Dry Film Operator- Trainee

ADP, Inc.

Sunnyvale (CA)

On-site

USD 28,000 - 33,000

Full time

13 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Medical benefits
401(k) plan
Wellness reimbursement
Paid time off

Job summary

Sierra Circuits in Sunnyvale, CA is seeking a Dry Film Operator Trainee to process PCB panels through dry film/lamination steps according to travelers and SOPs.

The role requires standing 8+ hours daily, ability to lift up to 25 lbs, and accurate record-keeping in ProCim. Graveyard shift with hourly pay of $20–$24.

Qualifications

  • High School Diploma preferred.
  • Some experience in dry film for PCB Manufacturing Company preferred
  • Ability to read and understand technical work instructions and standard operating procedures.
  • Ability to wear Personal Protective Equipment (PPE) such as gloves, protective glasses, face-shields, etc. and work within the confines of a room where concentrations of chemicals are located. Must not be allergic to common forms of rubber and plastic use for PPE.
  • Good written and verbal communication skills.
  • Good computer skills and the ability to learn new skills and tasks, especially PCB software (ProCim).
  • Ability to follow procedures/instructions and maintain quality of products at all time.
  • Ability to occasionally lift up to 25 pounds and stand/walk throughout the day.
  • Ability to perform at the highest level in a fast-paced environment.

Responsibilities

  • Check travelers for due date, material type, and special request for priority before setting up to start the process accordingly.
  • Promptly complete tasks/processes within the department and document in a timely manner.
  • Verify the different kinds of layers (inner layers, outer layers, or sublams) on the PCB panels.
  • Check film to ensure that there are no pinholes, scratches, emulsion spots, or shorts and front to back registration for any shifting.
  • Check air gap and line widths for accuracy using the 60X microscope and inspect mylar for dents and scratches.
  • Ensure that there are no resist chips on “repeat” orders.
  • Verify operations against predetermined tolerances to ensure that customer requirements are met.
  • Keep records on computer using the PCB software (ProCim) and complete NCMR form for all products that are rejected from dry film/lamination process before moving to the next step.
  • Perform weekly preventative maintenance on machines and perform house-keeping duties to maintain a clean and safe work environment.
  • Inform Managers of any potential problems.
  • Ability to stand/walk 8 + hours per day.
  • Other duties as assigned.

Skills

Communication skills
Computer skills
Reading SOPs

Education

High School Diploma preferred

Tools

ProCim

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Dry Film Operator- Trainee

LAMINATION DEPT Regular Full-Time Sunnyvale, CA, US

3 days ago Requisition ID: 1331

Salary Range: $20.00 To $24.00 Hourly

ABOUT THE COMPANY:

Sierra Circuits is a Silicon Valley-based leader in printed circuit board manufacturing and assembly, specializing in high-quality, quick-turn and complex prototypes. With over 35 years of experience, Sierra provides a seamless, end-to-end PCB solution—from design and fabrication to assembly and testing—all under one roof at its state-of-the-art facilities in Sunnyvale, California. Sierra Circuits is committed to supporting engineers and designers through extensive educational resources. The company offers free online tools such as the Stackup Designer, Impedance Calculator, Material Selector, and BOM and DFM Checkers, along with technical blogs, webinars, design guides, and its SierraConnect community forum. Sierra Circuit serves all industries including aerospace, defense, medical, automotive, and telecommunications, building PCBs to the highest industry standards, and keeping innovation at the forefront of everything we do.

SUMMARY OF JOB FUNCTION:

The Dry Film Operator Trainee is responsible for processing printed circuit boards (PCB) panels thru various dry film/lamination processes according to the travelers or as directed by Managers while following department standard operating procedures.

  • Check travelers for due date, material type, and special request for priority before setting up to start the process accordingly.
  • Promptly complete tasks/processes within the department and document in a timely manner.
  • Verify the different kinds of layers (inner layers, outer layers, or sublams) on the PCB panels.
  • Check film to ensure that there are no pinholes, scratches, emulsion spots, or shorts and front to back registration for any shifting.
  • Check air gap and line widths for accuracy using the 60X microscope and inspect mylar for dents and scratches.
  • Ensure that there are no resist chips on “repeat” orders.
  • Verify operations against predetermined tolerances to ensure that customer requirements are met.
  • Keep records on computer using the PCB software (ProCim) and complete NCMR form for all products that are rejected from dry film/lamination process before moving to the next step.
  • Perform weekly preventative maintenance on machines and perform house-keeping duties to maintain a clean and safe work environment.
  • Inform Managers of any potential problems.
  • Ability to stand/walk 8 + hours per day.
  • Other duties as assigned.

QUALIFICATIONS:

  • High School Diploma preferred.
  • Some experience in dry film for PCB Manufacturing Company preferred
  • Ability to read and understand technical work instructions and standard operating procedures.
  • Ability to wear Personal Protective Equipment (PPE) such as gloves, protective glasses, face-shields, etc. and work within the confines of a room where concentrations of chemicals are located. Must not be allergic to common forms of rubber and plastic use for PPE.
  • Good written and verbal communication skills.
  • Good computer skills and the ability to learn new skills and tasks as required, especially PCB software (ProCim)
  • Ability to follow procedures/instructions and maintain quality of products at all time.
  • Ability to occasionally lift up to 25 pounds and stand/walk throughout the day.
  • Ability to perform at the highest level in a fast-paced environment.

SHIFT: Graveyard

SALARY: $20 to $24 per hour

MUST be a US Personnel

JOB TYPE: Non Exempt

PHYSICAL DEMANDS:

The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. While performing the duties of this job, the employee is regularly required to talk or hear. The employee must frequently stand, walk, and reach with hands and arms. The ability to lift 20 lbs., open filing cabinets, and bend, stand, or climb on step ladders as necessary.

ENVIRONMENT:

  • The manufacturing facility is exposed to electronics assembly equipment and materials.
  • May require working in a controlled environment with specific temperature and humidity requirements.
  • Personal Protective Equipment (PPE) is required to perform the work.
  • Production floor- Machine shop environment
  • Comply with safety and protective equipment as required.

What We Offer

  • Competitive Benefits Package – Medical (HMO & PPO), Dental, Vision, Flexible Spending Accounts (FSA), Basic Life & AD&D, and Voluntary Benefits
  • 401(k) Retirement Plan
  • Wellness Benefits – Gym/Fitness Membership Reimbursement
  • Paid Time Off – Vacation, Sick Time, and Paid Holidays

ABOUT THE COMPANY:

Sierra Circuits is a Silicon Valley-based leader in printed circuit board manufacturing and assembly, specializing in high-quality, quick-turn and complex prototypes. With over 35 years of experience, Sierra provides a seamless, end-to-end PCB solution—from design and fabrication to assembly and testing—all under one roof at its state-of-the-art facilities in Sunnyvale, California. Sierra Circuits is committed to supporting engineers and designers through extensive educational resources. The company offers free online tools such as the Stackup Designer, Impedance Calculator, Material Selector, and BOM and DFM Checkers, along with technical blogs, webinars, design guides, and its SierraConnect community forum. Sierra Circuit serves all industries including aerospace, defense, medical, automotive, and telecommunications, building PCBs to the highest industry standards, and keeping innovation at the frontier of everything we do.

SUMMARY OF JOB FUNCTION:

The Dry Film Operator Trainee is responsible for processing printed circuit boards (PCB) panels thru various dry film/lamination processes according to the travelers or as directed by Managers while following department standard operating procedures.

  • Check travelers for due date, material type, and special request for priority before setting up to start the process accordingly.
  • Promptly complete tasks/processes within the department and document in a timely manner.
  • Verify the different kinds of layers (inner layers, outer layers, or sublams) on the PCB panels.
  • Check film to ensure that there are no pinholes, scratches, emulsion spots, or shorts and front to back registration for any shifting.
  • Check air gap and line widths for accuracy using the 60X microscope and inspect mylar for dents and scratches.
  • Ensure that there are no resist chips on “repeat” orders.
  • Verify operations against predetermined tolerances to ensure that customer requirements are met.
  • Keep records on computer using the PCB software (ProCim) and complete NCMR form for all products that are rejected from dry film/lamination process before moving to the next step.
  • Perform weekly preventative maintenance on machines and perform house-keeping duties to maintain a clean and safe work environment.
  • Inform Managers of any potential problems.
  • Ability to stand/walk 8 + hours per day.
  • Other duties as assigned.

QUALIFICATIONS:

  • High School Diploma preferred.
  • Some experience in dry film for PCB Manufacturing Company preferred
  • Ability to read and understand technical work instructions and standard operating procedures.
  • Ability to wear Personal Protective Equipment (PPE) such as gloves, protective glasses, face-shields, etc. and work within the confines of a room where concentrations of chemicals are located. Must not be allergic to common forms of rubber and plastic use for PPE.
  • Good written and verbal communication skills.
  • Good computer skills and the ability to learn new skills and tasks as required, especially PCB software (ProCim)
  • Ability to follow procedures/instructions and maintain quality of products at all time.
  • Ability to occasionally lift up to 25 pounds and stand/walk throughout the day.
  • Ability to perform at the highest level in a fast-paced environment.

SHIFT: Graveyard

SALARY: $20 to $24 per hour

MUST be a US Personnel

JOB TYPE: Non Exempt

PHYSICAL DEMANDS:

The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. While performing the duties of this job, the employee is regularly required to talk or hear. The employee must frequently stand, walk, and reach with hands and arms. The ability to lift 20 lbs., open filing cabinets, and bend, stand, or climb on step ladders as necessary.

ENVIRONMENT:

  • The manufacturing facility is exposed to electronics assembly equipment and materials.
  • May require working in a controlled environment with specific temperature and humidity requirements.
  • Personal Protective Equipment (PPE) is required to perform the work.
  • Production floor- Machine shop environment
  • Comply with safety and protective equipment as required.

What We Offer

  • Competitive Benefits Package – Medical (HMO & PPO), Dental, Vision, Flexible Spending Accounts (FSA), Basic Life & AD&D, and Voluntary Benefits
  • 401(k) Retirement Plan
  • Wellness Benefits – Gym/Fitness Membership Reimbursement
  • Paid Time Off – Vacation, Sick Time, and Paid Holidays

Graveyard Shift: 10:00PM- 6:30AM Mon-Fri with Flexibility

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Dry Film Operator- Trainee
Dry Film Operator- Trainee

Sierra Proto Express • Sunnyvale (CA)

On-site
USD 28,000 - 33,000
Medical/Dental/Vision
401(k) Retirement Plan
Wellness Benefits
+1
PCB Wet Lab Technician: Chemistry & Process Control
PCB Wet Lab Technician: Chemistry & Process Control

Sierra Circuits, Inc. • Sunnyvale (CA)

On-site
USD 31,684 - 38,572
Benefit Perks
Touch UP Rework Operator
Touch UP Rework Operator

Sierra Proto Express • San Jose (CA)

On-site
USD 30,000 - 36,000
Medical, dental, vision
401(k) Retirement Plan
Paid Time Off
PCB AOI Programmer & Test Specialist
PCB AOI Programmer & Test Specialist

Sierra Circuits, Inc. • San Jose (CA)

Hybrid
USD 30,000 - 37,000
Medical insurance
Dental insurance
Vision insurance
+3
Screening Operator
Screening Operator

Sierra Circuits, Inc. • Sunnyvale (CA)

On-site
USD 28,000 - 34,000
Competitive benefits package
401(k) retirement plan
Wellness benefits
+1
Fabrication Operator - Trainee
Fabrication Operator - Trainee

Sierra Proto Express • Sunnyvale (CA)

On-site
USD 29,000 - 33,000
Medical benefits
401(k) Retirement Plan
Paid Time Off
Fabrication Operator - Trainee
Fabrication Operator - Trainee

Sierra Circuits, Inc. • Sunnyvale (CA)

On-site
USD 28,000 - 33,000
Medical, Dental, Vision benefits
401(k) Retirement Plan
Wellness Benefits
+1
Lamination Operator - Trainee
Lamination Operator - Trainee

Sierra Circuits, Inc. • Sunnyvale (CA)

On-site
USD 28,000 - 34,000
Competitive Benefits Package
401(k) Retirement Plan
Wellness Benefits – gym membership
+1
SMT SPI Quality Technician
SMT SPI Quality Technician

Sierra Circuits, Inc. • San Jose (CA)

Hybrid
USD 52,000 - 68,000
Medical (HMO & PPO)
Dental
Vision
+3
Senior Equipment Maintenance Tech II — PLC & Electrical
Senior Equipment Maintenance Tech II — PLC & Electrical

Sierra Circuits, Inc. • Sunnyvale (CA)

On-site
USD 34,000 - 48,000
Medical (HMO & PPO)
Dental
Vision
+1