Turbomachinery Engineer

Kepler

Düzce Merkez

On-site

TRY 350,000 - 650,000

Full time

5 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Kepler Aviation in Türkiye seeks a turbomachinery design engineer to work on centrifugal compressors, diffusers, turbine stages and the rotor spool. You will design, analyse and test components, turning data into validated performance maps.

The role covers 1D sizing, 2D/3D blade passage design, CFD (ANSYS/Star-CCM+), rotordynamics, FEA, and turbine thermal management. Based in Düzce or willing to relocate, you will collaborate with cross‑functional teams and support commissioning of the turbojet

Qualifications

  • Bachelor's degree in Aerospace or Mechanical Engineering with turbomachinery specialization.
  • Background in gas turbine architecture and compressor/turbine design.
  • Experience with 3D CFD for turbomachinery using ANSYS CFX/Fluent or Star-CCM+.
  • Familiar with blade design tools and CAD/FEA: MULTALL, AxSTREAM, BladeGen, TurboGrid, Siemens NX, ANSYS Mechanical.
  • Proficiency in Python, MATLAB or FORTRAN for analysis and scripting.
  • Experience with high-speed rotor balancing and turbine testing is a plus.

Responsibilities

  • Perform 1D meanline sizing and cycle matching for turbomachinery components.
  • Design 2D/3D blade passages for centrifugal compressors and turbine stages.
  • Optimize diffusers, crossovers, and turbine nozzles for efficiency and surge margins.
  • Run 3D RANS CFD and assess pressure ratios and losses.
  • Carry out rotordynamic analysis and bearing loads at high speeds.
  • Balance rotors to tight vibration limits and perform FEA on impellers.
  • Analyse turbine cooling and thermal management for performance maps.
  • Integrate spool with combustor liner, fuel nozzles and lubrication
  • Support commissioning and testing on turbojet test bench and derive data-driven maps.

Education

Bachelor's degree in Aerospace or Mechanical Engineering with a specialisation in turbomachinery, gas turbines or propulsion
Fluent English reading and writing

Tools

ANSYS CFX
Fluent English
Star-CCM+
MULTALL
AxSTREAM
BladeGen
TurboGrid
Siemens NX
ANSYS Mechanical
Python
MATLAB

Job description

Kepler Aviation develops micro turbojet engines in Düzce, Türkiye. This role covers the rotating heart of the engine: centrifugal compressor, diffuser, turbine stage and the spool that carries them. You will design it, analyse it, balance it, put it on the test bench and prove it with data.

What You Will Do
  • Perform 1D meanline sizing, thermodynamic cycle matching and 2D/3D blade passage design for centrifugal compressors and axial or radial turbine stages
  • Design and optimise vaned and vaneless diffusers, crossover passages and turbine nozzles for total-to-total efficiency and wide surge and stall margins across the operating speed range
  • Run 3D RANS CFD of compressible turbomachinery flow (ANSYS CFX, Fluent or Star-CCM+): pressure ratio, separation, total pressure losses
  • Carry out rotordynamic analysis: critical speeds, Campbell diagrams, lateral and torsional stability, bearing loads at very high shaft speeds
  • Perform precision dynamic balancing of impellers, shafts, turbine wheels and the assembled rotor to strict vibration limits
  • Run structural, centrifugal stress, thermal and high-cycle fatigue FEA on impellers and turbine blisks (ANSYS Mechanical, Siemens NX)
  • Analyse turbine thermal management, including cooling passages and loss reduction on turbine vanes
  • Integrate the spool with the combustor liner, fuel nozzles and bearing lubrication and cooling circuits
  • Support commissioning and testing on the turbojet test bench, and turn vibration, pressure, temperature and speed data into validated performance maps
Requirements
  • Bachelor's degree in Aerospace or Mechanical Engineering with a specialisation in turbomachinery, gas turbines or propulsion
  • Proven background in gas turbine architecture, centrifugal compressor performance maps and turbine stage design
  • 3D compressible CFD for turbomachinery: ANSYS CFX, Fluent or Star-CCM+
  • Blade design and sizing tools: MULTALL, AxSTREAM, ANSYS Vista CCD, BladeGen or TurboGrid
  • CAD and FEA: Siemens NX, ANSYS Mechanical
  • Python, MATLAB or FORTRAN for cycle analysis, data processing and performance scripts
  • Hands-on experience with dynamic balancing of high-speed rotating assemblies and bearing selection, for example hybrid ceramic angular contact bearings
  • Experience with turbine cascade testing, film cooling analysis or gas turbine test bench operation
  • Fluent technical English, reading and writing
  • Based in Düzce or willing to relocate
Preferred
  • Hands-on turbojet hardware experience
  • Peer-reviewed publications in turbomachinery or gas turbines (ASME Turbo Expo, IMECE or similar)
  • Master's degree or PhD in turbomachinery or propulsion
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Turbomachinery Engineer - Gas Turbine Rotor Designer
Turbomachinery Engineer - Gas Turbine Rotor Designer

Kepler • Düzce Merkez

On-site
TRY 350,000 - 650,000
Design Engineer
Design Engineer

TEI - TUSAŞ Engine Industries, Inc. • Kartal

On-site
TRY 30,000 - 60,000
Gas Turbine Engine Assembly / Test Technician
Gas Turbine Engine Assembly / Test Technician

Baykar • Turkey

On-site
TRY 280,000 - 420,000
Engine Technologies - Mechanical Draftsperson
Engine Technologies - Mechanical Draftsperson

Baykar Piaggio Aerospace S.p.A. • Fatih

On-site
TRY 60,000 - 90,000
Piston Engine Test Technician
Piston Engine Test Technician

Baykar • Turkey

On-site
TRY 350,000 - 520,000
Engine Electrical Systems Test and Failure Analysis Engineer
Engine Electrical Systems Test and Failure Analysis Engineer

Baykar • Turkey

On-site
TRY 600,000 - 800,000
Propulsion and Fluid Systems – Engine Technician
Propulsion and Fluid Systems – Engine Technician

Baykar • Fatih

On-site
TRY 180,000 - 260,000
Mechanical Manager-Engineering
Mechanical Manager-Engineering

Çalık Enerji • Fatih

On-site
TRY 900,000 - 1,300,000
Mechanical Design Engineer (CAD)
Mechanical Design Engineer (CAD)

Tulkas Design • Fatih

On-site
TRY 180,000 - 300,000
Technical Support Mechanical Specialist - Rotor Blade
Technical Support Mechanical Specialist - Rotor Blade

ENERCON • Konak

On-site
TRY 2,988,000 - 4,482,000