Commercial Sheet Metal Installer

Merit Contracting

Rochester (MN)

On-site

USD 30,000 - 41,000

Full time

3 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Paid trainings apprenticeship

Job summary

Merit Contracting in Rochester, MN is seeking a Commercial Sheet Metal Installer for a four 10-hour day schedule. Experience welcomed; apprenticeship with the North Central States Regional Council of Carpenters offers paid trainings.

The role focuses on removal and installation of roofing materials, EPDM/PVC membranes, insulation, and flashing, with safety and teamwork emphasized. Candidates should have a high school diploma or equivalent and the ability to perform physical work in varied

Qualifications

  • High School Diploma or equivalent required.
  • Experience in a construction-related industry and/or job preferred.
  • Ability to cut, hammer, fasten and work with roofing materials.
  • Ability to perform basic math functions.
  • Ability to communicate effectively and follow written or verbal instructions and safety rules.

Responsibilities

  • Perform roof removal (tear-offs) and installation of EPDM RPF and related membranes.
  • Assist in laying insulation, felt, ice and water shield, and roof cover installation.
  • Roll out membranes and seal seams per membrane manufacturer guidelines.
  • Cut roofing materials to size and fit flashing as needed.
  • Report to Foreman and coordinate with other crew members.

Skills

Physical fitness
Safety awareness
Roofing knowledge
Reading and following instructions
Math skills

Education

High School Diploma or equivalent

Tools

Hammer
Caulk gun
Tape measure
Utility knife
Tool belt

Job description

Commercial Sheet Metal Installer- 4 ten hour days!

Start your new career in the construction trade! Experience is welcome, but Merit's partnership with North Central States Regional Council of Carpenters (NCSRCC) offers an apprenticeship program with paid trainings! We are currently looking for commercial roofing laborers to join our team. We mainly work in Rochester but do travel to surrounding areas and Iowa.

Summary of Functions:

Under supervision, the Sheet Metal Installer performs a variety of duties relating to the removal and application of roofing materials. Removes existing roofs and covers structural decks with roofing materials other than sheet metal, including composition built-up roofs containing asphalt or pitch, roofing felts and gravel; modified bitumen systems; single-ply roofing membranes; and materials including ACRM asbestos-containing roof material, as trained. Lays and adheres insulation, by mechanically fastening with nails or screws and plates. Applies underlayment, felt, synthetics, ice, and water shield. When applying EPDM, PVC or other single-ply membranes roll out the roofing membrane and seals the seams as specified by the manufacturer of the membrane. Cuts roofing materials to size. Cuts strips of flashing and fits into angles formed by walls, vents, and intersecting roof surfaces. The Sheet Metal Installer also performs other job-related duties as may be assigned.

Major Duties and Responsibilities:

The Sheet Metal Installer must be able to perform work duties as assigned and have a practical understanding of the following responsibilities and tasks:

  • Safety: Must be able to perform all work in an efficient and safe manner. Responsible for having a clear understanding of Merit trained safety policies and procedures including, but not limited to; Personal Protection Equipment, Fall Protection, and Hazard Communication/ Employee Right to Know.
  • Roof Technology: Ability to perform job-specific assignments including, but not limited to; Roof removal (tear-offs) and installation of EPDM RPF. Ability to assist in laying of insulation, felt, ice and water installation, roof cover installation, EPDM seam installation, and perimeter flashing installation.
  • Material Management: Must possess a working knowledge of names and uses of roofing material, proper roof-top transportation of material, and proper roof-top storage of materials.
  • Equipment Operation: Ability to demonstrate safe operation of equipment including, but not limited to; Skill saws, power drills, hammer drills, wheelbarrows, and staplers.
  • Hand Tool Requirement: The Sheet Metal Installer must own and possess the following tools in order to perform the basic requirements of the position.
  • Hammer, flat bar, caulk gun, scissors, trowel, tape measure, utility knife, and tool belt.
Organizational Relationships:

This position will directly report to the Sheet Metal Install Foreman or Lead. There will be frequent interaction with Project Managers as well as regular interaction with other Sheet Metal, Walls, Roofing, Service, and Yard personnel.

Experience and/or Educational Requirements:
  • High School Diploma or equivalent required.
  • Experience in a construction-related industry and/or job preferred.
  • The ability to cut, hammer, fasten and otherwise work with roofing materials.
  • The ability to perform basic math functions.
  • The ability to communicate effectively and follow written or verbal instructions and safety rules.
Physical Requirements:
  • The ability to climb and descend a 40-foot extension-type ladder, unassisted.
  • The ability to work at heights in excess of 10 feet.
  • The ability to repeatedly lift, carry, and shovel roofing materials daily.
    • 30 pounds frequently.
    • 50 pounds somewhat frequently.
    • 60 pounds intermittently.
    • 75 pounds intermittently.
  • The ability to work in a variety of physical positions including, but not limited to; Stooping, squatting, kneeling and/or crawling.
    • Independently able to get in and out of kneeling position.
    • Repeated lift and pull motion from half or full kneel position.

Extensive, daily use of arms and shoulders including sustained overhead reaching with 5 pounds. The ability to regularly grip and safely use small and large power tools. Handcart and wheelbarrow use. The ability to work in a variety of outdoor weather conditions throughout the year.

As part of the application process and review, you may be asked to describe or demonstrate how you will be able to perform the functions of this position. If you wish, we will discuss with you what sort of accommodation may be appropriate to assist you in performing the various functions of this position.

If you are sponsored into the union by Merit Contracting you will be required to complete a pre-placement screening examination where you will demonstrate the physical requirements of the job.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Commercial Roofer
Commercial Roofer

Merit Contracting • Rochester (MN)

On-site
USD 25,000 - 39,000
Paid apprenticeship trainings
Travel to surrounding areas and Iowa
NCSRCC apprenticeship program
Commercial Sheet Metal Installer - 4x10 Days
Commercial Sheet Metal Installer - 4x10 Days

Merit Contracting • Rochester (MN)

On-site
USD 30,000 - 41,000
Paid trainings apprenticeship
Sheet Metal Foreman/Mechanic
Sheet Metal Foreman/Mechanic

Tecta America Corporation • Richmond (VA)

On-site
USD 60,000 - 80,000
Medical
Dental
Vision
+3
Sheet Metal Lead Installer
Sheet Metal Lead Installer

Ideal Building Solutions • Norcross (GA)

On-site
USD 54,000 - 66,000
Weekly Paychecks
Paid vacation and holidays
401K Plan with Company Match
+1
Sheet Metal Roofer
Sheet Metal Roofer

IDEAL • Norcross (GA)

On-site
USD 30,307 - 37,195
401K Plan with Company Match
Paid vacation and holidays
Health and Insurance Benefits
Sheet Metal Fabricator
Sheet Metal Fabricator

TeamCraft Roofing Inc. • Lincolnton (NC)

On-site
USD 30,000 - 44,000
401(k)
Dental insurance
Health insurance
+5
Sheet Metal Technician
Sheet Metal Technician

Chamberlin Roofing & Waterproofing • Abilene (TX)

On-site
USD 28,000 - 52,000
Sheet Metal Installer
Sheet Metal Installer

Koopman Roofing • Pella (IA)

On-site
USD 25,000 - 41,000
Sheet Metal Foreman/Mechanic
Sheet Metal Foreman/Mechanic

Roof Services • Richmond (VA)

On-site
USD 45,000 - 65,000
Medical insurance
Dental insurance
Vision insurance
+3
Commercial Roofing Sheet Metal Worker
Commercial Roofing Sheet Metal Worker

Tecta America Corporation • Tulsa (OK)

On-site
USD 20,000 - 29,000
Health benefits
401(k) with match
Paid time off
+2