Aerospace NAS410 NDT Inspector (Mag & Pen) - 2nd Shift

Hytek Finishes Co.; Kent (WA); Sur place; USD 30 000 - 45 000; Plein temps

Avantages offerts par ce poste

Medical, Dental, Vision

401(k) matching

Profit Sharing

Paid time off

Tuition reimbursement

Parental leave

Disability insurance

Life insurance

Holidays

Onsite health services

Résumé du poste

Hytek Finishes Co. is seeking an Aerospace NDT Inspector Trainee on 2nd shift in Kent, WA. You will become certified in Magnetic Particle, Liquid Penetrant, and Nital Etch per NAS410 under supervision and training programs.

Position requires NAS410 Level II certification in MP/FP, on-site work, and participation in FAA Drug & Alcohol Testing. Benefits include health, 401(k), and life insurance. Training hours and OJT provided.

Qualifications

• Must have NAS410 Level II certification in Fluorescent Magnetic Particle and Fluorescent Liquid Penetrant.
• OJT hours documented; NDT training program participation.
• FAA DOT Drug & Alcohol Testing Program participation required.

Responsabilités

• Assist NDT Level III to complete tasks and prioritize work.
• Follow inspection techniques and customer orders; ensure Operator Self Verification is complete.
• Review paperwork and verify previous operations with QA; notify supervisor if issues.
• Prepare parts for operations; use proper tooling and fixtures.
• Understand QA requirements and rework procedures; follow drawings and notations.
• Contribute to process improvements and cross-train where needed.

Connaissances

NAS410 Level II-?

Teamwork

Attention to detail

English literacy

Problem solving

Lean tools

FAA Drug & Alcohol program compliance

Attendance reliability

Read/Write/Communicate in English

U.S. work authorization

Formation

NAS410 Level II certification (Fluent MP & FP)

NDT certifications in Magnetic Particle and Penetrant

Description du poste

Aerospace NAS410 NDT Inspector (Mag & Pen) - 2nd Shift

Job Overview

Title: Aerospace Non-Destructive Testing (NDT) Inspector - 2nd Shift

Reports to: Shift Supervisor or Value Stream Manager

Location: Kent, WA - onsite

Type: Non-Exempt, Full-Time

Schedule Type: 2nd Shift, Training on1st Shift

Hytek production is open 24 hours per day. Normal Shifts are as follows: 1st shift (Monday - Friday, 6:00 a.m. - 2:30 p.m.), 2nd shift (Monday - Friday, 2:00 p.m. - 10:30 p.m.), 3rd shift (Sunday - Friday, 10:00 p.m. - 6:30 a.m.)

** Applicants must provide a copy of their NAS-410 Level II Certificate(s) in Magnetic Particle and/or Liquid Penetrant. This would also include all employer provided On-the-Job (OJT) hours upon submission of our qualification process.

Full benefits package includes: Medical, Dental, Vision, 401(k) matching, Performance Share incentive compensation (Profit Sharing Plan), 3-weeks paid time off to start, paid community service day, tuition reimbursement, parental leave, short term disability, long term disability, life insurance, long-term care plan options, 10 paid holidays, and onsite health services that includes access to a massage therapist.

Salary Range for position: $ 21.80 - $ 32.80. The pay range and total compensation package listed above is the expected pay offered for this position at the start of employment. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees. Hytek is committed to fair, unbiased compensation along with competitive benefits.

Position Summary

This is an Inspector trainee position in our Non-Destructive Testing (NDT) department. Employees in this position will become certified as an NDT Inspector. The individual in this role will be considered an Inspector Trainee until certified by the Level III NDT Responsible in each of the three disciplines of NDT Inspection performed at Hytek (Magnetic Particle, Liquid Fluorescent Penetrant, and Nital Etch) and are able to perform the work independently. On the job training, as well as study time is granted to all Inspector Trainees. All NDT Inspectors are required to join the Federal Aviation Administration (FAA) DOT Drug & Alcohol Testing Program*. NDT Inspectors perform operations in accordance with Military and OEM specifications.

* FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Why Join Us?

• Opportunity to develop your technical skills in a hands-on environment.
• Supportive team culture focused on safety and development.
• Competitive pay and benefits.

Key Responsibilities

• Work closely with experienced Inspectors and NDT Level III Responsible to complete work and prioritize tasks.
• Follow technique card, customer Purchase Orders, and instructions from experienced NDT Inspectors; and Operator Self Verification inspection has occurred.
• General review of paperwork and Operator Self Verification inspection of job to ensure all previous operations were completed. Notify supervisor and Quality Assurance if any errors.
• Prepare parts prior to operations; use proper tooling and fixtures, when applicable.
• Familiar with Quality Assurance requirements & rework procedures.
• Familiar with engineering drawing notations.
• Develop new product processing and identify areas for improvement.
• Actively participate in continuous improvement activities to drive positive change in productivity, delivery, and service.
• Work and coordinate with other departments in order to meet customer demand.
• Other duties as assigned, including cross-training in other Production areas as work flow demands.

Qualifications

• Ability to pass Written and Practical examinations prior to Hytek certifications. All Trainees are required to become NDT Certified Inspectors through Hytek’s training program.
• Demonstrated ability to train and positively influence others.
• Must be a self-starter, able to work both independently, as a team, and with customers (both internally and externally).
• Excellent accuracy with a strong attention to detail.
• Ability to solve tactical and strategic problems and issues arising in this position.
• Ability to use/learn Lean Tools and techniques to solve tactical and strategic problems and issues arising in this position.
• Required to join the Federal Aviation Administration (FAA) DOT Drug & Alcohol Testing Program and pass an initial and annual Industrial Eye Exam.
• Must have a regular and dependable attendance record.
• Ability to Read/Write/Communicate in English.
• Must be able authorized to work in the U.S. An export license will be required to work in all areas of the facility.

Education & Experience

• 1-2 years in manufacturing environment a plus.
• Candidates must have previous NAS410 Level II certification in Fluorescent Magnetic Particle (Stationary Horizontal Wet Bench) and Fluorescent Liquid Penetrant (Methods A&B) in the Aerospace Industry, including well-documented OJT training hours. (Candidates May still apply IF they have completed one Level II area such as Magnetic Particle or Liquid Pen and can show OJT hours).
• In process of NDT certifications for Magnetic Particle, Penetrant Inspection

Essential Mental/Physical Demands

• Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
• Ability to carry 63 lbs. occasionally
• Ability to push/pull 59 lbs. occasionally
• Ability to stand and walk frequently
• Ability to sit occasionally
• Ability to reach from the shoulder and overhead occasionally and from the waist frequently
• Ability to bend, stoop, squat, crouch, kneel, crawl occasionally
• Ability to climb stairs and ladders occasionally
• Ability to push/pull frequently
• Ability to pivot, twist, pinch occasionally
• Ability to grasp frequently
• Ability to see/hear/feel constantly – hearing protection required when working in the area

Work Environment:

• Hearing protection required in certain areas.
• Occasional exposure to moving mechanical parts, fumes, airborne particles, and chemicals.
• Temperature fluctuations based on outdoor conditions.
• PPE required: safety glasses/goggles, aprons, rubber boots, gloves, respirator (provided by company).

Hytek Finishes is an equal opportunity employer. It is Hytek’s policy to make all employment decisions without regard to an individual’s sex, gender (including pregnancy, childbirth, breast feeding, and related conditions), sexual orientation, gender identity, gender expression, race (including traits historically associated with race, including hair texture and protective hairstyles such as braids, locks and twists), creed, religion (including religious dress and grooming), color, national origin, ancestry (including association, affiliation, or participation with persons or activities related to national origin, English-proficiency or accent or immigration status), physical or mental disability, medical condition, genetic information, marital or domestic partner status, age, veteran or military status, and any other categories protected by applicable state, local, or federal law. M/F/Disability/Protected Vet.

Department: NDT-011240

This is a non-management position

This is a full time position