Calibration Technician

Regal Rexnord; Simi Valley (CA); On-site; USD 36,000 - 50,000; Full time

Benefits offered by this job

Medical

Dental

Vision and Prescription Drug Coverage

HSA and FSA options

Paid Time Off

Tuition Assistance

Job summary

Regal Rexnord in Simi Valley, CA is seeking an associate Inspector to cover inspection responsibilities across the facility. You will use precision measuring instruments to verify conformance to engineering specs and support calibration and gaging activities.

Responsibilities include maintaining gage setup, calibrations, training operators, and working with quality engineering on new or modified gaging. This onsite role offers a pay range of $26–$36 per hour, DOE.

Qualifications

• High school diploma or equivalent with 5 years of inspection and gaging in a mechanical calibration environment.
• Knowledge of ISO 10012 and ANSI/NCSL Z540-1 calibration system requirements.
• Experience with AS9100/ISO9001 quality systems, GD&T, and MTM methods (MSA, GR&R, Cpk).
• Ability to set up inspection equipment, perform calibration, and maintain records with GAGEtrak.
• Lean manufacturing exposure and strong communication skills.

Responsibilities

• Operate inspection gauges and measuring equipment to verify product conformance.
• Set up and adjust gauges per specifications and verify calibration history.
• Develop standard work for gage setup and reduce queue time.
• Train operators on proper gauge usage and longevity.
• Support quality engineering on new or modified gaging and MSAs.
• Maintain calibration records and track equipment history in calibration software.
• Communicate non-compliances and work with team to ensure quality requirements are met.

Skills

Inspection experience

Gaging knowledge

ISO 10012 knowledge

AS9100/ISO9001

Calibrations

Gage R&R

Blueprint reading

GD&T

MSA

Lean manufacturing

Communication skills

Education

High school diploma or equivalent

Tools

GAGEtrak

Calibration software

Calipers/Micrometers

Job description

Work Model

This is a fully onsite role, with work performed at your designated Regal Rexnord office.

Pay Range $26 to $36 /hr. DOE Several factors are considered when extending an offer, including but not limited to, the role responsibilities, candidate’s work experience, skills and education.

Location

located in Simi Valley, California

Brief Description

Rexnord Industries, LLC, a leading supplier in the Aerospace industry, is seeking an associate that would cover several areas of Inspection responsibility throughout the facility. This position is a critical link between the shop floor associates and through the use of proper calibrated tools and equipment to ensure product conforms to the engineering specifications and requirements. The person in this role will ensure their performance standards are met and take appropriate action where necessary to meet agreed deadlines, quality performance, and assigned targets. The role also includes supporting quality needs and cross training throughout the department. You will be responsible for supporting team cohesion within the department and the facility.

Key Accountabilities

• Ensure adherence to Company Safety and Work rules.


• Support SQDC (Safety, Quality, Delivery, and Cost) metrics in all areas relevant to this position.


• Perform inspection operations using a variety of precision measuring instruments such as calipers, micrometers, air gages, indicators, and special test equipment.


• Set up and adjust gages using required equipment or masters per specification requirements. This includes periodic verification of gage set-up.


• Verify accuracy of gaging when required by utilizing calibration history, Gage R & R studies, and applicable Measurement Uncertainty parameters.


• Develop standard work for the process of gage set-ups, training, minimize gage set-up issues, and reduction of queue time for gages being deployed to the manufacturing area.


• Conduct training on proper use of gages to ensure accurate and effective results as well as expected longevity of the tools.


• Work with quality engineering in the design of new or modified gaging when required and support MSA’s/special gage studies.


• Provide technical support and guidance to certified operators, manufacturing, and other areas in need of assistance on all Inspection gaging related topics.


• Utilize calibration software system to track and record assignment and calibration history of measurement equipment.


• Ensure that all quality requirements are being followed including procedural compliance and communicating all non-compliance issues to the appropriate associates.


• Recognize areas of personal performance which need improvement or cross-training and report such to your direct supervisor at least once per year.


• Communicate and coordinate with other members of the Quality team to ensure that all areas flow efficiently through direct support of gaging activities including service, calibration, repair and replacements.


• Ability to help the manufacturing area in troubleshooting and resolving gage issues.

Qualifications

Desirable Capabilities and Success Factors

• High school diploma or equivalent and 5 years of Inspection and Gaging experience in a mechanical calibration (metrology) environment within a manufacturing facility demonstrating increasing accountability and responsibility.


• Strong application knowledge of calibration and metrology systems (ISO 10012 and ANSI/NCSL Z540-1 Calibration System Requirements) including the development, improving, and approving gaging methodologies and design.


• Qualifications should include general or application knowledge of; quality assurance systems (AS9100 and ISO9001), Geometric dimensioning and tolerancing, blue print interpretation, and process capability analysis (including MSA, GR&R, Cpk, GD&T, DMAIC, First Piece Inspection, Cost of Quality).


• Ability to conduct periodic reviews of CM118 (Calibration Manual) to identify areas for cost-effective improvements to this operational (quality/calibration) system.


• Ability to perform physical calibration of mechanical measuring and test equipment, per established written procedures, and possess the mechanical aptitude to complete these activities.


• Ability to identify, control and maintain all established calibration records; possess sufficient computer operation skills to maintain GAGEtrak (software) calibration system or equivalent.


• Ability to analyze, determine and recommend cost-effective plans for repair or replacement of equipment to support inspection and manufacturing schedules.


• Ability to both identify and set-up appropriate inspection equipment for use by manufacturing personnel.


• Ability to conduct internal calibration audits, annual on-site quality audits of calibration subcontractors and complete all required audit records.


• Ability to use all inspection/test equipment required to determine product acceptance while functioning as a Grade B Inspector or higher.


• Experience working in a lean manufacturing or continuous improvement environment.


• Effective communicator – good written and verbal communication skills including developing, implementing, and maintaining procedures, work instructions, and related forms that support the Quality system.


• Basic math aptitude – decimals, fractions, addition, subtraction


• Working knowledge of engineering part drawings and general understanding of metallurgy; ability to understand the physical and mechanical properties of metals as affected by composition, mechanical working and heat treatments including metal cutting and grinding is desirable.


• Demonstrated proficiency in time and project management


• Ability to lift up to 25 pounds repetitively throughout the shift.


• Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a 'U.S. Person', which includes U.S. citizens, U.S. nationals, U.S. permanent residents, individuals granted asylum in the United States, and refugees in the United States., or who otherwise can qualify for a license that permits them to hold the position.

Benefits

• Medical


• Dental


• Vision and Prescription Drug Coverage


• Spending accounts (HSA, Health Care FSA and Dependent Care FSA)


• Paid Time Off and Holidays


• 401k Retirement Plan with Matching Employer Contributions


• Life and Accidental Death & Dismemberment (AD&D) Insurance


• Paid Leaves


• Tuition Assistance

About Regal Rexnord

Regal Rexnord is a publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company’s electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company’s automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools. The Company’s end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture. Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com.

Equal Employment Opportunity Statement

Regal Rexnord is an Equal Opportunity and Affi All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, pregnancy, age, ancestry, national origin, genetic information, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you’d like to view a copy of the company’s affirmative action plan for protected veterans/individuals with disabilities or policy statement, please email [e-mail]. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail [e-mail]. Equal Employment Opportunity Posters Notification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made. At Regal Rexnord, our business purpose is to create a better tomorrow with sustainable solutions that power, transmit and control motion.

Our Values

Our values frame our culture - a shared understanding of how we think and act relative to our key stakeholders. We center our behaviors, actions and decisions around the following values: Integrity Responsibility Diversity, Engagement & Inclusion Customer Success Innovation with Purpose Continuous Improvement Performance Passion to Win with a Sense of Urgency