Arc Air Operator - 2nd Shift

MetalTek International; Joachim Township (MO); On-site; USD 19,000 - 33,000; Full time

Job summary

MetalTek International in Missouri is seeking a hardworking manufacturing team member to prepare castings for finishing. You will remove gates, risers, and excess metal using standard procedures and operate overhead cranes to move castings from arc booths.

You must complete time sheets, identify returns for Melt & Pour, and maintain a clean, safe work area. Equal opportunity employer, including veterans and individuals with disabilities.

Qualifications

• Remove gating, risers, and excess metal (fins feedpads) from castings per standard procedures.
• Properly identify all returns and send to charging floor.
• Use overhead bridge cranes to set up and remove castings from arc booth.
• Perform housekeeping to keep work area clean and safe.
• Weekly cut up customer returns, purchased scrap and internal scrap for Melt & Pour identification.
• Obtain poured weights on castings identified as samples if not already done by Sample Layout personnel.
• Complete time sheets to accurately record how time is spent during shift.
• Remove all sleeves and sand from casting.
• Perform other duties as required by supervisor.

Responsibilities

• Remove gating, risers, and excess metal from castings per procedures.
• Identify returns and route to charging floor.
• Operate overhead cranes to move castings from arc booth.
• Maintain clean and safe work area through housekeeping.
• Handle and identify scraps for Melt & Pour on a weekly basis.
• Record poured weights for sample castings.
• Accurately complete time sheets for shift activity.
• Remove sleeves and sand from castings.
• Perform other duties as assigned by supervisor.

Job description

Description

Using Carbon Arc - Gouging, Remove all excess metals material, gating, risers, and flash as close to casting surface as possible without causing damage to casting in preparation for further processing in Finishing Area.

Requirements

• Remove all gating, risers, and excess metal (fins feedpads) from castings per standard operational procedures.
• Properly identify all returns and send to charging floor.
• Use overhead bridge cranes to set up and remove castings from arc booth.
• Perform housekeeping functions as needed to keep work area clean and safe.
• Weekly cut up customer returns, purchased scrap and internal scrap. Properly identify for Melt & Pour.
• Obtain poured weights on castings identified as samples if not already done by Sample Layout personnel.
• Complete time sheets as required to accurately record how time is spent during shift.
• Remove all sleeves and sand from casting.
• Perform other duties as required and/or assigned by your supervisor.

Equal Opportunity Employer, including Veterans and Individuals with Disabilities

Drug Free Workplace