DMD Mechanical/Piping Design Engineer

Y-12 National Security Complex; Oak Ridge (TN); Sur place; USD 110 000 - 150 000; Plein temps

Avantages offerts par ce poste

Medical plan

401(k) plan

Onsite gym facilities

Onsite cafeterias

Résumé du poste

Y-12 National Security Complex in Oak Ridge, TN is seeking a DMD Mechanical/Piping Design Engineer at Specialist to Senior Specialist level. You will lead upgrades, retrofits, and modifications to piping and related systems across the Y-12 complex.

You will size lines, select piping components, and apply ASME B31.1/B31.3, ASTM and AWWA codes while coordinating with multi-disciplinary teams to meet safety and mission objectives.

Qualifications

• Bachelor of Science in Engineering/Physical Science from ABET-accredited program in the US or equivalents, plus 4 years of relevant experience, or MS with 2 years, or PhD.
• GPA requirements apply for up to 4 years post‑graduation; ranges specified.
• DOE O 426.2A experience and nuclear safety requirements apply.
• Experience in piping system design across boilers, potable/hot/chilled water, gases, cryogenics, vacuum.
• Proficiency in pipe routing and strict adherence to ASME B31.1 and B31.3 Codes.

Responsabilités

• Perform relief valve sizing calculations per industry codes.
• Conduct walk-downs and inspections of process and utility piping systems.
• Prepare reports, drawings, data sheets, and BOMs.
• Apply ASME B31.1/B31.3, ASTM, AWWA and related standards.
• Plan and self-perform project tasks from scope to verification.

Connaissances

Piping codes

Piping design

Regulatory compliance

CAD skills

Communication

Independent work

Formation

ABET-accredited engineering degree

B.S. in Engineering

M.S. in Engineering

Ph.D. in Engineering

Outils

Microstation

Description du poste

Location

Oak Ridge, TN

Job Title

DMD Mechanical/Piping Design Engineer

Career Level From

Specialist

Career Level To

Senior Specialist

Job Specialty

Core Engineering

What You'll Do

As an engineer in Division Managed Design (DMD), you will be responsible for upgrades, retrofits, and modifications to existing systems across the Y-12 complex. DMD engineers are in a unique position to work near-term small to medium scale projects with direct impacts to the Y-12 mission.

Piping Design Engineers are responsible for equipment and piping system designs including line sizing and pressure drop calculations. This will also involve the selection of piping components (e.g., valves, regulators, pumps, etc.).

Key Responsibilities

• Perform relief valve sizing calculations to ensure safety and compliance with industry codes and standards (e.g., ASME B31, API, and Boiler Pressure Vessel code).
• Perform walk-downs and inspections of process and utility piping systems.
• Prepare written reports, drawings/sketches, and technical documents (Equivalencies, P&IDs, data sheets, and bills of material).
• Utilize appropriate regulations, design codes, and standards, including ASME B31.1 and B31.3, ASTM, AWWA as well as other relevant industry standards.
• Plan and self-perform project tasks including scope development, design timelines, requirements, schedule, research, design review, and field verification.

Recommended Attributes

• Knowledgeable in industry piping codes such as ASME, ASTM, and AWWA.
• Experience with design in systems such as potable water and fire-protection supply systems, gas supply systems, acid and caustic fluids, brines, cryogenics, steam and condensate, chilled water systems, chillers, boilers, cooling towers, and vacuum systems.
• Experience with pipe routing and piping component selection.
• Technical knowledge of related engineering systems, applications of engineering and construction methods and materials, and engineering application of computers.
• Experience with Microstation or other CAD software.
• Ability to effectively communicate complex technical information, both written and verbal.
• Ability to work independently and as part of a multifunctional team.
• Ability to self-direct with minimal day-to-day supervision.
• Highly detail-oriented with a strong focus on accuracy and thoroughness in all tasks.

What You Can Expect

• Meaningful work and unique opportunities to support missions vital to national and global security
• Top-notch, dedicated colleagues
• Generous pay and benefits with a stable organization
• Career advancement and professional development programs
• Work-life balance fostered through flexible work options and wellness initiatives

Minimum Job Requirements

• Bachelor of Science in Engineering/Physical Science [Chemistry, Physics, or related] from an Engineering Accreditation Commission (EAC) Accreditation Board of Engineering and Technology (ABET) accredited program in the United States or designated equivalents from Canada or Mexico, the Washington Accord, or the list of substantially equivalent as documented by ABET AND 4 years of relevant experience. OR MS in Engineering /Physical science AND 2 years of relevant experience. OR PhD in Engineering /Physical science.
• There is a minimum Grade Point Average (GPA) requirement up to 4 years post‑graduation at time of offer and confirmed by transcript. Beyond four years from graduation, engineering experience will supersede GPA as a requirement for hire.
  • 3.0/4.0 minimum cumulative GPA for Bachelor degree
  • 3.3 minimum cumulative GPA for Master degree
  • 3.5 minimum cumulative GPA for PhD
• In addition, the applicant must meet the requirements of DOE O 426.2A (i.e., Baccalaureate in engineering or related scientific major 2 years job‑related, and 1‑year nuclear experience; or a DOE O 426.2A alternative). DOE 426.2A experience requirements can be satisfied following employment. In the interim, newly hired personnel will not be assigned duties that could impact the safety basis of nuclear facilities. (Ref. DOE O 426.2A)
• Demonstrated experience in piping system design across diverse applications (e.g., boilers/steam, potable/hot/chilled water, compressed gases, cryogenics, vacuum, caustic/acid)
• Proficiency in pipe routing, component selection, and strict adherence to ASME B31.1 and B31.3 codes including owners inspection requirements
• Knowledge of industry codes (ASME, ASTM, AWWA) and relevant quality programs (ASME NQA-1, 10CFR 830.120)

Preferred Job Requirements

• Experience with CAD modeling, particularly using Bentley software
• 10+ years of experience
• A Professional Engineering License (PE)

Why Y-12?

You get #morethanajob. We encourage employees to achieve a healthy personal balance among home, work and the community. One of the ways we embrace work-life balance is by offering flexible work arrangements that provide alternatives to the traditional workweek, while still meeting business needs. Top talent and personal commitment mean more to our success than any other factors, so we reward our people with the kinds of benefits that make a positive difference in the quality of their lives. Benefits such as: medical plan, prescription drug plan, vision plan, dental plan, employer matched 401(k) savings plan, disability coverage, education reimbursement and many more. Want to stay healthy and fit but hate the cost of a gym membership? Take advantage of one of our onsite workout facilities and eat healthy in our onsite cafeterias. Much more than a workplace, at Y-12, you can build a career that lasts a lifetime.

Notes

The minimum education and experience for the lowest career level in the job posting range are listed under Minimum Job Requirements. Successful candidates hired into a higher career level than the minimum in the range must meet the requirements listed in the job leveling charts for the career level into which they are being hired.

If a range of Career Levels is posted, i.e., Senior Associate to Senior Specialist, internal applicants already in one of the Career Levels would come across at their current Career Level. Internal applicants currently in a lower level Career Level would move to the lowest posted Career Level.

Requires a Q clearance; however all qualified candidates will be considered regardless of their current clearance status. The ability to obtain and maintain a Department of Energy Q clearance is required.

This position may require entry into the Material Access Areas (MAA) and participation in the Human Reliability Program (10 C.F.R. Part 712), which requires successful competition of a DOE counterintelligence evaluation and may include a counterintelligence‑scope polygraph examination.

This position may be categorized as a “designated position” identified by 10 C.F.R. Part 709, requiring successful completion of a DOE counterintelligence evaluation that may include a counterintelligence‑scope polygraph examination.

CNS is a drug‑free workplace. Candidates accepting a job offer will be required to pass a pre-placement physical, drug screening and background investigation. As an employee, you may be required to receive and maintain a security clearance from the United States Department of Energy in order to meet eligibility requirements for access to sensitive information or matter. U.S. citizenship is a requirement for security clearance applicants. All employees are subject to being randomly selected for drug testing without advance notification.

CNS is an equal opportunity employer. All qualified applicants will receive consideration for employment based on merit and without regard to race, color, religion, sex, sexual orientation, national origin, protected veteran status or disability.