CNC Programmer - Manufacturing: Wausau

Adecco; Town of Wausau (WI); On-site; USD 70,000 - 85,000; Full time

Benefits offered by this job

Medical

Dental

Life Insurance

401K and PTO

Job summary

Adecco is seeking a CNC Programmer for manufacturing in the Wausau, WI area. The CNC Programmer creates and optimizes CNC programs for milling and turning operations, supporting tooling, fixturing, program prove-out, and operator coordination to ensure safe, efficient, and repeatable machining.

The position requires 3–5 years of CNC programming experience in an industrial setting, multi-axis capabilities, and familiarity with CAM software such as Mastercam, Autodesk Fusion, Siemens NX, or

Qualifications

• 3–5 years of experience in CNC programming within a machining or industrial manufacturing environment.
• Hands-on experience creating and optimizing CNC programs for milling and turning operations.
• Experience with multi-axis and/or multi-tool CNC machines preferred.
• Strong understanding of cutting tools, feeds, speeds, work holding, and fixturing methods.
• Ability to read and interpret engineering drawings, GD&T, and machining requirements.

Responsibilities

• Create, modify, and maintain CNC programs for milling and turning operations based on engineering drawings and production requirements.
• Develop programs for machines that handle multiple tools and complex machining sequences within the same setup.
• Select the correct cutting tools, inserts, holders, feeds, and speeds to achieve required quality and cycle time targets.
• Define and improve work holding and fixturing concepts to support safe, repeatable, and efficient machining.
• Coordinate closely with CNC operators and setup personnel during program prove-out, first-piece validation, and production startup.
• Troubleshoot machining issues and revise programs to improve dimensional accuracy, tool life, and machine utilization.
• Support new part introduction by developing machining programs, setup methods, and process documentation.
• Review part prints, tolerances, and GD&T requirements to ensure manufacturability and process capability.
• Maintain program revision control and document programming changes, setup requirements, and tooling information.
• Work with Manufacturing Engineering, Quality, and Production teams to support continuous improvement and standardization.
• Assist in reducing cycle time, improving process stability, and supporting cost reduction initiatives.

Skills

Mastercam

Autodesk Fusion

Siemens NX

Esprit

Multi-axis programming

Mill and Lathe experience

Complete setup experience

Job description

CNC Programmer - Manufacturing: Wausau

CNC Programmer experience in an industrial manufacturing environment - is required! Minimum of 4-5 years in a CNC Programmer position - is required! *Trade school training along with real-world experience is optimal.

Location: Wausau, WI

Job Type: Full-Time

Remote: No, on-site

Salary: Commensurate with experience: $70K to $85K, plus benefits

Benefits: Medical, Dental, Life Insurance, 401K and PTO

Relocation: Not available

Sponsorship: Not available

Skills we are seeking: Mastercam, Autodesk Fusion, Siemens NX, Esprit, Multi-axis programming (3-axis/4-axis/5-axis), Mill and Lathe experience, complete setup experience

Required: This position involves access to technology controlled under U.S. export control laws (ITAR). To comply with these laws, the applicant must be a 'U.S. Person' as defined by the government (a U.S. citizen, lawful permanent resident/Green Card holder, refugee, or asylee). Do you meet this requirement?

Position Summary

The CNC Programmer creates and optimizes CNC programs for milling and turning operations. This role supports tooling, fixturing, program prove-out, and operator coordination to ensure safe, efficient, and repeatable machining.

Qualifications

• 3–5 years of experience in CNC programming within a machining or industrial manufacturing environment.

• Hands-on experience creating and optimizing CNC programs for both milling and turning operations.

• Experience with multi-axis and/or multi-tool CNC machines preferred.

• Strong understanding of cutting tools, feeds, speeds, work holding, and fixturing methods.

• Ability to read and interpret engineering drawings, GD&T, and machining requirements.

• Location – Wausau/Schofield, Wisconsin area.

• Position requires U.S. Citizenship or U.S. Permanent Residency (Green Card) due to ITAR compliance. - Position involves access to technology controlled under U.S. export control laws (ITAR). To comply with these laws, the applicant must be a 'U.S. Person' as defined by the government (a U.S. citizen, lawful permanent resident/Green Card holder, refugee, or asylee). Do you meet this requirement?

Skills Required

• CNC programming for milling, turning, and multi-tool machining centers.

• Strong knowledge of machining processes, cutting parameters, tool selection, and cycle time optimization.

• Experience with work holding, fixturing concepts, and setup improvement.

• Ability to troubleshoot and revise CNC programs during prove-out and production support.

• Knowledge of machine tooling, inserts, offsets, and tool life management.

• Ability to read blueprints, GD&T, and process specifications accurately.

• Familiarity with CAM software (prefer for Auto desk Future CAM), CNC controls, and program verification methods.

• Strong coordination with machine operators, manufacturing engineers, and quality teams.

• Continuous improvement mindset focused on safety, quality, delivery, and productivity.

• Proficiency in Microsoft Office and manufacturing documentation practices.

Key Responsibilities

• Create, modify, and maintain CNC programs for milling and turning operations based on engineering drawings and production requirements.

• Develop programs for machines that handle multiple tools and complex machining sequences within the same setup.

• Select the correct cutting tools, inserts, holders, feeds, and speeds to achieve required quality and cycle time targets.

• Define and improve work holding and fixturing concepts to support safe, repeatable, and efficient machining.

• Coordinate closely with CNC operators and setup personnel during program prove-out, first-piece validation, and production startup.

• Troubleshoot machining issues and revise programs to improve dimensional accuracy, tool life, and machine utilization.

• Support new part introduction by developing machining programs, setup methods, and process documentation.

• Review part prints, tolerances, and GD&T requirements to ensure manufacturability and process capability.

• Maintain program revision control and document programming changes, setup requirements, and tooling information.

• Work with Manufacturing Engineering, Quality, and Production teams to support continuous improvement and standardization.

• Assist in reducing cycle time, improving process stability, and supporting cost reduction initiatives.

BENEFITS

Full time employees regularly scheduled to work 30 hours or more per week are eligible for benefits. Benefits are available the first of the month following 30 days of employment.

EEO

Equal Opportunity Employer – Race/Color/Sex/Religion/National Origin/Sexual Orientation/Gender Identity/Vets/Disabilities

Pay Details: $70,000.00 to $85,000.00 per year

Equal Opportunity Employer/Veterans/Disabled

Military connected talent encouraged to apply

To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy

The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.