Electrician Advance IV | D- Shift

Shaw Industries Group

Calhoun (GA)

On-site

USD 34,000 - 55,000

Full time

11 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Shaw Industries Group is seeking an Electrician Advance IV for the D-Shift at the Calhoun, GA plant. The role involves installing and repairing electrical equipment, troubleshooting PLCs, drives, and inverters, and training technician-electricians II and III.

The position requires interpreting electrical and mechanical systems, performing preventive maintenance, and supporting safety and regulatory standards.

Qualifications

  • Ability to interpret electrical and mechanical conditions to identify failures and opportunities for improvement.
  • Perform preventive maintenance on plant equipment per schedules.
  • Experience with electrical control systems and PLCs; familiarity with drive systems.

Responsibilities

  • Receive project assignments from supervisor and respond to trouble calls.
  • Troubleshoot relay logic and control circuits; interpret schematics and documentation.
  • Design, program and troubleshoot simple PLC systems for projects.
  • Train technicians at other levels to perform tasks safely and effectively.
  • Maintain electrical operations for off-shift production; communicate issues to management.
  • Learn and use Ariba and EZ Entry/TPM systems for parts and work instructions.

Skills

Troubleshooting
Preventive maintenance
Electrical theory
Reading schematics
Training others
Safety compliance
Industrial electrical

Tools

DMMs
amp meters
megger meters
RSLogix
RSLinks
DOS/Windows
PID control
Ariba
EZ Entry/TPM
AC/DC drive programming
Ladders & relays

Job description

Electrician Advance IV | D- Shift### Electrician Advance IV | D- ShiftApply: Shaw Plant D7, 355 South Industrial Blvd, Calhoun, GA 30701 USA: Full time: Posted Today: R-149353**Job Title**Electrician Advance IV | D- Shift**Position Overview**## Job description:Install and repair electrical equipment. Must be knowledgeablein the principles and techniques commonly used in the electrical field, including programming, troubleshooting, PLC’s, inverters, and single loop controllers. Candidate must be able to provide training and guidance to technician-electrician II and III. Must be able to successfully perform all requirements of technician-electrician IV according to START program requirements.The candidate chosen for this position may be hired at an interim job title and interim pay rate if all training and testing requirements for the position have not been successfully completed prior to hire/placement. **Shift: D - 7 pm - 7 am** ## **Responsibilities:*** Successful completion/execution of START Technician-Electrician IV training program or have verifiable experience* Receive project assignment from supervisor and respond to trouble calls from other* departments* Troubleshoot relay logic* Draw and interpret schematics and compile documentation for complex projects* Projects must be completed in a safe and timely fashion* Interpret electrical and mechanical situations to determine process failure, needs, and* improvements.* Write simple PLC program applications* Design, program, and troubleshoot simple PLC systems* Be able to effectively train technicians at all other levels to perform task successfully and safely* Consistent effort to stay current with new technology, equipment, and regulations* Maintain electrical operations for off-shift production systems – may require giving* instructions via telephone conversations* Complete assignments in a timely fashion* Report to management any quality and safety problems and potential production problems that are encountered while performing the job* Perform all job duties in a safe manner without bodily injury to self or others* Perform all related job duties and other responsibilities assigned by supervisor or* department manager* Learn and use Ariba procurement system to order parts and supplies related to job needs* Learn and use EZ Entry/TPM system to set up and receive work instructions **Position Requirements/ Skills** * Must be able to interpret electrical and mechanical situations to determine process failure, needs, and improvements* Must be able to perform preventive maintenance on equipment* Must be able to use test equipment including but not limited to DMM’s, amp meters, and megger meters* Must be able to design, install, repair, replace and maintain motors, drives, controls,* starters, lights, power, communication, PLC, and other related systems* Know the practices, methods, tools, materials and equipment of the electrician’s trade* Know the hazards and safety precautions of all procedures* Know to diagnose and remedy maintenance problems* Knowledge of AC/DC drive programming* Knowledge of the National Electric Code* Knowledgeable in the use of DOS, Windows, RSLogix, RSLinks, and other supplied software* Knowledgeable of PID control* Knowledgeable of TMS system ## **Non-Essential Requirements:*** Work cooperatively with other electrician/maintenance employees* Must be able to work 8-12 hour shifts and overtime as necessary up to 7 days including the ability to give work instructions via telephone* Must have satisfactory work history as defined in personnel file* Must possess good communication skills, both written and oral to management and other electricians* Must attend shift first-day-back safety meetings* Must meet all requirements to drive/operate company vehicle on company business* Must comply with all company policies* Must attend all training/development as required by facility management* Must practice good housekeeping skills* Must abide by Company attendance policy* Must support PRIDE goals ## **Physical Requirements:*** Must be able to walk/stand for extended periods of time* Must be able to lift, push, pull and carry loads of up to 50 pounds without assistance* Must be able to bend, stoop, squat, grasp and reach frequently* Must be able to work with hands/arms extended overhead* Must be able to climb stairs and ladders repeatedly* Must be able to work in temperatures in excess of 100 degrees for limited periods of time* Must be able to operate hand and power tools and equipment* Must be able to use/operate hand and power tools in areas of limited space* Must be able to work in elevated environment (ladders, lifts, baskets, etc.) for extended periods of time* Must be able to work in industrial environment with elevated noise levels, dust, dirt,* humidity and temperature variations* Must be able to work outdoors as needed* Must be able to work on facility roofs as necessary* Must be able to work near moving electrical machine parts and near live electrical systems* Must successfully pass vision screen for color perception* Must participate in pre-shift stretching exercises#SHAWIND**Work Shift**12 Hr rotating shift, Hrs fall to in punch day, Act Calendar, shift starts PM, days change onlyShaw Industries is an equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electrician Advanced (IV)
Electrician Advanced (IV)

Shaw Industries Group • Georgia

On-site
USD 60,000 - 85,000
Electrician Senior Intermediate (III) - Night Shift
Electrician Senior Intermediate (III) - Night Shift

Shaw Industries Group, Inc. • Georgia

On-site
USD 39,000 - 52,000
Electrician Advance IV | Day Shift |
Electrician Advance IV | Day Shift |

Shaw Industries Ltd • Calhoun (GA)

On-site
USD 70,000 - 90,000
Electrician Advanced IV | Night Shift|
Electrician Advanced IV | Night Shift|

Shaw Industries • Calhoun (GA)

On-site
USD 85,000 - 110,000
Medical insurance
Dental insurance
Vision insurance
+9
Electrician Advanced (IV) - Night Shift
Electrician Advanced (IV) - Night Shift

Shaw Industries Group, Inc. • Dalton (GA)

On-site
USD 70,000 - 90,000
Electrician Advance IV | D-Shift (12-hr)
Electrician Advance IV | D-Shift (12-hr)

Shawfloorscareers • Calhoun (GA)

On-site
USD 39,000 - 58,000
Maintenance Tech Lead
Maintenance Tech Lead

Shaw Industries • Chickamauga (GA)

On-site
USD 48,000 - 69,000
Maintenance Tech B | C- Shift
Maintenance Tech B | C- Shift

Shaw Industries Group • Calhoun (GA)

On-site
USD 52,000 - 76,000
Maintenance Tech Lead
Maintenance Tech Lead

Shaw Industries Ltd • Chickamauga (GA)

On-site
USD 85,000 - 110,000
Senior Electrician IV – D-Shift (7 PM–7 AM)
Senior Electrician IV – D-Shift (7 PM–7 AM)

Shaw Industries Group • Calhoun (GA)

On-site
USD 34,000 - 55,000