Aerospace NDT Helper - Swing Shift

Precision Castparts Corp.; Kent (WA); Vor Ort; USD 23.000 - 32.000; Vollzeit

Benefits dieser Stelle

Quarterly cash bonus

Paid time off

Holiday pay

Insurance

401(k)

Zusammenfassung

Precision Castparts Corp. in Kent, WA is seeking entry-level Trainee for the NDT department to learn non-inspection support tasks and gain on-the-job training toward becoming an NDT Inspector.

Trainees work under Level II/III supervision, performing racking, masking, cleaning and documentation while adhering to safety and quality standards. Candidates should be self-disciplined, detail-oriented, and able to adapt in a fast-paced production environment.

Qualifikationen

• Must be able to read and follow written procedures.
• No prior NDT experience required; training provided.
• Good communication and reliability.

Aufgaben

• Review work instructions for racking, cleaning, masking.
• Perform receiving inspections as needed.
• Gathers supplies (racks, tooling, baskets, carts).
• Masking and racking of production parts.
• Maintain clean work area and follow safety policies.
• Complete documentation and package parts.

Kenntnisse

English literacy

Lifting 35 lbs

Team player

Attention to detail

Ausbildung

General education

Jobbeschreibung

Located in Kent Washington, Protective Coatings Inc. is a leading provider of full service finishing for the aerospace, electronics and medical industries in both commercial and defense applications. Services include but is not limited to non-destructive testing such as fluorescent penetrant and magnetic particle inspection and a wide variety of surface enhancement processes such as shot peening and abrasive blasting, passivation, cadmium and nickel zinc plating, chromic, sulfuric and boric sulfuric acid anodizing and the application of chromate conversion coating on ferrous and non-ferrous alloys. Organic coating includes the application and testing of multiple resin systems such as epoxies, phenolics, polyurethanes, polyesters, elastomerics, intumescents, lacquers, alkyds, acrylics, dry-film lubricants, and Teflon. Current approvals include the National Aerospace and Defense Contractors Accreditation Program, (NADCAP), Boeing Commercial Aircraft Company, Boeing Defense and Space, Boeing/Philadelphia, Boeing Long Beach, Grumman, Gulfstream, Lockheed Martin, Goodrich, Bombardier, Cessna and Sikorsky among much else.

Founded in 1976, Protective Coatings Inc. was later acquired by Precision Castparts in 2012, and became part of the Aerostructures Division.

Position Summary:

Selected candidates for this entry level position will learn tasks that support non-inspection functions in the NDT department, with an opportunity of on-the-job training to begin a career as an NDT Inspector. A person choosing this opportunity performing work in the NDT process or assisting NDT personnel who is not yet qualified to any level is considered a “trainee”. A trainee works under the direct supervision of a Level II or Level III and may not independently conduct or document tests. Candidates must be s elf-disciplined and self-motivated individuals with strong accountability (attention to details) skills. Candidates must have the ability and desire to be flexible and adaptable in a fast-paced production environment, be resourceful and innovative along with presenting a strong business ethic and compliance to leadership and company policies, and a good communicator with the ability to represent the company in a positive manner. Selected candidates will be expected to perform a variety of tasks which include but are not limited to racking, masking, and cleaning of production aerospace parts.

Primary Duties & Responsibilities:

• Reviewing and assimilating work instructions relating to racking, cleaning and masking operations.
• Perform receiving inspections (before processing) as needed and immediately report any damage or discrepancy.
• Gathers supplies such as racks, tooling, baskets, carts (etc)
• Masking of production parts to protect certain surfaces from cleaning and inspecting operations.
• Racking of production parts for cleaning and inspecting operations
• Cleaning of production parts which include degreasing or manual solvent cleaning
• Will require use of personal protective equipment (PPE) during certain tasks (goggles, safety glasses, aprons, boots, gloves, hearing protection, etc) and be expected to comply with safety directives and policy.
• Will be exposed to chemicals/solvents and occasional fumes, wet/humid conditions, low-level lighting, and moderate noise level.
• Will at times require heavy lifting or use of mechanical hoist for the aid in lifting objects
• Work closely with inspectors and area leadership to complete work and prioritize tasks
• Clean, organize and maintain work area as prescribed by supervision
• Complete documentation, counting of production parts, computer scanning, package to protect and transport, and other assigned tasks.

Required Skills:

• Basic mathematic skills: add, subtract, multiply and divide using whole numbers, common fractions and decimals.
• Ability to stand for prolonged periods with limited movement.
• Ability to work alone or as a member of a team, good cooperative skills.
• Ability to read, write and communicate in English. Specifically, applicants must be able to read and understand written procedures and instructions.
• Ability to lift and carry up to 35 lbs.
• Demonstrated ability to work effectively in a fast paced and ever-changing environment with multiple priorities.

Required Experience:

• None

Level of Education:

• General Standard education including the ability to read and write in English.

Shift:

• Monday through Friday from 2pm to 10:30pm. Must be able to train on day shift for 30 days.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

For informational purposes only, the range of pay for this role is $20 to $20 US Dollar (USD) Hourly based on a variety of factors. For informational purposes only, this role is eligible to participate in the Company’s Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company’s bonus multiple, based on the Company’s performance in the applicable quarter . Employees will receive 120 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company’s 401(k) plan.

This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.

Company Profile

With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability – not just in the materials and products we make, but in the people we recruit.

PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.

In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.

We are constantly searching for the best talent and offer excellent development programs for recent graduates as well as meaningful work experience for those still studying.