Aircraft Placard & Part Making Tech

Aviation Technology Associates, LLC; Savannah (GA); On-site; USD 29,000 - 41,000; Full time

Benefits offered by this job

Medical premium assistance

8 paid holidays

Per diem split (qualified)

3 sets of uniforms

Opportunity for direct hire after 90–d

401(k) with matching

Job summary

Aviation Technology Associates (AVTECH Global) seeks an Aircraft Placard & Part Making Tech in Savannah, GA for a full-time 12-month contract with potential extension. Compensation ranges from $21.21 to $29.50 per hour depending on experience and location, with benefits and potential direct-hire after 90 days.

Responsibilities include reading specifications, creating placards and masks using Illustrator and Gerber Omega, and ensuring traceability and FAA compliance while supporting process

Qualifications

• High School diploma or GED required.
• 1–4 years of reading/interpreting engineering drawings for placards, ID plates, spray masks and wire stamping.
• FAA/inspection compliance documentation experience beneficial.

Responsibilities

• Read and interpret customer specs and drawings to determine color, font, dimensions, and materials for placards and masks.
• Use Adobe Illustrator, PDF files and Gerber Omega to draw, layout, and produce placards.
• Maintain documentation and traceability of materials used during manufacturing to ensure compliance with inspection and FAA requirements.
• Operate sign cutting equipment to produce masking for exterior markings on aircraft.
• Contribute to process improvements using lean principles to improve safety and reduce cost.

Skills

Reading drawings

Interpreting specs

Safety compliance

Lean Six Sigma knowledge

Education

High School diploma/GED

Tools

Adobe Illustrator

Gerber Omega

Sign cutting equipment

Job description

Aviation Technology Associates (AVTECH Global) is looking for an Aircraft Placard & Part Making Tech.

Pay Rate: $21.21 to $29.50 per hour (depending on experience, location, etc.)

Job Type: Full-time, Contract

Contract Duration: 12 months (w/opportunity for extension)

Benefits

• coverage of up to one-half of employee's medical insurance premium for a base plan
• eight (8) paid holidays
• per diem split (if qualified)
• three (3) sets of uniforms (if applicable)
• opportunity to become a direct hire after ninety (90) days
• 401(k) with matching
  

Experience/Education

• High School diploma/GED.
• Experience requirement ranges from one (1) year to four (4) years of experience with reading and interpreting engineering drawings and specifications that are specific to producing placards, ID plates, spray masks and wire stamping.

Unique Skills

• Valid driver's license may be required.
• Participation in a DOT/FAA drug and alcohol program may be required.

Purpose

Create and produce placards, identification plates, & vinyl spray painting masks; perform wire stamping and may include final placard installation. May assist engineering in defining placard specifications and by creating graphics and descriptions that engineering can directly use in the engineering placard specification documents.

Level I Essential Functions and Responsibilities

• Required to read and interpret completions customer specifications and engineering drawings / specifications to determine the proper color, font, dimension, and materials required to create and install aircraft placards or identification plates, and to create spray masking, as well as perform wire stamping.
• Use Adobe Illustrator, PDF files and Gerber Omega software to accurately draw, layout, and produce aircraft placards. Additional software or machine operating systems may become required as equipment needs dictate.
• Use sign cutting equipment to produce masking per exterior markings drawings requirements for exterior paint application on aircraft.
• Produce placards that require foreign languages to meet foreign aircraft registration requirements.
• Maintain proper documentation of all work to include traceability of materials used during manufacturing to ensure compliance with all inspection and FAA requirements.
• Use precision tools to verify fabricated placards and identification plates meet all engineering requirements which may include installation.
• Operating Equipment Categories:
  • Category 1: Programmable Gerber or other foil printer.
  • Category 2: Programmable sign cutting equipment, Programmable engraver.
  • Category 3: Miscellaneous equipment: Wire stamper, Inkjet printer, etc.
• Performs daily maintenance on equipment used.
• Complies with all standard operating procedures as well as safety and housekeeping policies.
• Adapts to sudden changes in schedule and priorities.
• Contributes to developing and implementing process improvements that improve safety and reduce cost using lean Six Sigma and other process improvement techniques.
• Monitors and maintains department materials inventory.
• Monitors aircraft schedules to support materials requirement.

Level II Essential Functions and Responsibilities

• Required to read and interpret Completions customer specifications and engineering drawings / specifications to determine the proper color, font, dimension, and materials required to create and install aircraft placards or identification plates, and to create spray masking, as well as perform wire stamping.
• Use Adobe Illustrator, pdf files and Gerber Omega software to accurately draw, layout, and produce aircraft placards. Additional software or machine operating systems may become required as equipment needs dictate.
• Use sign cutting equipment to produce masking per Exterior Markings Drawings requirements for exterior paint application on aircraft.
• Produce placards that require foreign languages to meet foreign aircraft registration requirements.
• Maintain proper documentation of all work to include traceability of materials used during manufacturing to ensure compliance with all inspection and FAA requirements.
• Use precision tools to verify fabricated placards and identification plates meet all engineering requirements which may include installation.
• Operating Equipment Categories:
  • Category 1: Programmable Gerber or other foil printer.
  • Category 2: Programmable sign cutting equipment, Programmable engraver.
  • Category 3: Miscellaneous equipment: Wire stamper, Inkjet printer, etc.
• Performs daily maintenance on equipment used.
• Complies with all standard operating procedures as well as safety and housekeeping policies.
• Adapts to sudden changes in schedule and priorities.
• Contributes to developing and implementing process improvements that improve safety and reduce cost using Lean Six Sigma and other process improvement techniques.
• Monitors and maintains department materials inventory.
• Monitors aircraft schedules to support materials requirement.

Level IV (i.e., Sr) Essential Functions and Responsibilities

• Assists engineering in defining placard specifications and by creating graphics and descriptions that engineering can directly use in the engineering placard specification documents.
• Coordinates operations and support with outside departments to include off site departments as required.
• Assists and trains lower-level technicians.
• Required to read and interpret Completions customer specifications and engineering drawings / specifications to determine the proper color, font, dimension, and materials required to create and install aircraft placards or identification plates, and to create spray masking, as well as perform wire stamping.
• Use Adobe Illustrator, pdf files and Gerber Omega software to accurately draw, layout, and produce aircraft placards. Additional software or machine operating systems may become required as equipment needs dictate.
• Use sign cutting equipment to produce masking per Exterior Markings Drawings requirements for exterior paint application on aircraft.
• Produce placards that require foreign languages to meet foreign aircraft registration requirements.
• Maintain proper documentation of all work to include traceability of materials used during manufacturing to ensure compliance with all inspection and FAA requirements.
• Use precision tools to verify fabricated placards and identification plates meet all engineering requirements which may include installation.
• Operating Equipment Categories:
  • Category 1: Programmable Gerber or other foil printer.
  • Category 2: Programmable sign cutting equipment, Programmable engraver.
  • Category 3: Miscellaneous equipment: Wire stamper, Inkjet printer, etc.
• Performs daily maintenance on equipment used.
• Complies with all standard operating procedures as well as safety and housekeeping policies.
• Adapts to sudden changes in schedule and priorities.
• Contributes to developing and implementing process improvements that improve safety and reduce cost using Lean Six Sigma and other process improvement techniques.
• Monitors and maintains department materials inventory.
• Monitors aircraft schedules to support materials requirement.

Other Requirements

• Possess a working knowledge of policies and procedures manual, inspection procedures manual, and pertinent process specifications.
• Must be able to read, write, speak, and understand the English language.
• Performs other duties as assigned.