CNC Machinist

Larson Tool

Attleboro (MA)

On-site

USD 55,000 - 85,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

None

Job summary

Larson Tool is seeking an experienced CNC Machinist to set up and operate a range of machines including mills, lathes, WEDM and grinders. The role requires interpreting drawings, selecting tooling, and performing prove-outs while maintaining quality and safety standards.

The position emphasizes tool preparation, precise measurement, and adherence to setup instructions, with strong CAD/CAM and Windows software skills.

Qualifications

  • High school diploma or GED/HiSET with 4–10 years of related experience.
  • Ability to read, write and verbally communicate in English; interpret safety and operational documents.
  • Proficiency with CAD/CAM programming software and basic Windows tools.

Responsibilities

  • Prepare and pre-set tools for machining operations.
  • Mount, align and secure tooling and workpieces on machines.
  • Load control media or enter commands to retrieve instructions.
  • Index cutting tools and set machine position relative to workpiece.
  • Conduct prove-outs and manual programming during setups.
  • Measure parts to specification and adjust as needed.
  • Maintain equipment and keep work area clean and safe.

Skills

CNC Machining
Machine operation
Quality control
Reading & writing English

Education

GED or HiSET
High school diploma

Tools

CAD/CAM software
Windows & MS Office

Job description

Description

SUMMARY:

Sets-up and operates a variety of numerical control machines as workload dictates. Machine types include Mills, Lathes, WEDM and Grinders.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

CNC Machining Tasks:
  • Prepares and pre-sets all tools needed for machining operations. Mounts, aligns, and secures tooling, attachments, and workpiece on machine according to setup instructions
  • Assembles cutting tools in tool holders and positions tool holders in machine spindles as specified or inserts cutting tools in specified machine magazines.
  • Loads control media from network into machine control console or enters commands to retrieve preprogrammed machine instructions from database.
  • Manipulates controls, code and enters commands to index cutting tool to specified set point and to start machine. Calculates and sets machine controls to position spindle in relationship to workpiece, and to regulate factors such as cutting depth, speed, feed, and coolant flow.
  • Conducts prove-outs and manual programming during setups as needed.
  • Monitors display and understand machine operation to detect programming inefficiency or malfunctions such as worn or damaged tooling.
  • Changes cutting tools and location of workpiece during machining process as specified in setup instructions.
  • Measures workpiece for conformance to specifications.
  • Adjusts machine feed and speed to machine parts according to specifications when automatic programming.
General Tasks:
  • Document production as required.
  • Personal measuring instruments are to be maintained and verified on a regular basis to ensure accuracy.
  • Report all out-of-spec. parts conditions to the Lead.
  • Performs preventive maintenance as required.
  • Follow verbal and written instructions.
  • Adhere to all safety policies and procedures.
  • Adhere to all work instruction requirements.
  • Complete all required training program requirements.
  • Maintain equipment and area in a clean and orderly manner.
  • Support Safety, Quality, & Lean Management Programs.
  • Other duties as assigned while working under the direction/supervision of department lead.
Requirements
QUALIFICATIONS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE:

High school or general equivalency diploma (GED or HiSET); four to ten years of related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS:

Ability to read, write and verbally communicate in English; interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals; complete routine reports, forms and other correspondence; speak effectively before department team members or other employees of the organization.

MATHEMATICAL SKILLS:

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, fractions, decimals, ratios, and proportions to practical situations. Ability to apply mathematical concepts such as plane and solid geometry and trigonometry.

COMPUTER SKILLS:

Able to effectively use a Windows based operating system and Microsoft Office products such as Outlook, Excel, and Word. Ability to proficiently use CAD\CAM programming software.

REASONING ABILITY:

Has good reasoning skills and is able to take direction and follow through with minimal supervision.

CERTIFICATES, LICENSES, REGISTRATIONS:

None

PHYSICAL DEMANDS:

The physical demands described are representative of those needed to successfully perform the essential functions of this job. Reasonable accommodations may be considered to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee could be required to:

Frequently:

talk; hear; stand; twist; use hands to handle, grip or feel; reach, push or pull with hands and arms; lift and/or move up to 25 pounds.

Occasionally:

walk; bend; sit; use hand tools; use power tools; lift and/or move up to 50 pounds.

Rarely:

kneel, crouch or crawl.

Specific vision abilities include close vision; distance vision; color vision; peripheral vision; depth perception; ability to adjust focus.
WORK ENVIRONMENT:

While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is moderate. There are hearing protection, safety toed footwear, safety glass and other PPE requirements. The work area is not temperature controlled and may be cool, hot, or humid.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CNC Machinist
CNC Machinist

Larson Tool & Stamping Company • Attleboro (MA)

On-site
USD 50,000 - 65,000
CNC Machinst
CNC Machinst

Duravant • Redmond (OR)

On-site
USD 70,000 - 95,000
CNC Machinst
CNC Machinst

Key Technology, Inc. • Redmond (OR)

On-site
USD 55,000 - 85,000
CNC Programmer/Set-up
CNC Programmer/Set-up

Fairway Staffing Solutions • Perris (CA)

On-site
USD 55,000 - 75,000
CNC Machinist III
CNC Machinist III

Triton Environmental Consultants, Ltd. • Snoqualmie (WA)

On-site
USD 60,000 - 90,000
CNC Programmer
CNC Programmer

Precision Castparts Corp. • Gardena (CA)

On-site
USD 85,000 - 110,000
CNC Machinist Level II
CNC Machinist Level II

Hayes Manufacturing • Pineville (LA)

On-site
USD 45,000 - 65,000
Overtime opportunities
Competitive compensation
CNC Set-up Operator
CNC Set-up Operator

Fairway Staffing Solutions • Perris (CA)

On-site
USD 52,000 - 78,000
CNC Machinist: Multi-Axis Setup & CAM Programming
CNC Machinist: Multi-Axis Setup & CAM Programming

F & B Mfg Llc • Phoenix (AZ)

On-site
USD 25,000 - 36,000
CNC Machinist I
CNC Machinist I

Zetec • Snoqualmie (WA)

On-site
USD 25,000 - 39,000