CUTTING TRAINEE

ADP, Inc.

Conover (NC)

On-site

USD 30,000 - 38,000

Full time

8 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Vanguard Furniture in Conover, NC is hiring a Cutting Department Trainee. You will learn to cut fabric for upholstery, operate hand and automated cutting equipment, and read production tickets and patterns.

The role emphasizes accuracy, safety, and continuous learning in a fast-paced production setting. Training covers fabric identification, cutting techniques, setup of Gerber systems, and proper labeling of cut materials.

Qualifications

  • Willingness and ability to learn fabric cutting methods and procedures.
  • Strong attention to detail and accuracy in repetitive tasks.
  • Ability to follow written and verbal instructions.
  • Ability to read production tickets, notes, and cutting specifications.
  • Basic computer skills and ability to learn computerized cutting equipment.
  • Ability to work efficiently in a fast-paced production environment.

Responsibilities

  • Learn and perform hand-cutting and recutting of fabric for upholstery repairs according to standards.
  • Learn 4-way matching, full-flow cutting, and other techniques for accuracy.
  • Read and interpret production tickets, cutting requests, patterns, and job specs.
  • Check fabric swatches and verify fabric and options before starting a cut.
  • Set up and operate automated Gerber cutting equipment safely and efficiently.
  • Enter commands to retrieve cutting instructions and operate equipment.
  • Monitor cutting equipment and report malfunctions to supervisor.
  • Label and bundle cut materials for production use.
  • Identify issues in pattern design, fabric alignment, or cutting specs and communicate them.

Skills

Willingness to learn
Attention to detail
Reading production tickets
Ability to follow instructions
Basic computer skills
Team collaboration

Tools

Gerber cutting equipment

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

CUTTING TRAINEE

Conover, NC, US

2 days ago Requisition ID: 1338

Job Title: Cutting Trainee

FLSA Status: Non-exempt

Department: Cutting

Reports to: Dept. Supervisor


Position Summary:

The Cutting Department Trainee is responsible for learning and developing the skills necessary to accurately cut fabric for upholstery production and repairs while maintaining Vanguard Furniture's quality standards. This position will receive training in both repair cutting and automated cutting processes, including hand-cutting techniques and operation of automated Gerber cutting equipment.

The Trainee will learn to read and interpret cutting requests, production tickets, patterns, and specifications; identify fabric and pattern requirements; operate cutting equipment safely; and prepare cut materials for subsequent production. This position requires strong attention to detail, a willingness to learn, and the ability to work accurately and efficiently in a production environment.

  • Learn and perform hand-cutting and recutting of fabric for upholstery repairs according to Vanguard Furniture's quality standards and specifications.
  • Learn and utilize 4-way matching, full-flow cutting, and other appropriate cutting techniques to ensure accurate fabric alignment and consistency.
  • Learn to read and interpret production tickets, cutting requests, patterns, and job specifications.
  • Check fabric swatches and verify fabric, options, and other information before beginning a cutting job.
  • Learn to spread and position fabric on the cutting table according to specified requirements.
  • Learn to set up and operate automated Gerber cutting equipment to cut fabric accurately and efficiently.
  • Enter commands into the computer control console to retrieve preprogrammed cutting instructions and operate the automated cutting machine.
  • Monitor cutting equipment during operation and report malfunctions or other issues to the supervisor or programmer.
  • Remove cut plies from the cutting table and properly identify, mark, bundle, bag, and label cut materials for subsequent production use.
  • Verify that all required parts are included and properly identified before bundling materials.
  • Learn to identify and communicate issues involving pattern design, fabric alignment, material quality, or cutting specifications.
  • Complete corrections or repairs to assigned work before beginning new pieces, when applicable.
  • Develop the ability to identify and prevent cutting errors to minimize material waste and production delays.
  • Prioritize assigned work and process cutting requests in a timely manner to support production flow.
  • Maintain a clean, organized, and safe work area.
  • Wear required personal protective equipment, including metal cut-resistant gloves, safety glasses, and work shoes.
  • Follow all safety procedures and promptly report unsafe conditions to the Department Supervisor.
  • Work cooperatively with team members and other production departments to ensure materials are prepared accurately and efficiently.
  • Perform other related duties as assigned by the supervisor.

Essential Skills and Experience

  • Willingness and ability to learn fabric cutting methods and procedures.
  • Strong attention to detail and ability to maintain accuracy while performing repetitive tasks.
  • Ability to follow written and verbal instructions.
  • Ability to read and understand production tickets, job notes, and cutting specifications.
  • Basic computer skills and ability to learn computerized cutting equipment.
  • Ability to identify differences in fabric, patterns, options, and cutting specifications.
  • Ability to work efficiently in a fast-paced production environment.
  • Ability to work independently as skills and proficiency are developed.
  • Ability to communicate effectively with supervisors and coworkers.
  • English proficiency required for reading production tickets and job notes.

Physical Requirements

  • Ability to stand and walk for extended periods during the work shift.
  • Ability to frequently use hands and arms to handle, position, cut, and move fabric.
  • Ability to lift, carry, and move fabric and cut materials as required.
  • Ability to safely operate hand-cutting tools and automated cutting equipment.
  • Ability to perform repetitive movements while maintaining accuracy and attention to detail.

Training & Development

The Cutting Department Trainee will receive on-the-job training in:

  • Fabric identification and inspection
  • Production tickets and cutting specifications
  • Hand-cutting and repair cutting techniques
  • 4-way matching and full-flow cutting
  • Fabric spreading and positioning
  • Computerized cutting programs and controls
  • Part identification, bundling, and labeling
  • Quality standards and inspection procedures
  • Department safety procedures

The Trainee is expected to progressively develop the knowledge, skills, and proficiency necessary to perform cutting responsibilities independently and meet established quality and productivity standards.

General Sign-Off

The employee is expected to adhere to all company policies and to act as a role model in the adherence to policies.

I have read andunderstandthis explanation and job description.

Signature: _______________________________

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

REPAIR CUTTER
REPAIR CUTTER

Vanguard Furniture • Conover (NC)

On-site
USD 38,000 - 52,000
REPAIR CUTTER
REPAIR CUTTER

Vanguard Furniture Company • Conover (NC)

On-site
USD 25,000 - 30,000
REPAIR CUTTER
REPAIR CUTTER

Automatic Data Processing, Inc. • Conover (NC)

On-site
USD 40,000 - 60,000
Upholstery Fabric Cutting Apprentice
Upholstery Fabric Cutting Apprentice

ADP, Inc. • Conover (NC)

On-site
USD 30,000 - 38,000
TRIMMER - TRAINEES and SKILLED
TRIMMER - TRAINEES and SKILLED

ADP, Inc. • Conover (NC)

On-site
USD 17,000 - 22,000
TRIMMER - TRAINEES and SKILLED
TRIMMER - TRAINEES and SKILLED

Vanguard Furniture • Conover (NC)

On-site
USD 17,000 - 25,000
CUTTER - AUTO
CUTTER - AUTO

ADP, Inc. • Conover (NC)

On-site
USD 19,000 - 28,000
CUTTER - AUTO
CUTTER - AUTO

Vanguard Furniture • Conover (NC)

On-site
USD 22,000 - 30,000
Automated Fabric Cutter Operator
Automated Fabric Cutter Operator

Vanguard Furniture Company • Conover (NC)

On-site
USD 22,000 - 30,000
UPHOLSTERER - TRAINEE
UPHOLSTERER - TRAINEE

Vanguard Furniture • Hillsville (VA)

On-site
USD 22,000 - 24,000
Bonuses up to $1,500
Training program and advancement