Control Panel Builder

valaratomics

Torrance (CA)

Presencial

USD 50 000 - 75 000

Tempo integral

14 dias+

Uma candidatura completa num minuto

Currículo e carta de apresentação personalizados, prontos a enviar.

Ultrapassa os filtros ATS

Resumo da oferta

Valar Atomics in Torrance, CA is seeking a hands-on Control Panel Builder to assemble, wire, and finish industrial control panels in a fast-paced manufacturing environment. You will follow electrical schematics, apply safety standards, and verify your work through testing and documentation.

The role requires attention to detail, adherence to UL 508A/NEC codes, and collaboration with engineering to resolve issues and implement changes.

Qualificações

  • Read and interpret electrical schematics, wiring diagrams, and panel layout drawings.
  • Experience cutting, stripping, crimping, labeling, routing, and terminating wires.
  • Familiarity with UL 508A, NEC, and panel-building safety standards.
  • Strong attention to detail, organization, and workmanship quality.
  • Ability to communicate missing parts or discrepancies to engineering or supervision.

Responsabilidades

  • Read and interpret electrical schematics, wiring diagrams, and panel layout drawings.
  • Use hand tools, power tools, crimpers, torque tools, label printers/engravers, and multimeters safely and properly.
  • Mechanically assemble control panel enclosures, backplates, DIN rail components, wire duct, and other devices.
  • Wire control panels including: Power distribution, control circuits, PLC I/O wiring, VFDs, motor starters, relays, terminal blocks, and power supplies.
  • Cut, strip, crimp, label, and route wires per drawing and workmanship standards.
  • Apply wire labels, terminal labels, and device tags per project documentation.
  • Verify parts and materials against the BOM, drawings, and project documentation prior to installation.
  • Identify and report incorrect, damaged, missing, or substitute components.
  • Torque electrical terminations to specified values and document as required.
  • Perform continuity checks and basic electrical verification prior to testing.
  • Maintain cleanliness, organization, and workmanship standards inside enclosures.
  • Build panels in accordance with UL 508A, NEC, project specs, and company quality procedures.
  • Communicate issues, discrepancies, or missing information to engineering or supervision.
  • Support panel testing and troubleshooting as needed.
  • Support rework, modifications, and engineering change implementation as needed.
  • Comply with safety policies, PPE requirements, and LOTO procedures.

Conhecimentos

Reading electrical drawings
Attention to detail
Safety-conscious
Team collaboration

Ferramentas

DIN rail components
Terminal blocks
Relays and contactors
Power supplies
VFDs
Multimeters
Crimpers
Wire strippers
Torque tools
Label printers/engravers

Descrição da oferta de emprego

About Valar Atomics

At Valar Atomics, we're redefining what's possible in energy. Our mission is to make clean, high-temperature nuclear power scalable-unlocking abundant energy for industry, hydrogen, and next-generation manufacturing. We are a team of builders, engineers, and operators who believe nuclear energy should be fast to deploy, factory-made, and built for the real world. Our first pilot plant in Orangeville, Utah will demonstrate how advanced nuclear systems and fuel fabrication can power the future. Joining Valar Atomics means becoming part of a company where autonomy, ownership, and impact exist at every level.

The Team

As part of the Engineering organization, Instrumentations & Controls designs the systems that monitor , automate, and protect Valar's facilities and reactor technologies. The team develops reliable control architectures that enable safe and efficient operations.

The Role

The Control Panel Builder is responsible for assembling, wiring, and finishing industrial control panels according to electrical schematics, wiring diagrams, and applicable codes and standards. This role requires attention to detail, adherence to safety and quality standards, and the ability to work in a fast-paced manufacturing environment.

Key Responsibilities
  • Read and interpret electrical schematics, wiring diagrams, and panel layout drawings
  • Use hand tools, power tools, crimpers, torque tools, label printers/engravers, and multimeters safely and properly
  • Mechanically assemble control panel enclosures, backplates, DIN rail components, wire duct, and other various devices
  • Wire control panels including:
    • Power distribution (single-phase & three-phase)
    • Control circuits
    • PLC I/O wiring
    • VFDs, motor starters, relays, contactors, terminal blocks, and power supplies
  • Cut, strip, crimp, label, and route wires per drawing and workmanship standards
  • Apply wire labels, terminal labels, and device tags per project documentation
  • Verify parts and materials against the BOM, drawings, and project documentation prior to installation
  • Identify and report incorrect, damaged, missing, or substitute components
  • Torque electrical terminations to specified values and document as required
  • Perform continuity checks and basic electrical verification prior to testing
  • Maintain cleanliness, organization, and workmanship standards inside enclosures
  • Build panels in accordance with applicable UL 508A, NEC, project specifications, and company quality procedures
  • Communicate issues, discrepancies, or missing information to engineering or supervision
  • Support panel testing and troubleshooting as needed
  • Support rework, modifications, and engineering change implementation as needed
  • Comply with safety policies, PPE requirements, and LOTO procedures
You Will Be Successful in This Role If
  • Take pride in clean, organized, and consistent panel workmanship
  • Can read electrical drawings carefully and build according to the approved documentation
  • Pay close attention to wire labels, terminal numbers, device tags, and routing details
  • Communicate clearly when drawings, parts, or instructions do not match the actual build
  • Are comfortable working hands-on in a shop, lab, or field environment
  • Follow safety requirements, PPE expectations, and LOTO procedures without shortcuts
  • Stay organized, keep your work area clean, and maintain accurate build documentation
  • Are willing to learn company standards, I&C systems, panel testing, and field support practices
  • Have a quality-first mindset and check your own work before handing it off for testing or inspection
Basical Qualifications
  • 1+ years of experience building, wiring, or assembling industrial control panels; 3+ years preferred
  • Ability to read and interpret electrical schematics, wiring diagrams, and panel layout drawings
  • Experience cutting, stripping, crimping, labeling, routing, and terminating wires
  • Experience with DIN rail components, terminal blocks, relays, contactors, power supplies, circuit breakers, and VFDs
  • Proficient with hand tools and shop tools, including wire strippers, crimpers, torque tools, drills, label printers/engravers, and multimeters
  • Ability to perform basic continuity checks and point-to-point wiring verification
  • Ability to follow BOMs, drawings, work instructions, and quality checklists
  • Knowledge of basic electrical safety practices, PPE requirements, and LOTO procedures
  • Strong attention to detail, cleanliness, organization, and workmanship quality
  • Ability to communicate missing parts, drawing discrepancies, or build issues to engineering or supervision
  • Ability to work independently or as part of a team in a shop/lab environment
  • Ability to lift to 50 lbs. and work on the shop floor for extended periods
Preferred Skills and Experience
  • Familiarity with UL 508A requirements, NEC, and industrial control panel standards
  • Experience with PLC systems such as Allen-Bradley, Siemens, or similar platforms
  • Experien
Obtém a tua avaliação gratuita e confidencial do currículo.

ou arrasta e larga o ficheiro aqui.

Similar jobs

Ofertas semelhantes que vale a pena comparar

Control Panel Builder
Control Panel Builder

Valar Atomics Inc. • New Mexico

Presencial
USD 34 000 - 41 000
Competitive base salary
Equity ownership in a rapidly growing,
Comprehensive medical benefits
+2
Electrical Panel Builder
Electrical Panel Builder

SST Direct • Torrance (CA)

Presencial
USD 36 000 - 66 000
Control Panel Builder - Equity & Impact in Energy Tech
Control Panel Builder - Equity & Impact in Energy Tech

Blackwing • Torrance (CA)

Híbrido
USD 34 000 - 55 000
Competitive base salary
Equity ownership
Medical benefits
+2
Electrical Panel Builder
Electrical Panel Builder

Accelera Staffing • Lincoln (NE)

Presencial
USD 52 000 - 76 000
Panel Builder
Panel Builder

Talent Edge Recruiting • Madison (WI)

Presencial
USD 42 000 - 64 000
Control Panel Builder — High-Impact, Equity, Onsite Meals
Control Panel Builder — High-Impact, Equity, Onsite Meals

Valar Atomics Inc. • New Mexico

Presencial
USD 34 000 - 41 000
Competitive base salary
Equity ownership in a rapidly growing,
Comprehensive medical benefits
+2
Control Panel Builder II
Control Panel Builder II

Alterman, Inc. • Texas

Presencial
USD 28 000 - 39 000
Industrial Control Panel Builder
Industrial Control Panel Builder

valaratomics • Torrance (CA)

Presencial
USD 50 000 - 75 000
Control Panel Technician
Control Panel Technician

AZON USA, Inc. • Kalamazoo (MI)

Presencial
USD 33 000 - 39 000
401(k)
401(k) matching
Employee assistance program
+6
Control Panel Builder
Control Panel Builder

TGG Accounting • Madison (WI)

Presencial
USD 42 000 - 64 000