Sr Test Engineer, Dynometer
Lucid Motors
A complete application in a minute
Tailored resume and cover letter, ready to send.
Benefits offered by this job
Job summary
Lucid Motors is seeking a Sr Test Engineer, Dynamometer to lead dyno operations at AMP-2, building and validating test capabilities from first commissioning to SOP. You will own safety, data integrity, and performance mapping across the envelope while coordinating with multiple teams to ensure launch readiness.
You will develop test sequences (LabVIEW), oversee instrumentation and calibration, and drive efficiency, OEE, and MTTR improvements.
Qualifications
- Bachelor's degree in Electrical or Mechanical Engineering.
- 5–8 years of dyno test engineering experience in EV or automotive.
- Fluent in English; Arabic strongly preferred.
- Preferred: greenfield launch experience and ISO 17025.
Responsibilities
- Own dyno stations operations
- Maintain dyno stations readiness and safety compliance
- Own efficiency mapping across torque/speed operating envelope
- Execute steady-state and transient performance validation
- Own torque transducer standards, correction factors, and correlation
- Ensure speed and power measurement integrity
- Own instrumentation for temperature, current, voltage, and position
- Maintain calibration and traceability of test cell instruments
- Own DAQ standards, calibration, and sampling strategies
- Ensure data integrity for validation and analytics
- Support TPM deployment across Autonomous Maintenance, Planned Maintenance, and Focused Improvement pillars
- Contribute to equipment OEE improvement, MTBF/MTTR reduction, and predictive maintenance strategies
- Leverage MES, IIoT, and historian analytics to identify and eliminate losses
- Enforce HV LOTO, HVIL continuity, and mandatory HV PPE
- Comply with SASO, Saudi MOL, IEC 60204, and ISO 13849 / IEC 62061
- Support HV emergency response including thermal runaway isolation
- Achieve HV safety competency appropriate to scope of work
- Support AMP-2 Safe Launch activities, run-at-rate events, and capacity verification within scope
- Contribute to Launch Readiness Reviews, Layered Process Audits, and Process Confirmation routines
- Participate in QRQC / RCCA escalations during launch and ramp-up phases
- Commission and sustain dyno controls, inverter/battery simulators, cooling, oil conditioning
- Develop automated test sequences and LabVIEW or equivalent software; manage recipes
- Correlate torque, speed, power, temperature, voltage/current and efficiency results
- Own cell availability, preventive maintenance, instrumentation health, test throughput
- Support FAT/SAT, commissioning, equipment acceptance, Safe Launch, run-at-rate and capacity verification
- Control production, process, software and test changes through risk assessments and approvals
- Participate in readiness reviews and QRQC/RCCA; close actions with verified effectiveness
- Apply HV safety and PPE requirements; never bypass safety devices
- Protect product genealogy, calibrated-tool status, test integrity and document control
- Comply with AMP-2, SASO, IATF 16949, IEC 60204 and functional-safety requirements
- Build Saudi national capability through structured OJT and knowledge transfer
- Collaborate across Production, Quality, Maintenance, Automation/Robotics, IT/OT, MES and suppliers
Skills
Education
Tools
Job description
At Lucid, we are creating exceptional mobility experiences through innovation to drive the world forward. Built on Lucid’s proprietary technology and software-defined vehicle architecture, our award-winning vehicles bring our “Compromise Nothing™” approach to the global automotive market. That means refusing to choose between performance and sustainability, design and engineering, ambition and integrity. In Lucid Air and Lucid Gravity, we have designed and built vehicles that have redefined their segments, combining exceptional range, performance, design, and expansive space in a single experience.
We achieve this through deep vertical integration, with design, engineering, and productionhappening in‑houseacross our global offices andmanufacturingfacilities. Our teamscomefromindustriesaround the world, united by a shared commitment to excellence. By refusing to settle, youcanhelpredefinewhat’spossible andshape the future of mobility.
The Sr Test Engineer, Dynamometer owns dynamometer test operations at AMP-2 —dynameter, efficiency mapping, and performance/durability validation. Joining a greenfield facility, this engineer builds dyno infrastructure from first commissioning through volume ramp to SOP. The role is accountable for dyno test integrity, correlation, and productivity. The role operates through disciplined change control, objective launch evidence, cross-functional problem solving.
- Own dyno stations operations
- Maintain dyno stations readiness and safety compliance
- Own efficiency mapping across torque/speed operating envelope
- Execute steady-state and transient performance validation
- Own torque transducer standards, correction factors, and correlation
- Ensure speed and power measurement integrity
- Own instrumentation for temperature, current, voltage, and position
- Maintain calibration and traceability of test cell instruments
- Own DAQ standards, calibration, and sampling strategies
- Ensure data integrity for validation and analytics
- Support TPM deployment across Autonomous Maintenance, Planned Maintenance, and Focused Improvement pillars
- Contribute to equipment OEE improvement, MTBF/MTTR reduction, and predictive maintenance strategies
- Leverage MES, IIoT, and historian analytics to identify and eliminate losses
- Enforce HV LOTO, HVIL continuity, and mandatory HV PPE for all work on or near EV Powertrain equipment
- Comply with SASO, Saudi MOL, IEC 60204, and functional safety standards (ISO 13849 / IEC 62061)
- Support HV emergency response including thermal runaway isolation and battery-related incident procedures
- Achieve and maintain HV safety competency appropriate to scope of work
- Support AMP-2 Safe Launch activities, run-at-rate events, and capacity verification within scope
- Contribute to Launch Readiness Reviews, Layered Process Audits, and Process Confirmation routines
- Participate in QRQC / RCCA escalations during launch and ramp-up phases
- Commission and sustain dyno controls, inverter/battery simulators, cooling, oil conditioning, torque/speed measurement, DAQ, safety systems and facility interfaces.
- Develop automated test sequences and, where applicable, LabVIEW or equivalent softwares; manage recipes, configuration and software release.
- Correlate torque, speed, power, temperature, voltage/current and efficiency results across cells using reference units and uncertainty analysis.
- Own cell availability, preventive maintenance, instrumentation health, test throughput and safe response to HV, overspeed, thermal, fluid and rotating-equipment hazards.
- Support FAT/SAT, commissioning, equipment acceptance, Safe Launch, run-at-rate and capacity verification with objective evidence and disciplined punch-list closure.
- Control production, process, software and test changes through documented risk assessment, approvals, validation, revision history and rollback or containment planning.
- Participate in readiness reviews, Layered Process Audits, Process Confirmation and QRQC/RCCA; close assigned actions with verified effectiveness.
- Apply role-specific HV LOTO/HVIL, machine safety, stored-energy isolation, electrical safe-work and PPE requirements; never bypass safety devices or product protections.
- Protect product genealogy, calibrated-tool status, test/measurement integrity, document control and audit-ready objective evidence.
- Comply with applicable AMP-2, SASO, Saudi labor/EHS, IATF 16949, IEC 60204 and functional-safety requirements within assigned scope.
- Build Saudi national capability through structured OJT, ILU/skills matrices, practical assessment, certification, cross-training and documented knowledge transfer.
- Create technical standards, troubleshooting guides and training material; support interviews and KSA university/TVTC engagement where requested.
- Collaborate across Production, Quality, Maintenance, Automation/Robotics, Manufacturing Engineering, EHS, IT/OT, MES, Supply Chain, Product Engineering and suppliers.
- Deep dynamometer test expertise
- Efficiency mapping and performance validation fluency
- Torque/speed/power measurement expertise
- Data-analytics capability
- Effective cross-functional communicator
- Technical standards, structured problem solving, risk-based decision making and controlled documentation
- Data literacy: KPI definition, trend analysis, evidence-based validation and clear executive/shop-floor communication
- Cross-functional influence, supplier coordination and disciplined ownership in a greenfield launch environment
- Coaching, competency assessment and knowledge transfer in a multicultural English/Arabic workplace
- Bachelor's degree in Electrical or Mechanical Engineering
- 5 to 8 years in dyno test engineering (EV or automotive)
- Fluent in English; Arabic strongly preferred
- Preferred: greenfield launch; ISO 17025
- Demonstrated experience with commissioning, FAT/SAT, launch, production readiness or high-volume manufacturing ramp within the role discipline
- Working knowledge of IATF 16949, APQP/change control, machine/HV safety and traceability requirements applicable to the role
- Ability to support site, shift, weekend, shutdown or emergency activities when operationally requiredPreferred: recognized discipline certification, Lean/Six Sigma, greenfield EV/automotive launch and KSA workforce-development experience
Lucid offers a comprehensive and competitive benefits package including medical, dental, and vision insurance; life and disability coverage; paid time off; paid holidays, paid sick leave; and a401(k) retirementplan. Hourly/non-exempt employees accrue up to 120 hours paid time off, and salaried/exempt employee accrue up to 160 hours paid time off. Eligible employees may also participate in Lucid’s equity program and/or a discretionary annual cash incentive program. Incentive and equity awards, if applicable, are determined based on individual performance, role scope, market considerations, and overall company results, in accordance with the terms of the applicable plans.
At Lucid, we believe diversity strengthens everything we build. Lucid Motors is proud to be an equal opportunity employer and is committed to providing an inclusive workplace for all. We consider all qualified applicants without regard to race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity or expression, marital status, or any other characteristic protected by applicable state or federal laws and regulations.
Lucid Motors is committed to providing reasonable accommodations for qualified individuals with disabilities. If you need any accommodation to participate in the application process, please contact us at TA-Operations <@> lucidmotors.com. This email address is designated solely for accommodation requests and is not monitored for job applications or resume submissions.
By submitting your application, you understand and agree that your personal data will be processed in accordance with our Candidate Privacy Notice.
'/%3e%3cpath%20d='M101.744%2012.4726L102.894%2016.1947L99.0021%2013.2201L101.744%2012.4726ZM105.3%208.40937H100.488L99.0026%203.59473L97.5116%208.41047L92.7%208.40385L96.5965%2011.3834L95.1055%2016.1942L99.0021%2013.2196L101.408%2011.3834L105.3%208.40992V8.40937Z'%20fill='white'/%3e%3cdefs%3e%3clinearGradient%20id='paint0_linear_5593_1381'%20x1='90'%20y1='9.44471'%20x2='99'%20y2='9.44471'%20gradientUnits='userSpaceOnUse'%3e%3cstop%20stop-color='%2300AD70'/%3e%3cstop%20offset='0.998594'%20stop-color='%2300B67A'/%3e%3cstop%20offset='1'%20stop-color='%23DCDCE6'/%3e%3c/linearGradient%3e%3c/defs%3e%3c/svg%3e){kind=small}
