Cell Machine Specialist Trainee LG 7

TriMas Corporation; Commerce (CA); On-site; USD 35,000 - 43,000; Full time

Job summary

Monogram Aerospace Fasteners is hiring for an entry-level Cell Machine Specialist Trainee LG 7 in Commerce, CA. The role involves learning setup and operation of a major machine tool in the cell, and performing machining to tight tolerances under supervision.

You will use precision measuring tools, read blueprints, and maintain production records while building foundational skills in machining processes and safety procedures.

Qualifications

• Demonstrated ability to read and write English for shop documents.
• Must read blueprints and use precision measuring instruments.
• 6 months to 1 year machining experience or equivalent.

Responsibilities

• Set up and operate a major machine tool in the cell under supervision.
• Measure and verify dimensions using precision instruments.
• Maintain production logs and document processes.

Skills

Reading blueprints

Calipers & micrometers

English literacy

Team collaboration

Education

9th grade education or equivalent

Tools

Calipers

Micrometers

Job description

Cell Machine Specialist Trainee LG 7

Company: Monogram Aerospace Fasteners

Primary Location: 3423 S Garfield Avenue, Commerce, CA 90040 USA

Workplace Type: On-site

Employment Type: Hourly | Full-Time

Function: Manufacturing Production / Distribution

Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Main Duties & Responsibilities

JOB SUMMARY: Entry level position. Under close
supervision learns basic setup and operations of a major machine tool in the assigned cell.
Learns to machine
surfaces of various types of metals to specifications and close tolerances. Uses precision measuring
instruments. Learns to select tools, dies, cams, wheels, spacers etc. for proper set-up, and make
minor repairs to machines. While in this position employee will be expected to
operate other cell machines or perform other cell duties while not actively
training.

DESCRIPTION OF ESSENTIAL FUNCTIONS AND RESPONSIBILITIES:

1. Include the
   following. Other duties may be assigned as necessitated by Company production requirements.
   Under the
   supervision of the Supervisor and direction of Leadperson performs the following:
   Learns to set-up and operate a major machine tool used in the cell. Learns calibration, adjustment, layout, safe operating procedures etc. per requirements on a task basis.


2. Measures, marks and scribes stock for machining requirements. Verifies dimensions, alignments and clearances to specifications. Visually or with various precision measuring instruments such as calipers, micrometers, gauges, etc. checks product for accuracy. Sets specific machine speeds, feed rates and spacings per task requirements. Performs machining to close tolerances as called out by blueprints/documentation.


3. Provides necessary counts, processes documentation correctly, and maintains daily production logs using computer software applications or production worksheets. Keeps interim records for subassemblies, material, tooling, rework, etc. while in the cell. Gains familiarity with Statistical Process Control (SPC) where applicable.


4. Uses basic Machine Shop Theory to understand specifications such as blueprints, sketches, models or descriptions, or verbal orders, and visualizes product to determine dimensions, tolerances and parts to be machined. Learns good machining procedures, basic tooling principles and techniques, and concepts of efficiency of optimizing sequence of operations.


5. Works as an active team member by participating in problem solving, team building, and all other team activities to improve the processes, productivity, quality, etc. of the production operations in a cell. Uses interpersonal skills as well as good written and verbal communications. Assists other cell members as required

Equipment/Process Responsibilities

Performs duties where property, tools, equipment or machines may be damaged, or
man hours lost through improper daily maintenance or attention to processing.
Sets up and makes adjustments of major machine tool attachments, tooling, accessories etc.. Maintains
and effects minor repairs of machine.

Material or Product Responsibilities

Performs duties that require close attention to work and supporting
documentation specifications and other requirements. Responsibility for accuracy of parts
machined. Visually and/or with
measuring instruments, checks work performed for proper results. Work is frequently checked by Trainer.

Responsibility for Communications/Work with others

Accuracy of communication is mandatory to the
successful production and qualification of workpieces. Must
communicate to appropriate personnel any problems or concerns regarding quality of work
received, training taught, or time flow of work in
progress as it affects production schedules.

Safety Responsibilities

Good housekeeping, knowledge of good machining safety is necessary. Adherence to Company Safety Rules is
mandatory. Protective equipment and clothing appropriate to the task at hand is
required

Initiative and Ingenuity

Initiative to learn the job is a basic requirement for this entry level position. Minimal
initiative or ingenuity toward production machining processes used by Company is required
due to entry level nature of machining work. As learning progresses, job will require more
initiative in being trained/taught
about machine, processes etc. and in solving problems associated with the set-up and operation of the
machine. Will use ingenuity in using or adapting tooling and shop aids to perform machining
operations. Makes suggestions
for improving the efficiency of work flow or equipment operation. Takes on or
reports for additional work as current tasks are completed. Performs other work related tasks as
deemed necessary by Company needs.

WORK ENVIRONMENT

Environmental Surroundings -

Work is in a machine shop environment where noise, temperature fluctuations, the repetitive nature
of job, etc. are less desirable than in a
typical office environment.

Unavoidable Hazards

Possible hazards related to cuts, bruises, finger and hand injuries and muscle strains. Some exposure to
metalworking fluids and airborne particles. Protective safety wear and
equipment should be worn as appropriate to the
task at hand.

Physical

Able to lift up to 50 pounds.
Requires strength to adjust requisite equipment to set-up specifications. Hand
and finger manipulation required for machine and computer operation. Able to reach, bend and
stretch. Able to use tools
required for machine set-up which may be fatiguing and require extensive physical exertion for extended periods
of time. Most job assignments require standing and/or sitting for periods
exceeding 15 minutes at a time.

Mental

Work at times is highly repetitive
and monotonous. However, set-up and/or machine repair is varied and may require improvisation and
ingenuity. Reasoning ability required to interpret basic specifications and
documentation of a
technical nature. Must be able to draw valid conclusions from a variety of
machining technical variables. Required to organize work flow for best efficiency.

Visual

Close attention to detail with
moderate eye concentration over long periods of time. Able to read various precision
instruments such as micrometers, calipers, gauges, etc. Must be able to visually check workpieces for
quality.

1st shift 5:00am to 1:30 pm LG 7

Qualifications

EDUCATION/TRAINING

Demonstrated
ability to read and write English of a level required in Company shop documents
and computer software entry and processing requirements. Must be capable of applying basic
mathematical operations including using fractions and decimals, as required by
cell machining operations. Generally equivalent to ninth grade level. Must be able to read
blueprints. Must be able to use precision measuring instruments such as
calipers and micrometers.

EXPERIENCE

Requires 6
months to 1 year work experience or equivalent skills and advanced knowledge in the set-up and/or
operation of a major machine tool, as well as other tools and equipment which are similar or
comparable to those used by the Company and which are necessary to fulfill job requirements. Must have
read precision measuring instruments such as calipers and micrometers. Must
have demonstrated ability to read blueprints similar or comparable to those
used in machining operations by the Company.

Compensation

In compliance with all states and
cities requiring transparency of pay, the expected pay range for this position
is $25.06 to $31.04/hour

Compensation can vary depending
on several factors, including a candidate's qualifications, skills, experience,
competencies, and geographic location. Some roles may qualify for extra
incentives like equity, commissions, or other variable performance-related
bonuses. Further details will be provided by our recruiting team during
the interview process.

This role involves access to technical data and/or hardware
subject to U.S. export control laws and regulations, including the
International Traffic in Arms Regulations (ITAR) and the Export Administration
Regulations (EAR). In order to comply with these laws, employment is contingent
upon verifying your status as a \"U.S. Person\" as defined by 22 C.F.R. * 120.15,
or obtaining any required government authorization.

Monogram Aerospace Fasteners promotes a drug-free workplace.
Therefore, this employment offer is contingent upon the successful completion
of a drug screen. This offer is also contingent upon the results of a
reference/background check that is satisfactory to Monogram Aerospace Fasteners
and signing a Confidential Information and Invention Assignment Agreement and
an Agreement to Arbitrate.

Benefits

Benefit offerings include Medical Insurance and Prescription Drugs, Dental Insurance, Vision Insurance, Flexible Spending Accounts, Life Insurance, Short-Term Disability, Long-Term Disability Insurance (for eligible employees), Employee Assistance Plan (EAP), Paid Time Off (may include vacation and sick time), Retirement Program, and Other Voluntary Benefits.