to where you can take your career.

Job Summary

Provide safe, reliable first-response and planned electrical maintenance support for facility infrastructure and industrial manufacturing equipment across the Garden Grove site. Maintain, troubleshoot, repair, install, and improve systems from 5VDC to 480VAC through disciplined diagnostics, preventive maintenance, NEC-compliant work, documented closeout, shift handoff, and timely escalation within established qualification and classification boundaries.

3rd Shift: 9:45pm PST - 6:15am PST

Job Responsibilities
1. Electrical Troubleshooting and Equipment Recovery
  • Execute safe first response, troubleshooting, repair, restoration, and escalation for facility and industrial machinery electrical systems from 5VDC to 480VAC.
  • Read and apply ladder diagrams, electrical schematics, control-wiring diagrams, equipment drawings, technical manuals, equipment history, and approved documentation to diagnose faults and restore equipment.
  • Use multimeters and other approved diagnostic tools to identify faults, verify electrical conditions, and support safe equipment restoration.
2. Preventive, Corrective, and Installation Work
  • Perform assigned preventive maintenance, inspections, and corrective maintenance in accordance with approved procedures, specifications, safety requirements, and role boundaries.
  • Install, maintain, troubleshoot, and repair lighting, receptacles, transformers, circuit breakers, wiring, power distribution, motors, relays, contactors, starters, heating elements, push buttons, indicator lights, and basic low-voltage controls.
  • Bend and install EMT, IMC, and rigid conduit; pull and terminate wire; and properly size conduit, conductors, transformers, and circuit breakers in accordance with applicable NEC requirements.
  • Support installation, modification, commissioning, and upgrade of machinery and facility electrical systems, including lighting and LED conversion projects.
3. Work Control, Documentation, and Materials
  • Use the site maintenance management system as the record for assigned work, labor, parts, findings, failure information, follow-up actions, and clear closeout notes.
  • Identify required parts, materials, tools, and supplies; communicate shortages and critical needs through established maintenance, stores, inventory, and purchasing processes.
  • Provide clear technical information during shift handoffs and elevate recurring, complex, or out-of-scope conditions.
(cont...)
4. Production, Maintenance, and Shift Coordination
  • Coordinate with Production, Maintenance, engineering, supervision, and approved service providers regarding equipment status, safe shutdown and recovery, operating constraints, and return-to-service activities.
  • Assist maintenance mechanics with troubleshooting, equipment installation, repairs, and other maintenance activities requiring electrical support.
  • Participate in technical training, root-cause investigations, PM improvement, equipment installation, commissioning, startup, and knowledge transfer.
5. Safety, Compliance, and Coverage
  • Comply with LOTO/LOTOTO, electrical safety, arc-flash and shock-protection requirements, PPE, machine guarding, permits, fall protection, and other applicable site and regulatory requirements; stop and elevate unsafe work.
  • Perform work within established qualification and classification boundaries and elevate work requiring Electrician A, engineering, licensed-contractor, or supervisory authority.
  • Support manufacturing operations with approved overtime, call-in, or shift-overlap coverage when required.
Required Qualifications
  • High school diploma or GED equivalent.
  • One to three years of electrician experience, subject to applicable classification and labor-agreement requirements.
  • Working knowledge of industrial and facility electrical systems, including power and control wiring, conduit, lighting, transformers, circuit breakers, motors, motor controls, and basic low-voltage control circuits.
  • Working knowledge of electrical systems from 5VDC to 480VAC and applicable NEC requirements.
  • Ability to read electrical schematics, ladder diagrams, control-wiring diagrams, equipment drawings, and technical documentation.
  • Ability to safely and effectively use a multimeter and other appropriate electrical testing and diagnostic tools.
  • Ability to perform systematic electrical troubleshooting and root-cause analysis and to elevate work outside established boundaries.
  • Ability to work independently with minimal supervision and effectively as part of a maintenance team.
  • Must possess the hand tools necessary to perform assigned work efficiently and safely.
  • Ability to safely lift and maneuver up to 50 pounds and work on rooftops, ladders, elevated areas, and in industrial work areas for extended periods, with reasonable accommodation where applicable.
  • Knowledge of LOTO/LOTOTO, electrical safety, PPE, machine guarding, permits, and applicable site and regulatory requirements.
  • Ability to work the stated shift and approved overtime, call-in, or overlap coverage as required.
  • Must meet applicable U.S. Person, ITAR, export-control, site-security, work-performance, attendance, and qualification requirements.
Preferred Qualifications
  • Technical certificate, apprenticeship, associate degree, or equivalent formal training in electrical technology, industrial maintenance, controls, or a related discipline.
  • Experience supporting electrical maintenance in aerospace or another regulated manufacturing environment.
  • Experience with Maintenance Connection or a comparable computerized maintenance management system.
  • Experience supporting equipment installation, commissioning, preventive-maintenance improvement, and structured root-cause investigations.
  • Experience with variable-frequency drives, industrial controls, cleanroom or controlled-environment systems, and manufacturing-equipment electrical support.
  • Experience with Microsoft Office and digital maintenance documentation.

We’ll offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go?

A Great Place to work needs a Great Way of Working

Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles we’ve created a culture where everyone feels welcome to contribute. It’s a culture that won us ‘The Best Workplace Culture Award’. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.

We’re also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.

We arethe place where human dreams, plus humanendeavour, shape the future of aerospace innovation and technology.


Nearest Major Market: Orange County
Nearest Secondary Market: Los Angeles

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Manufacturing Engineer - 3rd Shift (Temp Contract)
Manufacturing Engineer - 3rd Shift (Temp Contract)

GKN Aerospace • Garden Grove (CA)

On-site
USD 59,000 - 74,000
Vacuum Chamber Technician B - 2nd Shift
Vacuum Chamber Technician B - 2nd Shift

GKN Aerospace company • Garden Grove (CA)

On-site
USD 38,000 - 64,000
Manufacturing Engineer 1st Shift (Temp Contract)
Manufacturing Engineer 1st Shift (Temp Contract)

GKN Aerospace • Garden Grove (CA)

On-site
USD 60,000 - 75,000
Manufacturing Engineer - 2nd Shift (Temp Contract)
Manufacturing Engineer - 2nd Shift (Temp Contract)

GKN Aerospace • Garden Grove (CA)

On-site
USD 60,000 - 75,000
2nd Shift Maintenance Technician
2nd Shift Maintenance Technician

GKN Aerospace company • Muncie (IN)

On-site
USD 42,000 - 62,000
Group Leader
Group Leader

GKN Aerospace • Garden Grove (CA)

On-site
USD 85,000 - 125,000
2nd Shift Maintenance Technician
2nd Shift Maintenance Technician

GKN Aerospace • Muncie (IN)

On-site
USD 30,000 - 39,000
Production Supervisor
Production Supervisor

GKN Aerospace • Garden Grove (CA)

On-site
USD 86,000 - 107,000
Maintenance Planner (Contract)
Maintenance Planner (Contract)

GKN Aerospace • Garden Grove (CA)

On-site
USD 84,000 - 105,000
HVAC Mechanic - 1st Shift
HVAC Mechanic - 1st Shift

GKN Aerospace • Garden Grove (CA)

On-site
USD 70,000 - 100,000