Drafter IV

TCS GovCon; Bedford (IN); On-site; USD 65,000 - 95,000; Full time

Benefits offered by this job

Health benefits

401(k) plan

12 holidays

PTO

Job summary

Tri-County Steel LLC (TCS) seeks an experienced Drafter to provide drafting and technical data support at NSWC Crane for Navy weapons systems and platform integration efforts. This cradle-to-grave environment covers concept and prototype through first article verification, TDP release, and life-cycle sustainment using Creo, SolidWorks, and Windchill.

The successful candidate will work closely with engineers, technicians, and other CAD operators to capture design intent, revise existing

Qualifications

• High School Diploma or equivalent required.
• Minimum eight (8) years of drafting design experience (electrical and mechanical).
• Proficiency in SolidWorks and/or PTC Creo with Windchill PDM.
• Hands-on mechanical/electro-mechanical knowledge and manufacturing/ISO procedures.
• Knowledge of ASME Y14.100, ASME Y14.5 GD&T, MIL-STD-31000.
• Experience with Model-Based Definition (MBD) / 3D annotated models.
• Knowledge of CAD procedures and documentation standards.
• Must hold DoD Secret clearance; Interim Secret to start.

Responsibilities

• Create and modify detailed 3D models and 2D drawings using SolidWorks and Creo.
• Develop and maintain Technical Data Packages (TDPs) in Windchill (PDM).
• Produce detail, assembly, installation, and interface drawings for mech, electro-mech, and electrical hardware.
• Support prototype fabrication and first article efforts with shop-ready drawings.
• Process drawing changes (ECPs, NORs, revisions) and CM deliverables across the lifecycle.
• Collaborate with the customer, engineers, technicians, and CAD operators; attend meetings.
• Maintain configuration management of tasking, files and correspondence; work independently or in a team.
• Guide and mentor other CAD operators and maintain timely decisions under pressure.

Skills

SolidWorks

Creo

GD&T

MBD

Windchill

DoD clearance

TD drafting

Education

High School Diploma

Tools

Windchill

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Drafter IV

Bedford, IN, US

Position Title:
Drafter

Company:
Tri-County Steel LLC (TCS)

Location:
On-site at NSWC Crane

Employment Type:
Full-time

Salary:
Commensurate with experience.

Clearance Level Required:
Secret. Interim Secret required to start.

About Us:
Tri-County Steel LLC (TCS) is a service-disabled veteran-owned small business located in Bedford, Indiana. We have been a trusted defense contractor supporting our industry and government partners for over 14 years, offering a wide variety of logistics, programmatic, and engineering support services. We pride ourselves on a strong commitment to our clients and a focus on quality and reliability in everything we do. Additionally, we are dedicated to the growth and development of our employees, providing opportunities for advancement and professional growth.

Job Summary:
TCS is seeking an experienced Drafter to provide drafting and technical data support at NSWC Crane for Navy weapons systems and weapons platform integration efforts. This is a cradle-to-grave engineering environment: the Drafter will help take hardware from concept and prototype fabrication through first article verification, Technical Data Package (TDP) release, and life-cycle sustainment, using Creo, SolidWorks, and Windchill. The successful candidate will work directly with the customer, engineers, technicians, and other CAD operators to capture design intent, revise existing documentation, and maintain configuration control, and must be able to learn established processes and procedures quickly and efficiently in a high-precision, mission-critical environment.

Essential Functions:

• Create and modify detailed 3D models and 2D drawings using SolidWorks, Creo, and other CAD software as required.
• Develop and maintain Technical Data Packages (TDPs) in Windchill (PDM) in accordance with configuration management requirements.
• Produce detail, assembly, installation, and interface drawings for mechanical, electro-mechanical, and electrical hardware, including prototype and platform-integration components.
• Support prototype fabrication and first article efforts by generating shop-ready drawings and incorporating as-built changes back into the TDP.
• Prepare and process drawing changes (ECPs, NORs, revisions) and support configuration management and data management deliverables across the product life cycle.
• Work closely with the customer, engineers, technicians, and other CAD operators to capture design intent, revise existing documentation, and attend design and status meetings.
• Work independently and as part of a collective team effort to implement changes to designs and/or documentation.
• Delegate tasking and provide guidance to other team members while maintaining sound, timely decision-making under pressure.
• Maintain configuration management of tasking, files, and correspondence to complete assignments in a quick and orderly fashion.
• Perform a variety of moderate to complex tasks using measurement tools including calipers, gauges, tape measures, rulers, and other mechanical devices to support design development and verification/validation of first article pieces.
• Apply drawing standards (ASME Y14.100, MIL-STD-31000) and proper dimensioning and tolerancing practices to all deliverables.

Experience and Skills:

• High School Diploma or equivalent required.
• Minimum eight (8) years of experience in drafting design, including electrical and mechanical drafting.
• Proficiency in SolidWorks and/or PTC Creo, used in conjunction with a PDM configuration system (Windchill preferred).
• Hands-on mechanical/electro-mechanical knowledge and aptitude, with an understanding of currently accepted manufacturing processes and ISO procedures.
• Knowledge and understanding of ASME Y14.100, ASME Y14.5 (GD&T), and MIL-STD-31000 drawing and TDP standards.
• Experience with Model-Based Definition (MBD) / 3D annotated models strongly preferred.
• Knowledge of basic and advanced CAD procedures and the ability to apply them on demand, including formatting, layout, and proper expression of dimensioning and tolerancing.
• Understanding of military standards and specifications.
• Must currently hold and maintain a DoD Secret clearance; an Interim Secret clearance is required to start.
• Strong attention to detail and the ability to communicate complex ideas clearly.
• Ability to quickly complete tasking independently and as a team member, working from detailed or general instructions.

Desired Qualifications:

• Be a self-starter who takes initiative to solve problems and improve drafting processes.
• Exhibit leadership traits and be comfortable guiding other CAD operators and providing updates to stakeholders.
• Work well in a fast-paced, team-driven environment with shifting priorities.
• Be comfortable adapting to a range of tasks, from hands-on measurement and first article verification to configuration management and documentation.
• Prior experience supporting Navy or DoD weapons systems, platform integration, or test and evaluation technical data packages.
• Experience with sheet metal, machined parts, cable/harness, or weapons mounting and interface hardware.
• Interest in growing into a lead CAD/drafting role mentoring other team members.

Travel:
No travel anticipated.

• Comprehensive health benefits, including life, health, dental, vision, short-term disability (STD), and long-term disability (LTD) coverage for eligible employees and family members.
• 401(K) Plan with company match.
• 12 paid holidays.
• Paid time off (PTO).