Mold Tooling Engineer/ Designer

FOCAL ENERGY SOLUTIONS PTE. LTD.

Singapore

On-site

SGD 70,000 - 110,000

Full time

12 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

FOCAL ENERGY SOLUTIONS PTE. LTD. is seeking an experienced mold design engineer to design, develop and improve two-plate and three-plate compression molds for EPDM, NBR, HNBR and FKM.

The role involves overseeing fabrication, trials, troubleshooting, and maintenance with close collaboration to in-house engineering and manufacturing teams. You will build design standards, improve manufacturability, and supervise technicians to ensure reliable molding performance across semiconductor-related

Qualifications

  • Experience designing two-plate and three-plate compression molds for EPDM, NBR, HNBR and FKM.
  • Ability to establish cavity arrangement, venting, flash control and demolding.
  • Experience coordinating with toolroom and suppliers for fabrication and inspection.

Responsibilities

  • Review drawings, tolerances and materials to release mold designs.
  • Develop mold concepts and BOMs using SolidWorks/AutoCAD.
  • Coordinate fabrication, revisions, and inspection with internal and external suppliers.
  • Lead mold trials, optimize process, and document results.
  • Plan repairs, maintenance and spare-part strategies for molds.
  • Build design standards and transfer to production.

Skills

Mold design
Tooling troubleshooting
Mold trials planning

Tools

AutoCAD
SolidWorks

Job description

Job description

Design, develop and improve rubber compression mold tooling and the associated molding processes for a precision manufacturing business serving the semiconductor industry. Take technical ownership from mold concept and detailed design through fabrication oversight, trials, troubleshooting, production support, repair and maintenance.

The role focuses on two-plate and three-plate compression molds processing EPDM, NBR, HNBR and FKM, using AutoCAD and SolidWorks. Improve tooling manufacturability, reduce tooling rework, and establish reliable molding performance. Build practical design and process standards, work closely with in-house engineering and manufacturing teams, and supervise technicians.

Detailed job scope
Mold design and engineering
  • Review part drawings, critical dimensions, tolerances, surface requirements, material specifications and production needs; identify feasibility issues before releasing a mold design.
  • Develop two-plate and three-plate compression mold concepts, assemblies, component drawings and bills of materials in SolidWorks and AutoCAD.
  • Define cavity arrangement, parting surfaces, plate alignment, inserts, venting, flash control and demolding arrangements appropriate to the part and compound.
  • Establish and validate shrinkage allowances using compound information, prior production evidence and trial measurements. Record the conditions supporting each allowance.
  • Select suitable tooling materials, heat treatments and surface treatments with manufacturing and suppliers, considering dimensional stability, finish, wear, repairability and cost.
  • Check mold compatibility with the intended press, including usable area, mounting, opening, loading, heating and handling arrangements.
Tooling manufacturability and fabrication oversight
  • Review designs with the toolroom/manufacturing team for machining access, achievable tolerances, inspection access, assembly, fitting and ease of maintenance.
  • Simplify difficult features and standardise reusable components where this improves quality, lead time or cost without compromising requirements.
  • Coordinate internal fabrication and external tooling suppliers: communicate drawings and revisions, resolve technical queries, monitor progress and review inspection results.
  • Investigate tooling nonconformances and repeated machining, fitting or assembly rework; agree corrective actions with the responsible manufacturing team.
  • Maintain controlled design files, revision histories and technical records through fabrication and modification.
Mold trials and molding process development
  • Plan and lead trials with technicians and production personnel; agree sample requirements, inspection methods and acceptance criteria before testing.
  • Establish and refine material charge/preform preparation, loading sequence, mold temperature, pressure, curing time, venting/degas steps where applicable, and demolding conditions.
  • Assess cavity-to-cavity consistency, dimensional results, flash, surface defects and part damage; document trial conditions, findings and required changes.
  • Verify relevant post-cure effects with the responsible materials or process specialist when the compound and application require post-curing.
  • Prepare the technical evidence for tooling acceptance and production handover, including drawings, trial reports and molding setup instructions.
Troubleshooting and yield improvement
  • Diagnose tooling and molding issues such as excessive flash, incomplete filling, trapped air, sticking, dimensional variation, misalignment and premature tool wear.
  • Separate tooling design/fabrication causes from compound variation, press conditions, handling and process settings; use controlled trials and measurement data to confirm causes.
  • Implement and verify design or process changes with engineering, manufacturing and quality personnel.
  • Track tooling fabrication acceptance/rework separately from molded-part acceptance/scrap, so improvements address the correct stage.
  • Improve cycle time, usable cavity output, material utilisation and tool availability while maintaining agreed quality requirements.
Tooling repair and maintenance
  • Assess tool condition and plan repairs, refurbishment, spare inserts and replacement of wear components.
  • Establish mold inspection, cleaning, preservation, storage and preventive-maintenance instructions with technicians and manufacturing.
  • Define checks and repeat trials needed after repairs or modifications before returning a mold to service.
  • Build a practical library of proven designs, trial data, recurring defects and corrective actions.
  • Allocate technician tasks, review workmanship and records, and train technicians in mold handling, assembly, trial execution and defect identification.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Mold Tooling Engineer
Mold Tooling Engineer

ORICUS SEMICON SOLUTIONS PTE. LTD. • Singapore

On-site
SGD 90,000 - 130,000
Rubber Mold Tooling Design Engineer
Rubber Mold Tooling Design Engineer

The Supreme HR Advisory Pte Ltd • Singapore

On-site
SGD 45,000 - 56,000
6723 - Rubber Mold Tooling Design Engineer [Joo Koon | up to $5000]
6723 - Rubber Mold Tooling Design Engineer [Joo Koon | up to $5000]

The Supreme HR Advisory Pte. Ltd. • Singapore

On-site
SGD 45,000 - 56,000
Tooling Design Engineer (Rubber Mold) - LCYL
Tooling Design Engineer (Rubber Mold) - LCYL

The Supreme HR Advisory Pte. Ltd. • Singapore

On-site
SGD 45,000 - 56,000
Tooling Designer / Engineering Engineer, Mold & Tool Design
Tooling Designer / Engineering Engineer, Mold & Tool Design

HI-P SINGAPORE PTE. LTD • Singapore

On-site
SGD 48,000 - 64,000
Rubber Mold Tooling Design Engineer | Semiconductor Industry | 5 Days -3972
Rubber Mold Tooling Design Engineer | Semiconductor Industry | 5 Days -3972

THE SUPREME HR ADVISORY PTE. LTD. • Singapore

On-site
SGD 45,000 - 56,000
ENGINEERING ENGINEER, MOLD & TOOL DESIGN
ENGINEERING ENGINEER, MOLD & TOOL DESIGN

HI-P SINGAPORE PTE. LTD. • Singapore

On-site
SGD 42,000 - 70,000
Mold Tooling Engineer — Precision Rubber for Semiconductors
Mold Tooling Engineer — Precision Rubber for Semiconductors

FOCAL ENERGY SOLUTIONS PTE. LTD. • Singapore

On-site
SGD 70,000 - 110,000
Mold/ Tool Design Engineer
Mold/ Tool Design Engineer

Positronic Asia Pte Ltd • Singapore

On-site
SGD 47,000 - 100,000
Mold Designer
Mold Designer

CICOR ASIA PTE. LTD. • Singapore

On-site
SGD 60,000 - 90,000