AerospaceAircraft Interior Installation Tech

AVTECH Global; Savannah (GA); On-site; USD 32,000 - 47,000; Full time

Benefits offered by this job

coverage of up to one-half of employee

medical insurance premium for a base 5

eight (8) paid holidays

per diem split (if qualified)

three (3) sets of uniforms (if applic

Job summary

AVTECH Global seeks an Aircraft Interior Installation Tech in Savannah, GA for a full-time, contract role lasting 12 months with potential extension.

The position involves removing and installing aircraft interiors, following procedures, and working with FAA paperwork. Requires a high school diploma or GED, and may require a valid driver's license and DOT/FAA drug program participation. 90-day direct-hire potential.

Qualifications

• High School diploma/GED.
• Experience requirement ranges from entry level with applicable installation, fabrication or related experience or trade school preferred to four (4) years of applicable installation, fabrication or related experience.
• Valid driver's license may be required.
• Participation in a DOT/FAA drug and alcohol program may be required.

Responsibilities

• Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (galleys, closet, lavatories, side ledges, bulkheads, doors and vanity ledge fill panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications.
• Use the material tracking system to create parts demand, track squawks and to sign off paperwork.
• Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools.
• Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required.

Education

High School diploma/GED.

Job description

Aviation Technology Associates (AVTECH Global) is looking for an Aircraft Interior Installation Tech.

Pay Rate: $23.32 to $33.81 per hour (depending on experience, location, etc.)

Job Type: Full-time, Contract

Contract Duration: 12 months (w/opportunity for extension)

Benefits:

• coverage of up to one-half of employee's medical insurance premium for a base plan
• eight (8) paid holidays
• per diem split (if qualified)
• three (3) sets of uniforms (if applicable)
• opportunity to become a direct hire after ninety (90) days

Experience/Education:

• High School diploma/GED.
• Experience requirement ranges from entry level with applicable installation, fabrication or related experience or trade school preferred to four (4) years of applicable installation, fabrication or related experience.

Unique Skills:

• Valid driver's license may be required.
• Participation in a DOT/FAA drug and alcohol program may be required.

Purpose:

Removes and installs and/or fabricates aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories by using company operating procedures and quality standards.

Level I Essential Functions and Responsibilities:

• Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (galleys, closet, lavatories, side ledges, bulkheads, doors and vanity ledge fill panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. Specific fit and installation tasks are to be completed in compliance with work order instructions and specifications.
• Use the material tracking system to create parts demand, track squawks and to sign off paperwork.
• Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools.
• Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk.
• Able to climb ladders and stairs, work in small, restricted areas, and lift up to 40 pounds.
• Must be computer literate.

Level II Essential Functions and Responsibilities:

• Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (galleys, closet, lavatories, side ledges, bulkheads, doors and vanity ledge fill panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. Specific fit and installation tasks are to be completed in compliance with work order instructions and specifications.
• Use the material tracking system to create parts demand, track squawks and to sign off paperwork.
• Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools.
• Prepare and install aircraft interior items in accordance with company operation procedures and quality standards.
• Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations.
• Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk.
• Assist technicians, under supervision, with aircraft maintenance requirements.
• Adapt to sudden schedule changes.
• Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques.
• Make and use simple patterns for own use employing standardized procedures.
• Ability to read and interpret blueprints and engineering documentation.
• Ability to use hand/power tools and equipment associated with installation and removal of interiors.
• Able to climb ladders and stairs, work in small, restricted areas, lift up to 40 pounds and work any shift.
• Must be computer literate.
• Excellent communication skills, both verbal and written.

Level IV (i.e., Sr) Essential Functions and Responsibilities:

• Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels).
• Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications.
• Mentor and train other Interior Installation Technicians. Review their work prior to sign off to ensure work complies with quality control standards.
• Accept lead responsibilities as required. Oversee projects or other technicians and assess requirements of assigned tasks to procure required materials and documentation for assigned tasks.
• Utilize the material tracking system to create parts demand, track squawks and to sign-off work.
• Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools.
• Prepare and install aircraft interior items in accordance with company operation procedures and quality standards.
• Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations.
• Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk.
• Assist technicians with aircraft maintenance requirements.
• Adapt to sudden schedule changes and coordinate projects with other shops/departments as required.
• Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques.
• Make and use simple patterns for own use employing standardized procedures.
• Ability to read and interpret blueprints and engineering documentation.
• Ability to use hand/power tools and equipment associated with installation and removal of interiors.
• Able to climb ladders and stairs, work in small, restricted areas, lift up to 40 pounds and work any shift.
• Must be computer literate.
• Excellent communication skills, both verbal and written.
• Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc.

Other Requirements:

• In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
• Must be able to read, write, speak, and understand the English language.
• Performs other duties as assigned.