Electrical Engineer

Actalent; Redmond (WA); On-site; USD 83,000 - 103,000; Part time

Benefits offered by this job

Medical, dental & vision

401(k)

Life Insurance

Disability benefits

HSA

Transportation benefits

Employee Assistance Program

Paid time off

Job summary

Actalent is seeking an Electrical Engineer in Redmond, WA to design, analyze, and validate complex multi-rail board power architectures for high-reliability systems. You will focus on switching regulators, PDN, and power integrity for FPGA/SoC platforms and high-power peripherals.

Role involves lab bring-up, test planning, and collaboration with mechanical and systems teams to co-design thermal and power solutions for satellites, EVs, and aerospace applications.

Qualifications

• Bachelor's degree in Electrical Engineering or equivalent.
• 5+ years designing hardware with power and board-level focus.
• Ownership of multi-rail board power design from schematic to bring-up.
• Strong fundamentals in switching and linear regulator design.
• Hands-on experience with switching regulators.
• PDN design and power integrity experience.
• Experience with UVLO, OVP, OCP protection.
• Schematic capture and PCB design tools (Xpedition, Cadence, Altium).
• Lab skills with power analyzers, loads, scopes, DMMs.
• High-power design experience for EV/aerospace.
• Familiarity with Mentor Graphics Xpedition XDX Designer.
• Power supply and power electronics design with Xpedition or SPICE.

Responsibilities

• Define the complete board power architecture including rail planning and sequencing.
• Design DC-DC converters and load switches with component selection and margin analysis.
• Design and analyze PDN for stable power across all rails.
• Own power sequencing and protection features such as UVLO, OVP, and OCP.
• Lead power bring-up in the lab under real-world conditions.
• Debug and characterize power supplies using test equipment.
• Develop comprehensive power test plans across voltage and temperature.
• Drive root-cause analysis for power-related failures.
• Contribute to manufacturing readiness with DFM/DFT for power circuits.
• Create bring-up procedures and test documentation.
• Collaborate with mechanical and systems to co-design thermal and power solutions.
• Support development of satellite and EV/aerospace systems.

Skills

Power electronics

Multi-rail design

Switching regulators

PDN design

Power integrity

Lab bring-up

DFM/DFT

Schematic capture

Xpedition CAD

SPICE simulation

Power analysis

Education

Bachelor's degree in Electrical Engineering

Tools

Siemens Xpedition

Cadence

Altium

PowerSI

Sigrity

HyperLynx

Job description

Job Title: Electrical Engineer

Job Description

This role focuses on end-to-end design, analysis, and validation of complex multi-rail board power architectures for high-reliability electronic systems. The electrical engineer defines and implements power solutions for FPGA/SoC platforms, memory, and high-power peripheral loads, with a strong emphasis on switching regulator design, power integrity, and robust hardware performance. The position offers the opportunity to support next-generation satellite systems and contribute to advanced electric vehicle and aerospace-related applications, with potential for conversion to a full-time role.

Responsibilities

• Define the complete board power architecture, including rail planning, power budgeting, sequencing, and power-state or power-mode design for FPGAs, SoCs, memory, and peripheral loads.

• Design DC-DC converters such as buck and multiphase regulators, low-dropout regulators (LDOs), and load switches, including component selection and margin or derating analysis.

• Design and analyze the power distribution network (PDN) to ensure stable, efficient, and reliable power delivery across all rails.

• Own power sequencing and supervision, including implementation of supervisors, inrush control, and protection features such as UVLO, OVP, and OCP.

• Lead power bring-up activities in the lab, ensuring that all rails and power modes function as intended under real-world conditions.

• Debug and characterize power supplies using power analyzers, electronic loads, oscilloscopes, digital multimeters, and thermal analysis tools.

• Develop, write, and execute comprehensive power test plans across voltage and temperature corners, and document test results clearly and thoroughly.

• Drive root-cause analysis and corrective actions for power-related failures, using structured debug methodologies and data-driven approaches.

• Contribute to manufacturing readiness by applying design-for-manufacturability (DFM) and design-for-test (DFT) principles to power circuits.

• Create and maintain bring-up procedures and test documentation to support production and manufacturing test teams.

• Collaborate with cross-functional teams, including mechanical and systems engineering, to co-design thermal and power solutions for high-reliability applications.

• Support the development of next-generation satellite and high-power electric vehicle or aerospace systems through robust power electronics design.

Essential Skills

• Bachelor's degree in Electrical Engineering or an equivalent discipline.

• At least 5 years of industry experience designing hardware with a focus on power and board-level design.

• Demonstrated ownership of a multi-rail board power design from schematic through bring-up and characterization.

• Strong fundamentals in switching and linear regulator design, including magnetics selection and control-loop or stability basics.

• Hands-on experience designing switching regulators and having completed such designs in prior roles.

• Practical experience in power distribution network (PDN) design and power integrity.

• Experience with power sequencing, supervisors, load switches, inrush control, and protection features such as undervoltage lockout (UVLO), overvoltage protection (OVP), and overcurrent protection (OCP).

• Proficiency with schematic capture and PCB design using Xpedition or similar electronic design automation tools such as Siemens Xpedition, Cadence, or Altium.

• Hands-on lab proficiency with power analyzers, electronic loads, oscilloscopes, digital multimeters, and structured debug methodologies.

• Ability to read datasheets and device power specifications and translate them into a correct, robust power tree.

• Experience with high-power design for applications such as electric vehicles or other high-power systems, rather than only low-power consumer electronics.

• Familiarity with Mentor Graphics Xpedition XDX Designer or similar tools.

• Experience in power supply and power electronics design, including use of Xpedition or SPICE-based simulation tools.

Additional Skills & Qualifications

• Experience delivering power solutions for FPGAs and SoCs, including core, transceiver-analog, and memory rails.

• Power integrity simulation experience using tools such as Sigrity or PowerSI, HyperLynx, ANSYS, or similar platforms.

• Exposure to battery or solar-based power systems, particularly in spacecraft or other high-reliability environments.

• Experience with radiation-aware or high-reliability power design for aerospace or space applications.

• Thermal analysis experience and the ability to co-design thermal solutions with mechanical engineering teams.

• Scripting skills for test automation and data analysis, using Python or similar languages.

• Aerospace experience, especially related to satellites or high-reliability platforms, is highly preferred.

• Experience with electric vehicle or EV-related power systems is highly beneficial.

Job Type & Location

This is a Contract position based out of Redmond, WA.

Pay and Benefits

The pay range for this position is $60.00 - $75.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment.

Benefits are subject to change and may be subject to specific elections, plan, or program terms.

If eligible, the benefits available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

Workplace Type

This is a fully onsite position in Redmond,WA.

Application Deadline

This position is anticipated to close on Sep 18, 2026.

About Actalent

Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service.

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email [e-mail] for other accommodation options.

San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.