Field Engineer (CCTV, Cabling & Traffic Counter Installation)

Field Engineer (CCTV, Cabling & Traffic Counter Installation)

We require a skilled Field Engineer to perform CCTV installation, structured cabling, and traffic counter deployment at client sites. The engineer must be capable of handling end-to-end installation, configuration, and verification of systems.

Scope of Work:

• Install and configure CCTV cameras at designated points.
• Run structured CAT5e/6 cabling across customer premises.
• Terminate, test, and label cables for connectivity assurance.
• Install and configure traffic counters as per site requirements.
• Ensure proper drilling, mounting, and alignment of devices.
• Verify device connectivity and integration with network systems.
• Document the work performed and provide before/after photos.
• Report status to the service desk and obtain site contact sign-off.

Tools & Equipment Required:

• Fully charged laptop with RetailNext Network Utility installed.
• 15.4W Standard PoE Injector (48V/0.3A DC).
• CAT5e cable (50 ft), 5 x RJ45 heads, 1 x RJ45 Gender Changer.
• Cable tester, cable toner / tracer / tone tester.
• Cat5e/6 crimping tools.
• Screwdriver set (Phillips & flat), Allen keys / torque bits.
• Drywall screws and anchors.
• Drill with assorted drill bits (½", ⅛", 1").
• Spirit level / leveler tool.
• 10–12 ft A-type ladder.
• Mobile phone with internet, hotspot capability, and camera.

Requirements for Engineer:

• Experience in CCTV installation, structured cabling, and network device setup.
• Familiarity with traffic counter devices and integration.
• Ability to use cable testing and crimping tools.
• Proficient in laptop-based testing and configuration.
• Must have good communication skills and ability to coordinate with client contacts.
• English language proficiency (additional local language skills preferred).
• Physically fit to handle ladder work and equipment installation.

Responsibilities:

• Arrive on site on time and announce as NSC Engineer (do not disclose employer company name).
• Verify scope of work with the onsite contact before starting.
• Carry out installation, cabling, and device setup per technical requirements.
• Test all installed devices and confirm functionality with the service desk.
• Label all cables and devices as required.
• Complete a Site Visit Report (SVR) and have it signed by the client onsite contact.
• Submit documentation, photos, and SVR to service desk within 48 hours of completion.