CNC OPERATOR - CABINET SHOP

Dassault Falcon Jet; Little Rock (AR); On-site; USD 30,000 - 40,000; Full time

Benefits offered by this job

Healthcare coverage

401k Plan with Company Match

Paid Time Off

Job summary

Dassault Falcon Jet in Little Rock, AR, is seeking a CNC Machinist to produce aircraft parts using CNC equipment and standard tools. You will read 2D/3D data, set up machines, perform calibrations, and maintain strict safety and quality standards while supporting continuous improvement.

The role requires basic math skills, up to 50 lb lifts, and ability to work with adhesives/chemicals in a factory environment. Competitive hourly compensation with overtime eligibility.

Qualifications

• High school diploma or equivalent.
• 6 Months of CNC machining experience.
• Ability to learn one CNC Machine with emphasis on quality, consistency and safety.
• 3 axis double table Start-up / Shut Down and Operating System.
• 3 axis single table Start-up / Shut Down and Operating System.
• Must have the ability to learn or be knowledgeable in all aspects in one of the below items with emphasis on quality, consistency and safety.
• Insert preparation and installation
• Edgefill flat and curved panels
• Burn Process
• ASP process
• Good mechanical aptitude and understanding of basic machine principles
• Conscious of the importance of schedules and budgets
• Basic computer skills
• Able to use and work with common hand tools
• Ability to set up and operate and perform preventive maintenance on all standard equipment or tools related to the CNC Machining process
• Able to work with engineering and industrial definition using 2D/3D data, company standards and work instructions to CNC machine aircraft cabinet components
• Good working knowledge of math and geometry and able to work in both metric and imperial units of measure
• Ability to lift and transport up to 50 lbs.
• Visual capacity and muscular dexterity to work on fine detail, high cost products with a minimum of errors and rework
• Must be able to work with adhesives and chemicals
• Must not be abnormally allergic to solvents, or other CNC related products that produce fumes or dust while using
• Programming knowledge and/or experience
• Ability to solve practical problems when needed
• Ability to interpret a variety of instructions furnished in written, oral or diagram form

Responsibilities

• Work with CNC programs, 2D/3D data, company standards, work instructions, and perform necessary calculations to make aircraft parts.
• Set up, operate, perform calibrations and preventive maintenance on all standard shop equipment or tools related to the CNC process.
• Perform non-CNC machine related processes per procedures and standards with emphasis on quality, consistency and safety.
• Select and verify materials from stock to manufacture parts and maintain traceability of materials per process.
• Communicate with programmers and management to understand program intricacies and efficiently operate machines.
• Inform Team Leader and maintenance of any unplanned machine downtime.
• Perform quality and self-checks of fabricated items per procedures.
• Determine work to be accomplished within planned safety, quality, schedule and cost.
• Log computerized labor data for time and attendance tracking.
• Learn capability of running multiple types of CNC Machines.
• Create and attach parts identification labels to completed parts when applicable.
• Maintain a clean and organized work area.
• Work safely per OSHA and company procedures.
• Support continuous improvement initiatives with management.
• Embrace ACE values to foster an environment of operational excellence.
• Perform all other duties as assigned.

Skills

CNC Operation

Math & Geometry

Safety Focus

Hand Tools

Education

High school diploma

Tools

CNC Machines

Measuring Tools

Job description

• Production
• Full-Time
• Requisition #: CNCOP002435

Description

JOB SUMMARY:

Produces aircraft parts using CNC equipment, shop tools, and standard aircraft materials at or above the expected standards of safety, quality, schedule and cost, using engineering and industrial definitions, procedures and guidelines that support the delivery to the aircraft for all aircraft models. Promote and Foster a positive work environment, and display a respectful attitude.

PRINCIPAL DUTIES/RESPONSIBILITIES (ESSENTIAL FUNCTIONS):

Work with CNC programs, 2D/3D data, company standards, work instructions, and performs necessary calculations using math to complete tasks related to making aircraft parts

Set up, operate, perform calibrations and preventive maintenance on all standard shop equipment or tools related to the CNC process according to specifications

Perform non-CNC machine related processes per procedures and standards with emphasis on quality, consistency and safety

Select and verifies materials from stock to manufacture parts and maintain traceability of materials per process

Communicate and interact with programmers and management to understand intricacies of programs and to efficiently operate the machines

Promptly inform Team Leader and maintenance of any unplanned machine down time

Performs quality and self-checks of fabricated items per company procedures

Determine work to be accomplished, to complete assignments within established plans accordingly to expected standards of safety, quality, schedule and cost

Accurately log computerized labor data collection for time and attendance tracking

Learn the capability of running multiple types of CNC Machines

Creates and attaches parts identification labels to completed parts when applicable

Communicates and interacts well with co-workers and management

Maintain a clean and organized work area

Works in a safe manner in accordance with OSHA and company safety procedures

Supports and propose continuous improvement to management

Embraces ACE values with peers and helps foster a work environment aimed at operational excellence

Perform all other duties as assigned

NON-PRINCIPAL DUTIES/RESPONSIBILITIES (NON-ESSENTIAL FUNCTIONS):

Other duties as assigned

MINIMUM REQUIRED QUALIFICATIONS:

High school diploma or equivalent

6 Months of CNC machining experience

Ability to learn one (1) CNC Machine below with emphasis on quality, consistency and safety

3 axis double table Start-up / Shut Down and Operating System

3 axis single table Start-up / Shut Down and Operating System

Must have the ability to learn or knowledgeable in all aspects in One (1) of the below items with emphasis on quality, consistency and safety

Insert preparation and installation

Edgefill flat and curved panels

Burn Process

ASP process

Good mechanical aptitude and understanding of basic machine principles

Conscious of the importance of schedules and budgets

Basic computer skills

Able to use and work with common hand tools

Ability to set up and operate and perform preventive maintenance on all standard equipment or tools related to the CNC Machining process

Able to work with engineering and industrial definition using 2D/3D data, company standards and work instructions to CNC machine aircraft cabinet components

Good working knowledge of math and geometry and able to work in both metric and imperial units of measure

Ability to lift and transport up to 50 lbs. with or without reasonable accommodation

Visual capacity and muscular dexterity to work on fine detail, high cost products with a minimum of errors and rework

Must be able to work with adhesives and chemicals

Must not be abnormally allergic to solvents, or other CNC related products that produce fumes or dust while using

ADDITIONAL DESIRED QUALIFICATIONS:

Programming knowledge and/or experience

Ability to solve practical problems when needed

Ability to interpret a variety of instructions furnished in written, oral or diagram form

WORKING CONDITIONS:

Typical factory environment. May work in areas with high noise levels and limited climate control. May work in a confined space. Works with company’s approved adhesives and chemicals. May encounter safety hazards such as mechanical hazards (moving machine parts) and health hazards (dust and fumes).

This position is designated as a safety-sensitive position because it includes as part of the essential job duties operating equipment and tools on a routine basis. Additionally, the duties of this position concern the service and completion of aircraft, and overall airworthiness of the aircraft. This position is one in which a lapse of attention could result in injury, illness, or death. For the safety of this employee and others, the employee must be able to work in a constant state of alertness and concentrate for long periods of time while performing safety activities.

COMPENSATION AND BENEFITS:

The compensa tion for this position typically falls between $22 and $29 per hour . This position is eligible for overtime . This position may be eligible for shift differential or relocation assistance. No te, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited tothe type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift.

Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more.

We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.