Electrical Test Technician, Hardware Platform EE Lab

Mosaic.tech; Costa Mesa (CA); On-site; USD 37,000 - 49,000; Full time

Benefits offered by this job

Equity grants

Comprehensive benefits

Job summary

Anduril Industries is seeking an Electrical Test Technician to join the Hardware Engineering Services team. You will build test racks and fixtures, fabricate mil‑spec cable harnesses, and work with electrical engineers to transition hardware from prototype to test.

You will design, assemble, and document electrical test setups, perform tests per MIL‑STD, and troubleshoot down to the component level. This hands‑on role requires lifting and a strong attention to detail.

Qualifications

• 3+ years of hands‑on experience building custom electrical test racks, test fixtures, or cable harnesses in an R&D/prototype/aerospace/defense environment.
• Experience with mil‑spec connectors (D38999, Mighty Mouse, Glenair, Amphenol) and corresponding tooling.
• IPC‑620 certification (CIS or CIT) and J‑STD‑001 soldering certification; recertification upon hire.
• Ability to read electrical schematics, wiring diagrams, and BOMs and extrapolate from incomplete documentation.
• US Person status required to access export‑controlled data.

Responsibilities

• Design and build custom electrical test racks, test fixtures, and GSE from engineering drawings and BOMs.
• Fabricate and terminate cable harnesses to IPC‑620 Class 3 with mil‑spec connectors and EMI shielding.
• Set up, execute, and document electrical test procedures and record findings.
• Operate bench test equipment including oscilloscopes, power supplies, electronic loads, function/signal generators, spectrum analyzers, and DAQ systems.
• Troubleshoot assemblies to component level and drive issues to resolution with engineers.

Skills

Electrical test design

Schematic reading

Troubleshooting

Tools

Oscilloscopes

Signal generators

Multimeters

Power supplies

Job description

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century’s most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril’s family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting‑edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.

ABOUT THE TEAM

The Hardware Platform Organization is Anduril's central hardware engineering org. We build the shared technologies, tools, and infrastructure that power hardware development across every Anduril division, from actuators and propulsion to batteries, avionics, rocket motors, and test operations. Our teams set engineering standards, run development manufacturing and test sites, and develop core technology products that ship across multiple product lines.

ABOUT THE JOB

We are looking for an Electrical Test Technician to join the Hardware Engineering Services team within Anduril's Hardware Platform Organization. You will be embedded in a fast‑paced R&D lab building the test infrastructure and cable harnesses that support hardware development across Anduril's defense products. This is a hands‑on, build‑first role. You'll own custom test rack and fixture builds from scratch, fabricate mil‑spec cable harnesses, and work directly with electrical engineers to bring new hardware from prototype to test.

WHAT YOU'LL DO

• Design and build custom electrical test racks, test fixtures, and ground support equipment (GSE) from engineering drawings, BOMs, and minimal instructions often as the first article in a fast‑changing R&D environment
• Fabricate and terminate cable harnesses to IPC-620 Class 3 standards using mil‑spec connectors including D38999, Mighty Mouse (Glenair), Amphenol, micro‑D, and coaxial/RF assemblies; perform backshell integration, band‑it clamping, and EMI shielding termination
• Set up, execute, and document electrical test procedures including continuity, hi‑pot, insulation resistance, and functional validation; record findings in test records and communicate issues to engineering
• Operate and configure bench test equipment oscilloscopes (including triggering and signal acquisition), power supplies, electronic loads, function generators, signal generators, spectrum analyzers, and DAQ systems
• Troubleshoot electrical assemblies and systems to the component level using systematic root cause analysis; drive issues to resolution independently or in direct collaboration with engineers
• Perform PCBA rework and repair to IPC-610 standards, including SMT and through‑hole components
• Work directly with electrical engineers to interpret drawings, red‑line documentation, flag design or BOM discrepancies, and propose build solutions including from in‑progress or incomplete work instructions
• Support setup, execution, and troubleshooting of EMI/EMC test configurations per MIL-STD-461 and RTCA DO-160

REQUIRED QUALIFICATIONS

• 3+ years of hands‑on experience building custom electrical test racks, test fixtures, or cable harnesses in an R&D, prototype, or aerospace/defense environment production‑line assembly experience alone does not meet this requirement
• Demonstrated fabrication experience with mil‑spec circular connectors specifically D38999, Mighty Mouse, Glenair, Amphenol, or equivalent including crimping, insertion/extraction tooling, backshell integration, and band‑it clamping for EMI shielding
• Current or previously held IPC-620 certification (CIS or CIT); must be able to recertify upon hire
• Current or previously held J‑STD‑001 soldering certification; must be able to recertify upon hire
• Proficiency configuring and operating oscilloscopes including triggering modes, vertical/horizontal scaling, and signal acquisition as well as power supplies, electronic loads, and DMMs
• Ability to read and build from electrical schematics, wiring diagrams, and BOMs with incomplete or in‑progress documentation; proactively identifies and escalates discrepancies before building
• U.S. Person status required as this position needs to access export‑controlled data
• Ability to lift a minimum of 25 lbs unassisted

PREFERRED QUALIFICATIONS

• IPC-620 space addendum certification (CIS‑S or CIT‑S) and/or current IPC-610 PCBA inspection certification
• SMT and through‑hole PCBA rework experience including IC‑level components (QFN, QFP, BGA) under microscope
• Experience with EMI/EMC testing and MIL-STD-461 test setup, including CE102, CS114, RE102, and RS103 configurations
• Background in aerospace, defense, or satellite systems environments (e.g., SpaceX, Northrop Grumman, Boeing, Raytheon, Rocket Lab, SAIC, Shield AI, or equivalent)
• Experience building RF/coaxial cable assemblies including layer‑by‑layer prep and impedance‑controlled terminations
• Familiarity with test automation, data acquisition scripting, or automated EMC software (TILE, Elektra, EMC32, or equivalent)

US Salary Range: $37.02 — $49.04 USD

The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full‑time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top‑tier benefits for full‑time employees, including:

Benefits

At Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you’re supported in health, recovery, and whatever comes next.