CNC Specialist

Torrey Holistics; Fountain Inn (SC); On-site; USD 65,000 - 90,000; Full time

Job summary

Amsted Rail is seeking a CNC Specialist to create, optimize, and run CNC programs using Mastercam for HMCs, VMCs, and turning centers in a hands-on production environment. You will perform full setups, prove-outs, and in‑process adjustments to meet safety, quality, and productivity targets.

You will also provide operation support across shifts, coach operators on best practices, and drive tool-life improvements, strict quality at the source, and TPM participation.

Qualifications

• Experience programming and optimizing CNC schedules for multi-axis machines.
• Proficient with Mastercam or equivalent CAM software.
• Ability to perform first article and in-process inspection.
• Strong understanding of GD&T and precision measurement.

Responsibilities

• Generate, optimize, and run CNC programs for HMC, VMC, and turning centers.
• Perform full machine setups and prove-outs.
• Coach operators on best practices and safety.
• Drive cycle-time reductions and tool-life improvements.

Skills

CNC Programming

Mastercam

HMC/VMC/Turning

G-code/M-code

Tooling & Setup

Quality Inspection

5S/SMED/TPM

OEE/Process Improvement

Job description

Amsted Rail has an opening for a CNC Specialist. The CNC Specialist will create, optimize, and run CNC programs using Mastercam for horizontal machining centers (HMCs), vertical machining centers (VMCs), and CNC turning centers in a hands-on production environment. Perform efficient machine setups, prove-outs, first-article runs, and in-process adjustments to achieve safety, quality, and productivity targets.Provide hands-on machine operation support across shifts and coach operators on best practices. Drive cycle-time reduction, optimize tool life, and promote “quality at the source” across assigned machining equipment. Maintain compliance with company safety, environmental, and personal growth standards. Foster a collaborative work environment and communicate effectively with employees at all levels of the organization.Safety, 5S & Continuous ImprovementFollow and enforce PPE, guarding, and Lock‑Out/Tag‑Out (LOTO) requirements on all machining assets.Identify and correct unsafe machine conditions; escalate guarding or interlock concerns.Lead or participate in 5S events for machining cells; sustain visual standards.Track and improve OEE drivers: availability, performance, and quality where data is available.CNC Programming & OptimizationGenerate, import, and post CNC programs (MasterCam or equivalent) for HMC, VMC, and turning centers.Edit G- & M‑code at the control to resolve issues, optimize feeds/speeds, correct toolpaths, and improve surface finish.Perform cycle‑time studies; recommend and implement reductions through toolpath changes, canned cycles, high‑efficiency strategies, and SMED changeover methods.Standardize program naming, revision control, and document control practices.Coordinate with Engineering on new part introductions and design‑for‑manufacturability feedback.Machine Setup & Operation (HMC / VMC / Turning)Perform full setups: workholding, tooling, touch‑off, offsets, probing (if equipped), coolant and program load.Run first article; verify features to print, adjust tool wear and work offsets, and update control notes.Operate machines in production mode; monitor tool wear, chip evacuation, and repeatability across lots.Support quick changeovers between part numbers; apply SMED principles to reduce spindle downtime.Troubleshoot alarms, tool breakage, chatter, and dimensional drift; escalate when needed.Specify cutting tools, holders, extensions, and pull studs appropriate to material, reach, and tolerance requirements.Inspect and prep raw material, fixture alignments, and reference datums prior to machining.Support preventative maintenance (PM) and Total Productive Maintenance (TPM) tasks on assigned machine groups.Quality & DocumentationPerform in‑process and final inspection using precision measuring instruments (calipers, micrometers, bore gages, height gages, indicators, CMM reports where applicable).Drive ‘Quality at the Source’ by programming in‑machine probing / macros or by creating operator inspection checkpoints.Document setup sheets, tooling lists, and critical characteristic inspection steps for repeat runs.Participate in root‑cause / corrective‑action activities for scrap, rework, or customer returns.Training & Operator DevelopmentTrain CNC operators in program loading, setup steps, tool presetter, offsets, tool changes, part inspection, and basic editing.Coach operators on reading prints, understanding GD&T basics, and responding to SPCAmsted Rail is an Equal Opportunity employer. All applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.To review our EEO Policies or to request assistance please go to www.amstedrail.com/careers/ and select EEO Compliance/Statements. To learn more about us, please visit us online at www.amstedrail.com.Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities and any other basis covered by federal, state, or local law.#ff-dd