Building Automation Controls Technician

Wright State University; Dayton (OH); Hybrid; USD 36,000 - 52,000; Full time

Job summary

Wright State University in Dayton, OH is seeking an HVAC Technician to calibrate, maintain, install and repair building controls and systems. The role focuses on efficient operation and energy reduction across campus facilities.

The position requires a high school diploma or HVAC certification and 3+ years of commercial/industrial HVAC experience; valid driver's license; and ability to read blueprints and interpret technical diagrams. Regular Monday–Friday schedule.

Qualifications

• High school diploma or equivalent plus HVAC cert and 3+ years of commercial/industrial HVAC experience.
• Ability to read blueprints, wiring diagrams, plans, and templates.

Responsibilities

• Calibrates and repairs HVAC control systems and associated equipment.
• Performs routine maintenance on building automation systems.
• Troubleshoots Building Automation Systems and retro-commissioning/HVAC controls.
• Analyzes repair needs and plans parts, labor, and costs.
• Ensures safety and compliance with codes and procedures.

Skills

Blueprint reading

Driver's license

HVAC troubleshooting

Building automation

Energy efficiency

Education

High school diploma + HVAC certificate

Tools

BACNet

Modbus

N2

Job description

Please see Special Instructions for more details.

Work shift is Monday-Friday 7:00 a.m. to 3:30 p.m.

Position Information

Position Information (Default Section)

EEO Statement

Wright State University is an equal opportunity employer.

Faculty Rank or Job Title

Job Category:

Job Category: Classified (non-exempt)

Department

Department Facilities Operations

EEO number:

EEO number: 26C383

Position FTE

100% FTE

Minimum Hourly Rate

Minimum Hourly Rate $ 32.00/hr

Salary Band:

Salary Band: CS 21

Job Summary/Basic Function:

Under general direction; calibrates, maintains, installs, repair and troubleshoots controls and equipment associated with HVAC equipment and control systems. Efficient operation of building systems, reduction in energy consumption and operating costs, and improved life cycle of utilities.

Minimum Qualifications

A high school diploma or equivalent, a certificate from a two-year certified technical/vocational HVAC program, and a minimum of three (3) years of full‑time Commercial/Industrial HVAC experience.; OR a high school diploma or equivalent, and eight (8) years of full‑time Commercial/Industrial HVAC experience. Must possess a good understanding of the occupational hazards and general safety considerations inherent in the trade. Must be able to calculate basic math, including fractions, decimals and percentages. Must be able to read, write and comprehend common vocabulary. May be required to read, interpret and work from blueprints, sketches, wiring diagrams, plans, layouts and/or templates.
Must currently have possessed a valid U.S. driver’s license for at least one year*.
*Employees who operate University vehicles, or as a condition of employment, whose jobs require that they operate University vehicles, or that they operate their personal vehicles on University business, are subject to Wright Way Policy #9210, and must consistently meet the requirements of Risk Management for employees who drive under these circumstances.

Preferred Qualifications

Advanced knowledge of:

• DDC (Direct Digital Controls) programming and troubleshooting
• HVAC systems integration with BAS .

Experience with energy management systems and strategies for improving building efficiency.

Essential Functions and percent of time:

• Performs electronic and mechanical calibration and repair of HVAC pneumatic and DDC control systems. 10%
• Performs routine maintenance on building automation system. Operational Testing, Verification, and Acceptance: Run routine reports to review system operation. 10%
• Utilizes HVAC computerized control systems for troubleshooting and repair work of university facilities or property which require specialized training in a skilled trade; Building Automation Systems and Retro-commissioning/ HVAC Controls. Makes systems changes as necessary. 10%
• Proven experience in the integration of low-voltage building subsystems using various industry protocols, such as BACNet, N2, Modbus, etc 10%
• Analyzes, designs, installs and maintains new or replacement HVAC control equipment and control logic for large complex HVAC Systems. 10%
• Installs, maintains and operates components and equipment such as mechanical, pneumatic, electronic and electrical controls of environmental heating and cooling systems. Troubleshoots and assesses mechanical problems/deficiencies to determine and complete necessary repairs and/or replacements to maximize system efficiencies. 10%
• Installs mechanical, pneumatic, and electronic devices designed to control space temperature, and assesses if devices are operating properly. Adjusts thermostats, manual and automatic valves and mechanical linkage to maintain maximum system efficiency. 10%
• Performs periodic inspections and preventative maintenance of contracted work or installed equipment, accessories and components to assure safety and efficient operation. Initiates corrective action when discrepancies are discovered and complies with technical procedures and codes. 10%
• Required to perform on-the-job planning for completion of projects. Reviews scope of mechanical and electronic projects (including minor construction projects) and estimates part/material needs, other project costs, labor hours, staffing needs, etc., to complete in timely manner and recommends such to management and/or university mechanical engineer. Must be able to read and interpret schematics; wiring diagrams; blueprints; technical publications; and safety codes, practices, and procedures. 10%
• Serve as informational resource to other staff. 4%
• May inspect work performed by contractors to insure conformance to project plans and specifications. 4%
• Assesses, analyzes and recommends new methods and technology for enhances mechanical operations. 2%

Note: This is not an inclusive list of duties and responsibilities.

Essential Functions and percent of time (cont'd):

Non-Essential Functions and percent of time:

Working Conditions

Conditions may require walking, stooping, climbing, pushing, pulling, heavy lifting (less than or equal to 65 pounds), high climbing, bending, working in awkward positions handling equipment and materials. There are conditions, equipment and materials present which require proper handling to ensure safety. Exposure to toxic gas, chemicals, high pressure gases, dangerous machinery, fumes and contact with insulation, dust particles and asbestos, and danger of electrical shock may exist. Includes some heavy lifting, bending, and standing for extended periods of time. Any combination of overtime, shift work, weekend and holiday work may be required. Employees will be required to wear protective clothing and/or respiratory equipment when conditions warrant. Note: If a respirator is required for duties specific to this job, an annual respirator fit test and physical examination will be required.
A Core 4 operator license/certification (Forklift Operator – Aerial Lift – Scissor Lift – Boom Lift – Rough Terrain Fork Lift) is required as part of your employment at the University. The University will provide the certification/training. Failure to obtain said license/certification when provided by the University shall result in separation from the University. In the case of promotion when the license/certification should have been obtained within one year of entry into the position, the affected employee shall be returned to their former bargaining unit position and shall displace the bargaining unit employee holding their former position. If the required license/certification should have been obtained more than one year after entry into the position, the affected employee shall be separated from the University.

OSHA 30-hour certificate/license required within (180) days. Failure to obtain said license/certification when provided by the University shall result in separation from the University. In the case of promotion when the license/certification should have been obtained within one year of entry into the position, the affected employee shall be returned to their former bargaining unit position and shall displace the bargaining unit employee holding their former position. If the required license/certification should have been obtained more than one year after entry into the position, the affected employee shall be separated from the University.

Any combination of overtime, shift work, weekend and holiday work may be required.
This position may be designated as essential and/or the employee may be required to provide a means to be contacted during non-duty hours for emergencies.
WSU Testing/Examinations required. A pre-employment physical examination may be required before original appointment. An annual physical exam may be required.
Normal work schedule: Monday-Friday 7:00 a.m. to 3:30 p.m.

To preserve the safety and security of the campus community and to maintain the integrity of university operations, it is the policy of Wright State University making an employment offer contingent on various background checks, such as a criminal record, credit history when job related and/or education verifications. Additionally, an administrative review shall be conducted whenever the university learns that an employee is charged with or convicted of a crime (except for minor vehicle violations). Frequently asked questions related to background checks may be found on the Human resources website at http://www.wright.edu/human-resources .

Effective July 1, 2017, per Policy 7230 Wright State University is tobacco-free. Tobacco use, including the sale, advertising sampling and distribution of tobacco products and tobacco related items is prohibited in all university facilities, on all university owned or leased grounds, university owned or operated residence halls and apartments, and at all university sponsored events regardless of location. Tobacco use is also prohibited in all university vehicles or on any equipment owned, leased or operated by Wright State University. This policy applies to anyone on campus including students, faculty, staff, visitors, consultants, vendors, patients, volunteers, and contractor employees.

Special Instructions to Applicants

Work shift is Monday-Friday 7:00 a.m. to 3:30 p.m.

Posting Date

Posting Date 09/03/2026

First Consideration Date:

First Consideration Date: 09/10/2026

Closing Date

Open Until Filled Yes

Supplemental Questions

Required fields are indicated with an asterisk (*).

• * Do you have a high school diploma or equivalent, a certificate from a two-year certified technical/vocational HVAC program, and a minimum of three (3) years of full-time Commercial/Industrial HVAC experience; OR a high school diploma or equivalent, and eight (8) years of full-time Commercial/Industrial HVAC experience?
  • Yes
  • No
• * Can you read, interpret and work from blueprints, sketches, wiring diagrams, plans, layout and/or templates?
  • Yes
  • No
• * Do you have a valid drivers license?
  • Yes
  • No
• * How did you hear about this position at Wright State University? Please check all that apply.
  • WSU Careers website
  • Academic Careers
  • Academic Keys
  • Chronicle
  • Diversity in Higher Ed
  • Diverse Issues in Higher Ed
  • Facebook
  • HBCU
  • Higher Ed Jobs
  • Inside Higher Ed
  • LinkedIn
  • Social Media
  • Personal referral
  • Women in Higher Ed
  • Other
  • Job Fair or Hiring Event

3640 Colonel Glenn Hwy., Dayton, OH 45435 USA