CNC OPERATOR I - MFG

Dassault Falcon Jet

Arkansas

On-site

USD 30,000 - 33,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Healthcare coverage
401k with company match
Overtime eligibility
Relocation assistance
Tuition reimbursement

Job summary

Dassault Falcon Jet in Arkansas is seeking a CNC Machinist to fabricate aircraft parts using CNC lathes, 3- and 5-axis milling machines, and related equipment. You will read blueprints, verify materials, perform quality checks, and log production data while maintaining a clean, safe work area.

Responsibilities include interfacing with programmers and management to optimize programs, meeting schedule targets, and adhering to 5S standards and OSHA safety procedures in a typical factory environment

Qualifications

  • High school diploma or equivalent.
  • Ability to set up and operate CNC equipment.
  • Work from drawings, standards and 3D models.
  • Strong math and geometry, metric and imperial units.
  • Lift up to 50 lbs with or without accommodation.
  • Power tool training certified within 90 days.
  • LMS training requirements for level 1 within 90 days.
  • Use calibrated measuring equipment.

Responsibilities

  • Work with CNC programs, blueprints and shop instructions.
  • Apply edge fill to honeycomb panels.
  • Verify raw materials from warehouse using CAMS/Nest data.
  • Perform quality checks of fabricated items.
  • Communicate with programmers and management about programs.
  • Maintain a clean, organized work area and follow 5S.
  • Log labor data for time and attendance.
  • Operate safely per OSHA and company procedures.
  • Select materials from stock and document data.
  • Print parts labels and attach when applicable.

Skills

Mechanical aptitude
Computer proficiency
Read drawings
Shop math
Lift up to 50 lbs
CNC setup
Power tool training
LMS training 90 days
Calibrated measuring equipment

Education

High school diploma

Job description

Job Summary

Makes aircraft parts using one or more of the following machines: CNC lathe, 3 axis outers, & 5 axis milling machines, multi-axis turning system and FMS milling system laser cutting machine to cut sheet metal parts or a CNC brake to bend sheet metal parts using different materials based on part type and program.

Principal Duties/Responsibilities (essential Functions)
  • Work with CNC programs, blueprints, company standards, work instructions, and performs necessary calculations using shop math to complete tasks related to making aircraft parts.
  • Apply edge fill compound to honeycomb panels.
  • Receives and verifies raw materials (i.e., wood, aluminum, plastics, etc.) on carts from the warehouse using information such as the CAMS Order and Nest sheet.
  • Perform quality checks of fabricated items.
  • Communicate and interact with programmers and management to understand intricacies of programs and to efficiently operate the machines.
  • Maintain a clean and organized work area.
  • Complete tasks within assigned time limits.
  • Determine work to be accomplished to complete assignments within established schedules and plan accordingly.
  • Accurately log computerized labor data collection for time and attendance tracking.
  • Work in a safe manner in accordance with OSHA and company safety procedures.
  • Select materials from stock when applicable.
  • Record operational data such as lot number and material FLR number, and documents information into CAMS, as required.
  • Makes and prints parts identification labels by using the ID machine and attaches labels to completed parts when applicable.
  • Cleans machines and equipment at different time periods (i.e., every Friday), or as needed, by using cleaning agents (i.e., Windex, Lysol); and maintains cleanliness of workstation areas using 5S standards.
Non-principal Duties/Responsibilities (non-essential Functions)
  • Perform all other duties as assigned.
Minimum Required Qualifications
  • High school diploma or equivalent.
  • Good mechanical aptitude and understanding of basic machine principles.
  • Computer proficient.
  • Ability to set up and operate one type of CNC equipment related to the CNC machining process or in the fabrication area.
  • Ability to work from documentation such as drawings, F-Standards, preparation packages and 3D models.
  • Good working knowledge of math and geometry and able to work in both Metric and Imperial units of measure.
  • Ability to lift and transport up to 50 lbs. with or without reasonable accommodation.
  • Visual capacity and muscular dexterity to work on fine detail, high cost products with a minimum of errors and rework.
  • Power tool training certified within 90 days of assignment.
  • Completion of LMS training requirements for level l within 90 days.
  • Working knowledge and use of calibrated measuring equipment.
Additional Desired Qualifications
  • Programming knowledge and/or experience.
  • Ability to solve practical problems when needed.
  • Ability to interpret a variety of instructions furnished in written, oral or diagram form.
Working Conditions
  • Typical factory environment. May work in areas with high noise levels and limited climate control.
  • May work in a confined space. Works with approved adhesives and chemicals and will be exposed to sanding dust.

This position is designated as a safety-sensitive position because it includes as part of the essential job duties operating equipment and tools on a routine basis. Additionally, the duties of this position concern the service and completion of aircraft, and overall airworthiness of the aircraft. This position is one in which a lapse of attention could result in injury, illness, or death. For the safety of this employee and others, the employee must be able to work in a constant state of alertness and concentrate for long periods of time while performing safety activities.

Compensation And Benefits

The compensation for this position typically falls between $22.00 and $24.00 per hour. This position is eligible for overtime. This position may be eligible for a sign on bonus, shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift.

Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more.

We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CNC OPERATOR I - MFG
CNC OPERATOR I - MFG

Dassault Falcon Jet • Little Rock (AR)

On-site
USD 30,000 - 33,000
Health insurance
Overtime opportunities
Relocation assistance
CNC OPERATOR - CABINET SHOP
CNC OPERATOR - CABINET SHOP

Dassault Falcon Jet • Little Rock (AR)

On-site
USD 30,000 - 40,000
Healthcare coverage
401k Plan with Company Match
Paid Time Off
AIRFRAME STRUCT MECH I (Legacy BU)
AIRFRAME STRUCT MECH I (Legacy BU)

Dassault Falcon Jet • Arkansas

On-site
USD 33,000 - 37,000
Healthcare coverage
401k with company match
Paid time off
+1
CNC OPERATOR I - UPH
CNC OPERATOR I - UPH

Dassault Falcon Jet • Arkansas

On-site
USD 30,000 - 34,000
Healthcare coverage
401k with match
Paid time off
+1
AIRFRAME STRUCT MECH II
AIRFRAME STRUCT MECH II

Dassault Falcon Jet • Arkansas

On-site
USD 33,000 - 37,000
Healthcare coverage
HSA and FSA options
401k with company match
+5
AIRFRAME STRUCT MECH I (Legacy BU)
AIRFRAME STRUCT MECH I (Legacy BU)

Dassault Falcon Jet • Little Rock (AR)

On-site
USD 33,000 - 37,000
Healthcare benefits
401k plan
Overtime opportunities
CNC OPERATOR I - UPH
CNC OPERATOR I - UPH

Dassault Falcon Jet • Little Rock (AR)

On-site
USD 30,000 - 34,000
Health coverage
401k plan
Life insurance
+3
CNC Machinist - Programmer/Operator
CNC Machinist - Programmer/Operator

Southeast Aerospace, Inc. • Melbourne (FL)

On-site
USD 65,000 - 85,000
Health insurance
Dental insurance
401(k) with profit sharing
+3
CNC Machine Operator
CNC Machine Operator

Reliance, Inc. • Windsor (CT)

On-site
USD 34,000 - 48,000
Medical, dental, and vision coverage
401(k) plan with company match
Life and AD&D insurance
+2
Machinist II - 4/10 2nd Shift
Machinist II - 4/10 2nd Shift

Pursuit Aerospace • Florida

On-site
USD 40,000 - 60,000
Health insurance
401(k) match
Paid time off
+1