CNC Machinist III

Innova Engineered Plastics

Shirley (MA)

On-site

USD 60,000 - 80,000

Full time

5 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Sign-on bonus

Job summary

Innova Engineered Plastics is seeking a CNC Machinist III to set up and operate CNC machines, producing finished parts to exact specifications with minimal supervision. The role requires 5–7 years in manufacturing and senior competency, with the ability to mentor CNC Machinist I and II staff.

You will read blueprints, select tooling, and monitor quality per ISO 9001, AS9100, and ISO 13485 standards while maintaining a safe, clean work area on the plastics floor.

Qualifications

  • High school diploma or equivalent is required.
  • 5–7 years of manufacturing experience is required.
  • Strong reading of blueprints and GD&T knowledge.
  • Attention to detail and ability to work independently.
  • Mentor junior machinists and uphold quality standards.

Responsibilities

  • Champion and uphold the company's values, mission, and quality policy.
  • Adhere to and help enforce company policies, procedures, and internal control standards.
  • Ensure compliance with QMS requirements (ISO 9001, AS9100, ISO 13485).
  • Follow all safety rules and PPE requirements, and promptly report hazards, incidents, and near-misses.
  • Perform all assigned machine shop operations.
  • Set up and start up CNC equipment, including positioning and aligning cutting tools.
  • Build trim fixtures.
  • Read and interpret blueprints, layouts, charts, and job orders.
  • Ensure adherence to routed hours and target efficiencies for production.
  • Refill, change, and monitor fluid levels in machines.
  • Use hoists, fasteners, and hand tools, and move toolholders.
  • Perform in-process inspection of machined parts using precision measuring tools.
  • Train and mentor CNC Machinist I and II employees on setups, tooling, and machining best practices.
  • Maintain machine cleanliness and the work area around the machine.
  • Perform other duties as assigned.

Skills

Blueprint reading
GD&T knowledge
Precision measuring
Attention to detail
Mathematical skills
Mentoring

Education

High school diploma or equivalent

Job description

The CNC Machinist III sets up and operates computer numerical control (CNC) machines to fabricate finished parts to specification with the utmost precision and efficiency. Working independently with minimal supervision, this role loads parts into the machine, cycles the machine, and detects malfunctions in machine operations, such as worn or damaged cutting tools. Expertise in setting up machines, selecting appropriate tooling, and optimizing machining processes plays a vital role in success. The CNC Machinist III communicates with co-workers regarding production runs, maintains a safe, organized, and clean work environment, and serves as a resource and mentor for lower-level machinists.

Competency Level: Senior | 5–7 years of experience | Highly proficient across all machining tasks; works independently with minimal supervision and serves as a resource for lower-level machinists.

KEY RESPONSIBILITIES
  • Champion and uphold the company's values, mission, and quality policy in all activities.
  • Adhere to and help enforce company policies, procedures, and internal control standards.
  • Ensure compliance with all applicable Quality Management System (QMS) requirements, including ISO 9001, AS9100, and ISO 13485, as applicable to this role.
  • Follow all safety rules and PPE requirements, and promptly report hazards, incidents, and near-misses.
  • Perform all assigned machine shop operations.
  • Set up and start up CNC equipment, including positioning and aligning cutting tools in toolholders and replacing worn tools.
  • Build trim fixtures.
  • Read and interpret blueprints, layouts, charts, and job orders, and understand how they relate to specifications and tooling instructions.
  • Ensure adherence to routed hours and target efficiencies for production.
  • Refill, change, and monitor fluid levels, such as oil and coolant, in machines.
  • Use hoists, fasteners, and hand tools, and move toolholders manually or by turning handwheels.
  • Perform in-process inspection of machined parts using a variety of precision measuring tools, such as micrometers, microscopes, fixtures, indicators, and special tools.
  • Train and mentor CNC Machinist I and II employees on setups, tooling, and machining best practices.
  • Maintain machine cleanliness and the work area around the machine.
  • Perform other duties as assigned.
EDUCATION & EXPERIENCE
  • High school diploma or equivalent required.
  • Minimum of 5–7 years of experience in a manufacturing facility required.
SKILLS & QUALIFICATIONS
  • Comprehension of basic drawings and blueprints.
  • Working knowledge of GD&T and precision measuring equipment.
  • Basic shop math skills.
  • Basic communication skills.
  • High attention to detail and self-motivated.
  • Ability to perform workmanship skills such as sanding, filling, and deburring.
TRAINING & COMPETENCY REQUIREMENTS
  • Complete new-hire orientation and role-specific on-the-job training prior to performing unsupervised work.
  • Complete Quality Management System (QMS) training applicable to this role, including quality policy awareness and the consequences of nonconformance to product or process requirements.
  • Complete safety training applicable to this role (e.g., PPE use, lockout/tagout, forklift certification).
  • Maintain competency through periodic refresher or retraining as required by department procedures and applicable regulatory requirements.
WORK ENVIRONMENT
  • Manufacturing floor environment.
  • Exposure to moderate noise levels typical of a production floor.
  • Occasional exposure to dust, fumes, or chemicals typical of a plastics manufacturing environment.
  • Use of personal protective equipment (PPE) such as safety glasses, composite or steel-toed boots, and a full-face respirator as needed.
Respiratory Protection Requirement:

Due to chemical exposures associated with the fabrication of trim fixtures, this position requires the use of a full-face respirator. As a condition of employment and in accordance with OSHA 29 CFR 1910.134, the selected candidate must:

  • Complete a respirator medical evaluation and be cleared for respirator use.
  • Pass an annual respirator fit test.
  • Maintain a proper respirator seal, which requires the sealing surface of the face to be free of facial hair during respirator use.

Reasonable accommodations will be considered in accordance with applicable law.

PHYSICAL REQUIREMENTS
  • Prolonged periods standing or walking on the production floor.
  • Frequent bending, kneeling, reaching, or crouching.
  • Repetitive hand and wrist motion.
  • Must be able to lift up to 50 pounds at a time.
EXPECTED HOURS OF WORK
  • This is a full-time non-exempt position required to work Monday through Friday, 40 hours per week, with occasional weekends or overtime based on business needs.
Sign-On Bonus:

$500.00 at hire, $500.00 after 3 months of active employment, $500.00 at 6 months of active employment.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CNC Machinist III
CNC Machinist III

Triton Environmental Consultants, Ltd. • Snoqualmie (WA)

On-site
USD 60,000 - 90,000
CNC Machinist II
CNC Machinist II

Zetec • Snoqualmie (WA)

On-site
USD 48,000 - 64,000
Machinist III - 3rd Shift
Machinist III - 3rd Shift

Standex • New Berlin (WI)

On-site
USD 55,000 - 75,000
CNC Machinist Level III
CNC Machinist Level III

Hayes Manufacturing • Pineville (LA)

On-site
USD 45,000 - 60,000
Computer Numerical Control Machinist
Computer Numerical Control Machinist

Kelly • Garden Grove (CA)

On-site
USD 34,000 - 52,000
Health, dental, vision insurance
401(k) with company match
Paid holidays
CNC Machinist III - Mills or Lathes
CNC Machinist III - Mills or Lathes

P & F Industries • Ogle Township (PA)

On-site
USD 47,000 - 61,000
CNC Lathe Machinist III
CNC Lathe Machinist III

Hi-Tech Manufacturing, LLC • Leland (NC)

On-site
USD 55,000 - 75,000
CNC Machinist I
CNC Machinist I

Zetec • Snoqualmie (WA)

On-site
USD 25,000 - 39,000
CNC III 1st Shift Swiss
CNC III 1st Shift Swiss

Tecomet, Inc • Bristol Township

On-site
USD 55,000 - 75,000
CNC Programmer
CNC Programmer

ProMATIC Automation Inc. • Fletcher (NC)

On-site
USD 40,000 - 60,000