DEGREASER & PROCESSOR- 1st Shift

LISI

California

On-site

USD 28,000 - 30,000

Full time

10 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

LISI Aerospace seeks an entry-level inspector to operate cleaning equipment, monitor process parameters, and verify part conformance to specifications. You will read MO and blueprints, measure using calipers or micrometers, and document data in the Shop Floor System.

This role emphasizes quality, safety, and adherence to 5S and ISO standards. Responsibilities include maintaining proper chemical concentrations, monitoring for equipment faults, and ensuring compliance with regulatory and company

Qualifications

  • High school diploma or GED required.
  • Six months to one year related experience and/or training.
  • Ability to read blueprints or manufacturing orders (MO).
  • Experience using calipers or micrometers.

Responsibilities

  • Monitor equipment operation, gauges, and thermometers and adjust controls to regulate temperature and cycle length.
  • Read blueprints or MO for product specs (dimensions and tolerances).
  • Inspect product conformance using calipers/micrometer.
  • Operate Shop Floor System and record MO information.

Skills

Attention to detail
Reading blueprints
Measurement with calipers
Equipment operation
SOP/ISO knowledge

Education

High school diploma or GED

Job description

PRIMARY SUMMARY:

Operate and tend equipment that cleans grease, scales dirt and other foreign object debris (FOD) from manufactured product, Inspects parts for conformance to prepare for additional processes or shipment.

ESSENTIAL DUTIES AND RESPONSIBILITIES:
  • Monitors equipment operation, gauges, and thermometers and adjust controls to maintain and regulate temperature and length of cycles.
  • Reads blueprint or Manufacturing Order (MO) for product specification such as; dimensions and tolerances.
  • Inspects product using calipers and/or micrometer to verify conformance to blueprint or MO.
  • Operates Shop Floor System and records MO information.
  • Measures and/or weighs chemicals and combines to create cleaning solution at specified concentrations for the manufactured product.
  • Adds cleaning solution to equipment as specified to ensure adequate levels and concentrations.
  • Monitors and inspects equipment to detect malfunctions and reports to Supervisor immediately.
  • Drains, cleans, and refills equipment with new cleaning solution at designated intervals following specified procedures to ensure regulatory compliance.
  • Able to recognize cosmetic non-conformances based on Company specifications such as; burrs, galling, cracked edges, slug marks, dimensional changes in production parts and initiate action to prevent non-conformance such as stopping the machine and notifying Supervisor.
  • Understands and has working knowledge as it pertains to; SOP (Standard Operating Procedures), ISO 9001, AS 9100, and ISO 14001.
  • Perform record keeping, data entry, housekeeping, and follows safety regulations.
  • Follow all 5S department procedures which include but are not limited to; keeping floors clean of oil and debris, returning tools to proper locations, organize part pans, and performs other housekeeping duties.
  • Attends all required job related training (internal and external).
  • All employees are responsible for complying with the rules and regulations set forth by Federal, Local, and State government, LISI Aerospace, and HSE Procedures.
  • All employees are responsible for attending all training provided and for adhering to all HSE procedures, policies, and plans, conforming to reporting requirements, and safe operating procedures at all times.
  • All employees are required to bring any known or suspected nonconformance for all company procedures or legal requirements to management’s attention immediately.
  • Continually seek opportunities to improve our HSE performance by establishing objectives and targets, measuring progress, and reporting our results.
  • Other duties may be assigned.
WAYS OF WORKING, EXPERIENCE, AND BEHAVIORS

To perform the job successfully, an individual should demonstrate the following competencies:

  • Analytical – Collects and researches data; Uses intuition and experience to complement data; Understands work flows and procedures.
  • Technical Skills – Able to clearly share expertise and transfer technical knowledge to others.
  • Oral Communication – Speaks clearly and persuasively in positive or negative situations; listens intently to others and seeks clarification; Provides clear and pleasant responses to inquiries regardless of the situation.
  • Written Communication – Writes technical documents clearly and accurately; Transfers technical data into meaningful written documents that can be understood by all levels of the organization.
  • Team Work – Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests.
  • Business Acumen – Understands business implications of decisions; Aligns work with strategic goals.
  • Cost Consciousness – Works within the direction of the department’s resources; Contributes to profits and revenue; Conserves organizational resources.
  • Adaptability – Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.
  • Planning/Organizing – Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Develops realistic action plans.
  • Professionalism – Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.
Supervisory Responsibilities:

This position has no supervisory responsibility.

ESSENTIAL JOB REQUIREMENTS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position is entry level. Candidate must be a quick learner.

Education and/or Experience
  • High school diploma or general education degree (GED); or
  • Six months to one year related experience and/or training; or equivalent combination of education and experience.
SKILLS AND ABILITIES
Computer Skills

To perform this job successfully, an individual should have knowledge of basic mainframe computer systems.

Language Skills

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.

Mathematical Skills

Ability to add and subtract six digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of US currency and weight measurement, volume, and distance.

Reasoning Ability

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

Certificates, licenses, registrations

Evidence of "US person" is required under ITAR.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is frequently required to talk or hear. The employee is occasionally required to stand; sit; use hands to finger, handle, or feel. The employee must frequently lift and/or move up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

ENVIRONMENT, HEALTH AND SAFETY

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently exposed to toxic or caustic chemicals. The employee is regularly exposed moving mechanical parts and fumes or airborne particles and vibration. The noise level in the work environment is usually loud.

The responsibilities of the position include compliance with company and governmental safety, environmental and hazardous materials regulations and procedures. The employee will be required to wear Personal Protective Equipment in specified areas.

Participate in the development and promotion of the HSE culture, be exemplary in terms of health, safety and the environment, in particular by :
- Respecting and ensuring respect for the instructions and rules established in the field of health, safety and the environment (in particular the LISI golden rules)
- Immediately correcting, whenever possible, or reporting to his or her superiors and/or the HSE department, any malfunction or risky situation in the fields of health, safety and environmental protection
- Implementing preventive actions to reduce the environmental footprint and control health and safety risks
- Participate, upon request, in analyses (of risks, incidents) and HSE working groups related to his/her professional scope
- Be familiar with the main health and safety risks and the main environmental impacts relating to the scope of his/her work
- Be familiar with the site's HSE policy and objectives
- To be able to make proposals for improving working conditions and limiting environmental impact

Pay Range: $20-22/Hr.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CNC Machinist II: Setup, Inspect & Train
CNC Machinist II: Setup, Inspect & Train

LISI AEROSPACE NORTH AMERICA • California

On-site
USD 32,000 - 40,000
CNC MACHINIST II-2nd Shift
CNC MACHINIST II-2nd Shift

LISI AEROSPACE NORTH AMERICA • California

On-site
USD 32,000 - 40,000
Precision Machine Maintenance Tech II
Precision Machine Maintenance Tech II

LISI AEROSPACE NORTH AMERICA • California

On-site
USD 34,440 - 46,838
Manufacturing Operations Supervisor II
Manufacturing Operations Supervisor II

LISI AEROSPACE NORTH AMERICA • California

On-site
USD 95,000 - 105,000
GENERAL OPERATOR I-3rd Shift
GENERAL OPERATOR I-3rd Shift

Lisi Medical Jedopa Inc • California

On-site
USD 25,000 - 30,000
GENERAL OPERATOR I-2nd Shift
GENERAL OPERATOR I-2nd Shift

Lisi Medical Jedopa Inc • California

On-site
USD 25,000 - 30,000
Precision Production Operator I – Machining & Assembly
Precision Production Operator I – Machining & Assembly

Lisi Medical Jedopa Inc • California

On-site
USD 25,000 - 30,000
Precision Manufacturing Operator - Multi-Process
Precision Manufacturing Operator - Multi-Process

Lisi Medical Jedopa Inc • California

On-site
USD 25,000 - 30,000
GENERAL OPERATOR I-1st Shift
GENERAL OPERATOR I-1st Shift

LISI • California

On-site
USD 23,000 - 32,000
GENERAL OPERATOR I- 1st Shift
GENERAL OPERATOR I- 1st Shift

LISI • California

On-site
USD 23,000 - 32,000