CNC Operator Trainee (86427)

The Gill Corporation; El Monte (CA); On-site; USD 35,000 - 42,000; Full time

Job summary

The Gill Corporation in El Monte, CA is seeking a CNC Operator Trainee who will learn to set up and operate NC machines to cut and shape metal parts to specification.

Under supervision, you will review setup sheets, load programs, adjust tooling, and verify dimensions. The role involves working with Aluminum, Titanium and other metals, and may require ITAR compliance.

Qualifications

• Must communicate effectively in English, both verbal and written.
• Understand drawings and ASME Y14.5 geometric tolerances.
• Understand CNC machine programming concepts.
• Able to use computer-based software tools.
• CNC machining experience preferred (Titanium and aluminum).
• Must be able to lift, push and pull at least 50 lbs.
• SAP experience is a plus.
• MS Office/PC proficiency.

Responsibilities

• Reviews setup sheet and specifications to determine setup procedure, machining sequence, and dimensions of finished work piece.
• Loads control media such as disk, tape, or punch card, in machine control console or enter commands to retrieve preprogrammed machine instructions from database.
• Manipulates controls and enters commands to index cutting tool to specified set point and to start machine.
• Changes cutting tools and location of work piece during machining process as specified in setup instructions.
• Measures work piece for conformance to specifications.
• Notifies supervisor of discrepancies.
• Adjusts machine feed and speed and changes cutters to machine parts according to specifications when automatic programming is faulty or machine malfunctions.
• Machines materials such as Aluminum, Titanium and other metals.

Skills

English fluency

ASME Y14.5

CNC programming

Software tools

Titanium/Aluminum

Lifting 50 lbs

SAP experience

MS Office

Tools

SAP

MS Office

Job description

Job Details

Job Location: 0T534 CA - El Monte, CA 91731

Position Type: Full Time

Salary Range: $25.57 - $30.80 Hourly

Job Shift: 1st Shift

Who we are:

The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products.

CNC Operator Trainee

The Gill Corporation is seeking a CNC Operator Trainee who under general supervision of an experienced CNC Operator or Supervisor, sets up and operates numerical control machine to cut, shape, or form metal work pieces to specifications by performing the following duties.

Responsibilities

• Reviews setup sheet and specifications to determine setup procedure, machining sequence, and dimensions of finished work piece.
• Loads control media such as disk, tape, or punch card, in machine control console or enter commands to retrieve preprogrammed machine instructions from database.
• Manipulates controls and enters commands to index cutting tool to specified set point and to start machine.
• Changes cutting tools and location of work piece during machining process as specified in setup instructions.
• Measures work piece for conformance to specifications.
• Notifies supervisor of discrepancies.
• Adjusts machine feed and speed and changes cutters to machine parts according to specifications when automatic programming is faulty or machine malfunctions.
• Machines materials such as Aluminum, Titanium and other metals.
• Learn Brake shear, Deburr and Broach operations.
• Other essential duties may be assigned.

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Required Qualifications

• Must be able to communicate effectively in English both verbally and in writing
• Understand drawings, ASME Y14.5 geometric tolerances
• Understand CNC machine programming concepts
• Ability to satisfactorily use computer based software tools
• CNC machining experience preferred (Titanium and aluminum)
• Must be able to lift, push and pull a minimum of 50 lbs.
• SAP a plus.
• MS Office/PC proficient

PLEASE NOTE:

Certain positions may require the ability to obtain and maintain a DOD Secret Clearance.

ITAR Requirement:

This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A "U.S. person" according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee.

The Gill Corporation is an Equal Opportunity Employer.

Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances.

The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department