CNC Router Operator

Ethan Allen; Maiden (NC); Presencial; USD 22.000 - 33.000; Jornada completa

Descripción de la vacante

Ethan Allen is seeking a hands-on operator in a plywood milling environment. The role involves moving sheets to the milling board, fitting parts into the router, and initiating cuts on a touch screen.

You will pull finished parts, manage scrap, and keep the area clean and safe per procedures. Daily tasks include operating the router, maintaining dust control with vacuums, and restocking plywood with a forklift.

Formación

• Ability to read and follow verbal or written directions.
• Basic math skills for counting, adding and subtracting.

Responsabilidades

• Use suction lift to move plywood sheets to milling board on table for inspection and prep prior to loading the router.
• Slide plywood sheet and milling board from roller table to router and fit into place.
• Load/Select work order on touch screen and initiate cut.
• Pull cut parts and stack on frame buggy.
• Break up plywood scrap and place in scrap buggy, then sweep floor around work area/CNC.
• Push frame buggy to line up and push scrap buggy when1/2 full to grinder conveyor and dump scraps.
• Roll milling board through vacuum system to remove dust and then slide board back to inspect/load table.
• Clean router table using air restricted blow gun and/or vacuum to remove excess dust.
• Use forklift to restock plywood sheets by picking up a hack of plywood (35 sheets) from stock and take it to router.
• Weekly clean-up - Hit the "E" Stop switch and climb on machine to wipe down.
• May perform other duties/ special or non-routine assignments as instructed.

Conocimientos

Read and follow directions

Basic Math

Educación

High school diploma or equivalent

Herramientas

Router operation

CNC equipment

Vacuum system

Descripción del empleo

1. Use suction lift to move plywood sheets to milling board on table for inspection and prep prior to loading the router.
2. Slide plywood sheet and milling board from roller table to router and fit into place.
3. Load/Select work order on touch screen and initiate cut.
4. Pull cut parts and stack on frame buggy.
5. Break up plywood scrap and place in scrap buggy, then sweep floor around work area/CNC.
6. Push frame buggy to line up and push scrap buggy when1/2 full to grinder conveyor and dump scraps.
7. Roll milling board through vacuum system to remove dust and then slide board back to inspect/load table.
8. Clean router table using air restricted blow gun and/or vacuum to remove excess dust.
9. Use forklift to restock plywood sheets by picking up a hack of plywood (35 sheets) from stock and take it to router.
10. Weekly clean-up - Hit the "E" Stop switch and climb on machine to wipe down.
11. May perform other duties/ special or non-routine assignments as instructed.

Requirements:

• Ability to read and follow directions (verbal and written) May require basic math skills: counting, adding and subtracting
• Ability to lift up to 50lbs
• Previous experience preferred