Electrical Engineering Technician, Connected Warfare

Anduril Industries, Inc.; Costa Mesa (CA); On-site; USD 58,000 - 73,000; Full time

Benefits offered by this job

Equity grants

Job summary

Anduril Industries, Inc. is seeking an experienced electronics assembler to build, test, and rework complex PCB assemblies and cable/wire harnesses in a secure lab environment in Costa Mesa, CA. You will read schematics, implement IPC-standard soldering, and document results for engineering teams.

The role requires 5+ years in R&D or production electronics, experience with SMT/through-hole soldering, and the ability to obtain/maintain a U.S. Top Secret clearance.

Qualifications

• 5+ years of hands-on electronics assembly, testing and rework in R&D or production.
• Ability to read and interpret complex electrical schematics, assembly drawings, wiring diagrams, BOMs and datasheets.
• Proficiency in fine-pitch SMT and through-hole soldering to IPC-J-STD-001 or equivalent standards.
• Experience building and modifying complex cable/wire harness assemblies (crimping, soldering, routing).
• Proficiency diagnosing electronic failures to component level with standard test equipment.

Responsibilities

• Build, assemble, and modify complex cable and wire harness assemblies following schematics and drawings.
• Perform precision PCB rework and assembly (SMT and through-hole) under microscope.
• Execute test plans using oscilloscopes, power supplies, multimeters, signal generators, etc.
• Diagnose failures to component level and perform repairs.
• Document test data, rework actions, and failure modes for engineering analysis.
• Maintain lab cleanliness and EHS/Quality compliance.
• Ensure lab equipment calibration and stock material readiness.

Skills

Electronics assembly

Schematic reading

Fine-pitch SMT soldering

Through-hole soldering

Troubleshooting

Communication

Self-management

Clearance readiness

Education

Associate degree in Electrical/Electronics

Tools

Altium

Siemens NX

OrCAD

Teamcenter

Job description

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting‑edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.

ABOUT THE TEAM

Anduril Expeditionary Systems (AES) is the team at Anduril dedicated to the development and fielding of next‑generation hardware — from man‑portable systems to autonomous launchers — that modernize the command‑and‑control capabilities of U.S. and Allied forces. Delivering these systems at speed and scale demands program leaders who can drive complex, cross‑functional execution from concept through production, hold accountability across engineering, supply chain, and manufacturing, and engage customers and stakeholders with credibility and clarity. If you thrive at the intersection of technology and operational excellence, join us. Your work will directly shape the balance of defense capabilities on a global scale.

WHAT YOU'LL DO

• Reports directly to the Electrical Engineering Lab Supervisor
• Build, assemble, and modify complex cable and wire harness assemblies, including crimping contacts, soldering various connector types, and routing wires according to schematics and engineering drawings.
• Perform precision PCB rework and assembly, including surface‑mount (SMT) and through‑hole soldering, component replacement, and jumper wire installation under a microscope. This also includes conformal coating and staking operations.
• Execute comprehensive test plans: set up, configure, and operate test equipment (oscilloscopes, power supplies, multimeters, signal generators, etc.) to verify performance of PCBs and integrated power systems.
• Troubleshoot and diagnose failures in electronic assemblies (PCBs and harnesses) and power systems down to the component/assembly level using schematics, layouts, and wiring diagrams, and then executing necessary repairs.
• Accurately document test data, rework actions, assembly details, and failure modes to support engineering analysis and continuous improvement.
• Lab Maintenance: Maintain the lab environment to clean and safe standards, including but not limited to: EHS Compliance, Quality Compliance, Equipment Calibration, Stock Materials and Consumables.

REQUIRED QUALIFICATIONS

• 5+ years of hands‑on experience in electronics assembly, testing and rework in an R&D or production environment.
• Strong technical literacy: Ability to read and interpret complex electrical schematics, assembly drawings, wiring diagrams, bill of materials (BOMs), and technical datasheets.
• Demonstrated proficiency in fine‑pitch SMT and through‑hole soldering (IPC‑J‑STD‑001 or equivalent standards). Experience with PCB rework, component replacement, and modification.
• Proven experience in building and modifying complex cable and wire harness assemblies, including crimping, soldering various connector types, and routing (IPC‑620 or equivalent standards).
• Proficiency in diagnosing electronic failures to the component level using standard test equipment and documentation.
• Understanding product development, lifecycles, reliability, and compliance testing.
• Excellent written, verbal, interpersonal and communication skills.
• Self‑organizing: Able to prioritize simultaneous tasks in an electronics lab/test environment.
• Eligible to obtain and maintain an active U.S. Top Secret security clearance.

PREFERRED QUALIFICATIONS

• Education: Associate degree in Electrical/Electronics, Computer, Mechanical Technologies, or related fields.
• Experience in Automotive or Military Ground Vehicle harnessing.
• Active IPC‑610, IPC‑620, and J‑STD‑001 certifications.
• Experience using CAD/ECAD viewers (Altium, Siemens NX, OrCAD, etc.) to locate components/assemblies on PCBs/power systems.
• Experience using Product Lifecycle Management (PLM) systems (e.g. Teamcenter) to navigate drawing lifecycles.
• Environmental testing: Familiarity with thermal chambers, vibration tables, and burn‑in procedures.
• Ability to travel in the Continental United States, up to 10%

US Hourly Range

$42.31 - $52.89 USD

The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation