CNC Machine Operator (2nd shift)

PPI; Humboldt (IA); On-site; USD 42,000 - 56,000; Full time

Job summary

Precision, Inc. in Humboldt, IA is seeking a CNC Machine Operator (Lathe) for the 2nd shift. This full-time, on-site role involves setting up and operating CNC lathes, reading work orders, and ensuring parts meet quality tolerances while following safety procedures.

The position requires a high school diploma or GED, basic computer skills, and familiarity with measurement tools such as micrometers. Training for programming and tool changes is provided as needed.

Qualifications

• Ability to read blueprints and job orders.
• Basic computer skills and use of measurement tools.
• Math and mechanical aptitude required.
• Concentration when programming CNC.

Responsibilities

• Set up and operate CNC lathe; perform ID/OD turning.
• Produce parts within tolerances and verify with measuring tools.
• Read work orders and production schedules.
• Maintain safe work practices and housekeeping.
• Program new sequences and change tooling as needed.
• Perform preventative maintenance.

Skills

Blueprint reading

Computer skills

Measuring tools

Math ability

Programming concentration

Education

High school diploma or GED

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

CNC Machine Operator (2nd shift)

Full Time Humboldt, IA, US

2 days ago Requisition ID: 1235

Job Title:CNC Machine Operator (Lathe)

Division: Precision Pulley & Idler (PPI)

Location: Humboldt, IA - On-site

Shift: 2nd

FLSA:Non-Exempt

Grade:3

Job Status:Full Time

Travel Required:0%

Revision Date:January 2023

Reports To:Production Supervisor

PURPOSE OF POSITION

To perform the set up and operation of a CNC Lathe

The following duties are normal for this position. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned.

More specifically, the employee owner will:

• Perform setup and operation of CNC (or manual) Lathe – Typical operations include: ID and OD turning
• Produce quality parts that fall within the supplied, or standard, tolerances
• Be able to use measuring equipment to validate and ensure part quality
• Read and follow work orders, including Production Schedules and Manufacturing Orders
• Achieve a throughput level that is at or above expectation
• Be able to run a manual lathe
• Occasionally run multiple machines, simultaneously
• Work with a good attitude and willingness to be flexible with daily demands
• Perform all activities in a safe manner, per job specific training and general safety rules
• Be able to distinguish the size difference of the tube stock, shafting, slugs, and plates
• Be able to perform programming sequence to create new programs
• Be able to change out tooling – Including: cutting inserts, tool holders, drills, etc.
• Perform required preventative maintenance
• Maintain knowledge on differences between pulleys and pulley subcomponents
• Willingness to work in other areas/functions within the plant
• Perform routine maintenance and cleaning
• Communicate positively with supervisors, fellow workers, and other internal customers

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Ability to read and understand blueprints and job orders.
• Basic computer skills.
• Know how to read manual and digital micrometers, bore gauges, dial calipers, tape measure, depth micrometer and inside micrometer.
• Math and mechanical abilities.
• Concentration required when programming.

EDUCATION – EXPERIENCE – COMPUTER SKILLS

• High school diploma or a general education degree (GED); or
• One to three months related experience and/or training; or
• Equivalent combination of education and experience.

TRAINING – CERTIFICATIONS – LICENSES

• Continually participate in additional training related to the job.

COMPETENCIES

• Safety and Security - Observes safety and security procedures; Uses equipment properly.
• Problem Solving - Identifies and resolves issues in a timely manner.
• Communication Skills – Speaks clearly, listens and receives clarification, respond to questions.
• Dependability -Follows instructions, responds to management direction, and takes responsibility.
• Quality Assurance - Demonstrates accuracy and thoroughness.
• Ethics/Professionalism - Treats people with respect; Works ethically and with integrity.
• Organizational Support - Follows policies and procedures.
• Judgment - Exhibits sound and accurate judgment.

PHYSICAL DEMANDS

While performing the duties of this position, the employee:

• Must be able to frequently stoop/bend.
• Must be able to regularly use hands and arms.
• Must be able to regularly stand and walk.
• Must be able to occasionally lift and/or move up to 45 pounds with hoist available.
• Must be able to frequently lift and/or move up to 25 pounds.
• Specific vision abilities required by this job include close, distance, color, and peripheral vision.
• Specific hearing abilities required for this job include the ability to hear equipment alarms and the ability to hear instructions from others.

ENVIRONMENTAL ADAPTABILITY

• The noise level in the work environment is usually loud.
• While performing the duties of the job, the employee may occasionally be exposed to heat and humidity (non-weather) and industrial equipment.
• The employee is frequently exposed to moderate temperature, humidity in the work place and industrial equipment.
• The employee is occasionally exposed to coolant and hot metal chips.
• Steel-toe safety shoes, safety glasses, hearing protection, when necessary, protective gloves and welding equipment on occasion.

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Precision, Inc. is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, The Employer will provide reasonable accommodations to qualified individuals with disabilities and encourages prospective employees and incumbents to discuss potential accommodations with Precision, Inc.