CG FINISH REPAIR

Vanguard Furniture Co Inc; Conover (NC); On-site; USD 21,000 - 30,000; Full time

Job summary

CG FINISH REPAIR in Conover, NC is seeking an experienced wood finishing technician to restore and protect furniture finishes. You will apply paints, stains, lacquers, and sealers with brushes, spray equipment, or manual methods, ensuring color accuracy per specifications.

The role requires reading finish specifications, surface preparation, and maintaining a clean, safe workstation. Heavy lifting and standing for long periods are common; attention to detail and quality are essential.

Qualifications

• Experience with finishes for wood and veneers.
• Ability to mix finishes to color specifications.
• Ability to match color consistency and color shade.

Responsibilities

• Finish surfaces using brushes, spray, or hand application of paints, stains, or sealers.
• Disassemble and prepare items for finishing.
• Inspect furniture to determine repair/restoration needs and select best method.
• Fill cracks, remove imperfections, and repair parts as directed.
• Maintain a clean, safe workstation and follow safety procedures.
• Operate tools such as spray guns, glue guns, and sanding tools as required.
• Follow finish specifications and read tickets and instructions.

Skills

Wood finishing

Color matching

Reading a ruler

English reading

Safety awareness

Manual dexterity

Tools

Spray gun

Sanding tools

Glue gun

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

CG FINISH REPAIR

Conover, NC, US

2 days ago Requisition ID: 1324

Position Summary: Repair finishes to specified color and/or finish utilizing knowledge of wood properties and finish.

Position Responsibilities:

• Brush, spray, or hand-rub finishing ingredients, such as paint, oil, stain, or wax, onto and into wood grain; then apply lacquer or other sealers Lift frame onto finishing table
• Disassemble items to prepare them for finishing, using hand tools
• Examine furniture to determine the extent of damage and to decide on the best method for repair or restoration
• Fill and smooth cracks or depressions, remove marks and imperfections, and repair broken parts, using plastic or wood putty, glue, nails, and/or screws
• Inspects cases for runs and/or other imperfections.
• Perform all duties safely and report any safety hazards to your immediate supervisor; including techniques for grounding / bonding where needed
• Complete other assigned duties as directed by supervisor.
• Maintains neat and orderly workstation; keeps equipment clean.
• Wear required safety glasses and work shoes; works safely and reports unsafe conditions to Dept. Supervisor. Also performs required stretching exercises.
• Performs other duties as required by supervisor.

Essential Skills and Experience:

• Experience with finishes for all types of wood and veneers
• Capable to mix ingredients to obtain specified color/shade to specifications or match existing finishes
• Ability to achieve color consistency and color matches on a regular basis
• Ability to apply primer, topcoat paint, stain, and any wiped or spray-applied coatings to detailed parts as per customer specifications and industry quality standards
• Skilled in removing excess material and prepares the surface for finishing
• Must be familiar with and have operational knowledge of department tools
• Familiar with reading a ruler and have basic math skills
• English required for reading tickets and instructions.
• Must be able to setup materials in pots.
• Must be able to understand and follow a finish specification for use of correct materials.

Physical demands and work environment:

• Lift / Carry: Frequently lifting 50 – 100 lbs. onto and off workstation; occasionally lifting in excess of 100 lbs.; team lift greater weights. Must be able to lift/remove frame from worktable.
• Standing / Walking:Must be able to stand and walk consistently during the 8+ hour day.
• Reach / Handle / Grasp/Feel: Repetitive use of hands required. Must be able to use spray gun entire shift.
• Bend / Lift / Stoop:Gathering supplies throughout day from various heights.
• Push/Pull: Must be able to push frames into designated work zones; or pull with designated tow tool.
• Environment:Indoors, controlled airflow, depending on building may or may not be air conditioned.
• Climbing: Must be able to climb up/down ladders between 2 – 8 feet tall using 3-point contact method to reach various heights requiring sanding or finishing or to clean booth and change out filters.
• Tool Usage: Required to use glue gun, spray gun, rubber mallet, hammer, screwdriver, channel locks, adjustable wrenches, and other sanding/finishing tools for entire shift. Use brass scraper to clean booths. Must use wash basin to clean tools.
• Automation:Provided scissor lift for positioning in some booths.
• Color Determination:Must distinguish colors and finishes for match, accuracy and quality.
• Near Acuity: Requires close vision of less than 3 feet, with or without corrective lenses, for precision.