Senior Cost Analyst (Electronic Manufacturing)

Reolink

Singapore

On-site

SGD 90,000 - 130,000

Full time

2 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

5 work days a week
Medical benefits provided
Yearly bonus & performance bonus

Job summary

Reolink, a leading provider of intelligent visual technology, seeks a Senior Cost Analyst to own end‑to‑end costing for finished goods and subcontractors, including BOM validation, landed cost, and margin reporting. You will partner with Operations, Procurement and Product Engineering to ensure real‑time visibility of manufacturing costs across 16 entities on a NetSuite ERP backbone.

You will maintain standard costs, validate supplier quotations, and monitor landed costs across China, HK and

Qualifications

  • ACCA (part- or fully-qualified) or Diploma in Accounting / Finance; degree holders also welcome.
  • 6–8 years' cost accounting / manufacturing finance experience, with at least 3 years in a hardware / electronics manufacturing or contract manufacturing environment.
  • Direct experience with overseas contract manufacturers and subcontractors is essential.
  • Experience in consumer electronics, IoT hardware, or similar high-mix, short-lifecycle environments is strongly preferred.
  • Experience operating in a multi-entity, multi-currency group (SG / HK / China ideally).

Responsibilities

  • Own end-to-end costing for CM- and subcontractor-manufactured SKUs, including BOM, standard costs, and landed cost.
  • Be the finance partner to Operations, Procurement, and Product Engineering, ensuring real-time visibility of manufacturing cost drivers across 16 entities on NetSuite.
  • Maintain standard costs and cost rolls at BOM/routing level in NetSuite; review cost rolls each cycle.
  • Validate CM/subcontractor quotations against BOM costs, labour rates, and process yields; benchmarks against actuals.
  • Track subcontracting fees, tooling amortisation, and NRE charges; monitor landed costs (FOB, freight, duties) across regions.
  • Conduct monthly variance analyses (PPV, usage, yield) and explain root causes with Operations.
  • Support NPI costing with should-cost modelling and first-article cost validation.
  • Maintain inventory valuation integrity and lead standard costing updates with Supply Chain.
  • Partner on cost-down initiatives, factory consolidation, and transfer pricing documentation.
  • Prepare month-end costing journals and pack cost trends for Group Finance; support budgets and forecasts.

Skills

Cost accounting
Manufacturing finance
Variance analysis
Cross-entity finance

Education

ACCA (part- or fully-qualified) or Diploma in Accounting/Finance

Tools

NetSuite
Excel

Job description

Senior Cost Analyst (Electronic Manufacturing)

Reolink, a leader in intelligent visual technology for homes and businesses, was founded in 2009 by a group of engineers with a strong commitment to and passion for smarter security solutions.
Our products are now trusted by millions of users across more than 110 countries and regions worldwide. Building on this trust, we continue expanding our presence and bringing our innovations to more markets around the globe. Reolink remains committed to delivering advanced, reliable, and user‑centric solutions that empower people to protect what matters most.

5 Work Days Per Week
Medical Benefits Provided
Entitled to Yearly Bonus & Performance Bonus
Role Summary
  • This role owns the full costing lifecycle for finished goods and components sourced from factories and subcontractors — from standard cost build-up and BOM validation through to landed cost, variance analysis, and margin reporting.
  • The successful candidate will be the finance business partner to Operations, Procurement, and Product Engineering, ensuring product costs are accurate, transparent, and defensible, and that the Group has real-time visibility of manufacturing cost drivers across 16 legal entities on a single NetSuite ERP backbone.
Key Responsibilities
Factory & Subcontracting Cost Management
  • Own end-to-end product costing for all CM- and subcontractor-manufactured SKUs, including camera hardware, accessories, and NVR/hub products.
  • Build and maintain standard costs (material, labour, overhead, tooling amortisation) at BOM/routing level in NetSuite; review and approve cost rolls each cycle.
  • Validate CM/subcontractor quotations against BOM cost breakdowns, labour rates, and process yields; challenge quoted costs with fact-based benchmarking.
  • Track and reconcile subcontracting fees, processing charges, tooling/mould amortisation, and NRE (non-recurring engineering) charges billed by factories.
  • Monitor landed cost components — FOB price, freight, duties, insurance — across China, HK, and other sourcing entities.
Variance Analysis & Margin Reporting
  • Perform monthly purchase price variance (PPV), usage variance, and yield/scrap variance analysis by SKU and by factory; investigate and explain root causes with Operations.
  • Analyse standard-vs-actual cost variances arising from engineering changes (ECN), component substitutions, and FX movement on USD/RMB-denominated purchases.
  • Prepare product-level and SKU-level gross margin bridges for management review, highlighting cost trend, mix, and pricing impact.
  • Support new product introduction (NPI) costing — target cost setting, should-cost modelling, and first-article cost validation before mass production.
Inventory & Standard Costing Integrity
  • Maintain integrity of inventory valuation (raw material, WIP, finished goods) across manufacturing and trading entities under group costing policy.
  • Lead periodic standard cost updates / cost roll cycles and coordinate cut-over with Supply Chain to avoid valuation distortions.
  • Review slow-moving / excess & obsolete (E&O) inventory provisioning with Operations and recommend provisioning adjustments.
  • Support physical stock counts and cycle counts at factory / 3PL warehouse locations; reconcile book-to-physical variances.
Business Partnering & Controls
  • Act as finance business partner to Operations, Procurement, and Product Engineering on cost-down initiatives, factory consolidation, and dual-sourcing decisions.
  • Evaluate cost impact of factory transfers, new CM onboarding, and subcontractor contract renegotiations; provide finance sign-off on commercial terms.
  • Design and enforce internal controls over CM/subcontractor billing, tooling asset capitalisation, and consignment inventory arrangements.
  • Support transfer pricing documentation for intercompany manufacturing and processing fee arrangements with the tax/TP team.
Month-End Close & Reporting
  • Prepare costing-related month-end journal entries: cost roll adjustments, PPV/variance postings, tooling amortisation, and provision true-ups.
  • Deliver monthly costing packs to Group Finance covering cost trends, variance summary, and factory scorecards.
  • Support budget and forecast cycles with standard cost assumptions, factory capacity/utilisation inputs, and cost-down targets.
  • Liaise with external auditors on inventory valuation, cost accounting policy, and manufacturing-related audit queries.
KEY REQUIREMENTS
Qualifications & Experience
  • ACCA (part- or fully-qualified) or Diploma in Accounting / Finance; degree holders also welcome.
  • Minimum 6–8 years' relevant experience in cost accounting / manufacturing finance, with at least 3 years in a hardware / electronics manufacturing or contract manufacturing environment.
  • Direct experience working with oversea -based contract manufacturers and subcontractors is essential.
  • Prior exposure to consumer electronics, IoT hardware, or similar high-mix, short-lifecycle product environments is strongly preferred.
  • Experience operating in a multi-entity, multi-currency group structure (SG / HK/ China ideally).
Technical & Systems Skills
  • Strong hands-on experience with ERP-based costing modules; NetSuite experience strongly preferred.
  • Advanced Excel skills (BOM cost modelling, variance analysis, should-cost templates).
  • Working knowledge of BOM/routing structures, engineering change management (ECN), and manufacturing process flows.
  • Familiarity with transfer pricing concepts for intercompany manufacturing/processing arrangements is an advantage.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Cost Controller | Costing Accountant
Cost Controller | Costing Accountant

Reolink • Singapore

On-site
SGD 120,000 - 180,000
Medical Benefits Provided
Yearly Bonus & Performance Bonus
5 Work Days Per Week
Accountant (Project Costing & Financial Analyst)
Accountant (Project Costing & Financial Analyst)

Reolink • Singapore

On-site
SGD 90,000 - 130,000
5 Work Days Per Week
Medical Benefits Provided
Entitled to Yearly Bonus & Performance
Costing Accountant | Group Finance
Costing Accountant | Group Finance

Reolink • Singapore

On-site
SGD 90,000 - 150,000
Medical benefits
5 work days per week
Yearly bonus
Senior Cost Analyst - Electronics Manufacturing
Senior Cost Analyst - Electronics Manufacturing

Reolink • Singapore

On-site
SGD 90,000 - 130,000
5 work days a week
Medical benefits provided
Yearly bonus & performance bonus
Senior Costing & Manufacturing Finance Analyst
Senior Costing & Manufacturing Finance Analyst

Reolink • Singapore

On-site
SGD 90,000 - 130,000
5 Work Days Per Week
Medical Benefits Provided
Entitled to Yearly Bonus & Performance
Manufacturing Cost Analyst (NetSuite & NPI)
Manufacturing Cost Analyst (NetSuite & NPI)

Reolink • Singapore

On-site
SGD 120,000 - 180,000
Medical Benefits Provided
Yearly Bonus & Performance Bonus
5 Work Days Per Week
Accountant (Costing)
Accountant (Costing)

Silith Technology • Singapore

On-site
SGD 65,000 - 95,000
Global Costing Accountant & Finance Partner
Global Costing Accountant & Finance Partner

Reolink • Singapore

On-site
SGD 90,000 - 150,000
Medical benefits
5 work days per week
Yearly bonus
Costing Analyst [Manufacturing | Woodlands]
Costing Analyst [Manufacturing | Woodlands]

Sunningdale Tech Ltd • Singapore

On-site
SGD 40,000 - 70,000
COSTING EXECUTIVE
COSTING EXECUTIVE

XPAC TECHNOLOGIES PTE. LTD. • Singapore

On-site
SGD 40,000 - 70,000