A/C Mechanic

Quetta Electric Supply Company

Quetta City Tehsil

Presencial

PKR 268.000 - 368.000

Jornada completa

Hace 2 días
Sé de los primeros/as/es en solicitar esta vacante

Consigue una respuesta de este empleador

Tu currículum y tu carta de presentación, adaptados exactamente a lo que buscan contratar.

Supera los filtros ATS

Descripción de la vacante

Quetta Electric Supply Company is seeking an experienced A/C Mechanic (BPS-05) to install, service, and overhaul HVAC systems across headquarters, regional centers, and offices in Balochistan. The role requires handling refrigerants, brazing copper piping, measuring pressures, and performing preventive maintenance to ensure reliable cooling operations.

The ideal candidate will possess matriculation with HVAC experience, strong electrical troubleshooting skills, and familiarity with VRF and

Formación

  • HVAC trade knowledge required for this role.
  • Matriculation with HVAC and refrigeration exposure is essential.
  • Familiarity with safety and environmental standards is mandatory.

Responsabilidades

  • Install, service, and overhaul residential and commercial HVAC units.
  • Troubleshoot electrical control circuits, capacitors, relays, and motors.
  • Measure pressures using refrigeration gauges and detect leaks with detectors.
  • Evacuate systems to deep vacuum and perform precise refrigerant charging.
  • Clean and service evaporator/condenser coils and maintain service logs.

Conocimientos

HVAC fundamentals
Oxy-acetylene brazing
Leak detection
Electrical troubleshooting
VRF technology familiarity
Safety and gas handling

Educación

Matriculation with HVAC experience

Herramientas

Manifold gauges
Vacuum pumps
Digital charging scales
Electronic leak detectors
Oxy-acetylene torch

Descripción del empleo

A/c Mechanic

Active Prep BPS-05 NJP-QESCO-10349 QESCO/RECT/2026/01

Official recruitment notification, eligibility criteria, pay scale (BPS-05), quota allocation, and written screening test syllabus for A/c Mechanic in the Quetta Electric Supply Company.

Online applications for this recruitment closed on November 14, 2026. Official screening test syllabus weightages, paper scheme, and practice materials are actively maintained for registered candidates preparing for the upcoming written examination.

What are the salary, age limit, total vacancies, and last date for A/C Mechanic (BPS-05) in Quetta Electric Supply Company (2026)?

A/C Mechanic (BPS-05) offers 1 Post in Quetta Electric Supply Company (Quetta) with an estimated salary package of PKR 24,000 - 33,000 / month (Basic Pay Scale BPS-05) and an age limit of 18 - 35 years (General age relaxation admissible as per Federal Government Rules).

Case Number NJP-QESCO-10349

Department / Ministry Quetta Electric Supply Company

Total Positions 1 Post

Job Type / Status Contract

Place of Posting Balochistan

Age Limit 18 - 35 years (General age relaxation admissible as per Federal Government Rules)

Estimated Base Salary Package PKR 24,000 - 33,000 / month (Basic Pay Scale BPS-05)

Credential Category Matriculation With Technical Experience In Hvac And Refrigeration

Posting Date October 30, 2026

Apply Before November 14, 2026 (Closed)

What is the role and official job description of A/C Mechanic (BPS-05) at Quetta Electric Supply Company?

The A/C Mechanic (BPS-05) at QESCO serves as a skilled HVAC technician responsible for the installation, preventive maintenance, repair, and overhaul of heating, ventilation, air conditioning, and refrigeration systems across QESCO headquarters buildings, regional computer billing centers, grid control rooms, and officer residences. The role involves troubleshooting split air conditioners, package units, inverter heat pumps, precision computer room air conditioners (CRAC), and cold water chillers. Key duties include checking refrigeration system pressures using manifold gauges, detecting refrigerant leaks with electronic halogen detectors or soap bubbles, evacuating systems using dual-stage vacuum pumps, charging refrigerants (R410A, R32, R134a, R22), oxy-acetylene torch brazing of copper tubing, testing electrical compressor motors, servicing PCB control boards, cleaning condenser coils, and maintaining routine service logs.

What are the key duties and daily responsibilities of A/C Mechanic (BPS-05) in Quetta Electric Supply Company?
  • Perform installation, servicing, and overhauling of residential split, inverter, floor-standing, and commercial HVAC units.
  • Troubleshoot electrical control circuits, testing capacitors, contactors, overload relays, thermostats, and inverter PCB modules.
  • Measure operating suction and discharge pressures using digital and analog refrigeration manifold gauges.
  • Detect refrigerant leaks in copper coils and flare fittings using electronic sniffer probes and nitrogen pressure holding tests.
  • Execute oxy-acetylene brazing of copper suction and discharge pipes using silver phosphorus brazing alloy and inert nitrogen purging.
  • Evacuate refrigeration systems to below 500 microns using dual-stage rotary vacuum pumps prior to refrigerant charging.
  • Charge refrigerants by precise weight using digital charging scales according to manufacturer specifications.
  • Clean evaporator coils, condenser fins, blower wheels, and air filters using high-pressure coil cleaning machines.
Which technical skills and domain competencies are required for A/C Mechanic (BPS-05)?
  • Thorough mastery of the vapor compression refrigeration cycle and thermodynamic principles of heat transfer.
  • Practical expertise in oxy-acetylene torch brazing, copper pipe flaring, swaging, and tube bending.
  • Proficiency in operating HVAC diagnostic tools: manifold gauges, vacuum pumps, micron gauges, and electronic leak detectors.
  • Strong electrical troubleshooting competence in single-phase and three-phase motor circuits, starting capacitors, and relays.
  • Familiarity with modern inverter variable refrigerant flow (VRF) technology and DC inverter compressor operation.
  • Sound commitment to environmental and refrigeration safety standards, proper gas recovery, and pressurized nitrogen handling.
What is Quetta Electric Supply Company and what is its organizational role in public sector recruitment?

Quetta Electric Supply Company (QESCO) is a premier public sector electricity distribution utility functioning under the administrative control of the Ministry of Energy (Power Division), Government of Pakistan. Incorporated under the Companies Ordinance 1984, QESCO manages the power distribution infrastructure across 32 districts of Balochistan. Alongside primary electrical transmission lines and grid substations, QESCO maintains extensive technical facilities including computerized billing data centers, automated Supervisory Control and Data Acquisition (SCADA) master control rooms, telecommunication server rooms, regional testing laboratories, and corporate executive directorates. Maintaining precise ambient temperature and humidity control in these critical electronic environments is vital to prevent server overheating, electronic relay tripping, and data corruption.

How to prepare for the A/C Mechanic (BPS-05) practical trade test and oral viva voce?

Practical Trade Test, Brazing Demonstration, and Technical Viva Blueprint

The recruitment examination for the post of A/C Mechanic (BPS-05) in Quetta Electric Supply Company (QESCO) is designed to evaluate practical craftsmanship in refrigeration systems, copper piping fabrication, leak detection, vacuum dehydration, electrical controls troubleshooting, and technical viva voce competence. Candidates are evaluated through an exhaustive hands‑on trade demonstration and an oral interview.

Section 1: Practical Trade Demonstration and Refrigeration Craftsmanship

The practical evaluation is conducted in a fully equipped HVAC workshop under the direct observation of the technical evaluation committee:

  • Copper Tube Fabrication and Brazing Test: Candidates are provided with standard refrigeration copper tubing (1/4-inch, 3/8-inch, and 1/2-inch). The candidate must cut the tube cleanly using a roller pipe cutter, ream the inner edge to remove burrs, fabricate a standard 45-degree flare connection, and perform a swaged slip joint. The candidate must then ignite an oxy-acetylene or oxy‑LPG torch, adjust the flame to a neutral setting, apply flux (if using brass rods) or use phosphorus copper rods, and execute a leak‑tight brazed joint under nitrogen purging without burning the copper. The joint is pressure‑tested at 300 PSI with dry nitrogen in a water dip tank to verify zero bubbles.
  • System Evacuation and Vacuum Dehydration: Candidates must connect a refrigeration manifold gauge set and a two‑stage rotary vane vacuum pump to a simulated air conditioning circuit. The candidate must demonstrate how to pull a deep vacuum below 500 microns, observe the vacuum decay test on a digital micron gauge to verify the absence of moisture and leaks, and isolate the manifold before shutting down the vacuum pump to prevent oil suck‑back.
  • Refrigerant Charging Demonstration: Candidates must demonstrate the procedure for charging a modern split air conditioner with refrigerant (such as R410A or R32). The candidate must place the refrigerant cylinder upside down on a digital charging scale (for zeotropic blends like R410A to charge in liquid state), purge air from the charging hose, zero the scale, and feed the exact manufacturer‑specified weight (in grams) into the liquid line or suction line using controlled throttling pulses while the compressor is operating.
  • Airflow and Chemical Coil Cleaning: Candidates must demonstrate safe disassembly of indoor evaporator covers, electrical motor shielding, and cleaning of condenser coils using a calibrated high‑pressure water washer and alkaline fin cleaner, ensuring no bending of delicate aluminum fins.
Section 2: Electrical Controls and Motor Diagnostics

Refrigeration systems in critical data and control rooms require faultless electrical diagnostics:

  • Compressor Motor Testing: Candidates must use a digital multimeter to measure resistance across the Common (C), Run (R), and Start (S) terminals of a single-phase reciprocating or rotary hermetic compressor, verifying the mathematical rule that Resistance(R‑S) equals Resistance(C‑R) plus Resistance(C‑S). The candidate must perform an insulation resistance Megger test between each terminal and the compressor metal casing to detect motor winding burnout.
  • Capacitor and Contactor Testing: Candidates must test dual‑run motor capacitors using a digital capacitance meter, verifying microfarad (uFD) ratings within plus or minus 5 percent tolerance. The candidate must inspect electromagnetic contactor points for pitting and test the 220V holding coil for continuity.
Section 3: Key Technical Oral Interview Questions and Detailed Answers

Question 1: Explain the four fundamental stages of the vapor compression refrigeration cycle and describe the state of the refrigerant at each stage.

Answer: The cycle consists of four continuous processes: First, Compression: Low-pressure, low-temperature superheated vapor is drawn into the compressor and compressed into high-pressure, high-temperature superheated vapor; Second, Condensation: High-pressure vapor enters the condenser, where ambient air removes latent heat, condensing vapor into high-pressure subcooled liquid; Third, Expansion: High-pressure liquid passes through a capillary tube or expansion valve, undergoing a sudden pressure drop into a cold low-pressure liquid-vapor mixture; Fourth, Evaporation: This mixture enters the evaporator, absorbs heat from indoor air, boils into low-pressure vapor, and returns to the compressor.

Question 2: Why must R410A refrigerant always be charged in the liquid state, and what is temperature glide?

Answer: R410A is a near-azeotropic blend composed of 50 percent R32 and 50 percent R125. Because its components have slightly different boiling points, charging in the vapor state causes fractionation—the refrigerant with the lower boiling point evaporates faster, altering the blend composition and degrading performance. Charging in the liquid phase (by inverting the cylinder) ensures the exact 50/50 proportion enters the system. Temperature glide refers to the temperature difference between the bubble point and dew point at constant pressure; R410A has a negligible glide (less than 0.2 C), behaving almost like a single-fluid azeotrope.

Question 3: Why is moisture considered the most dangerous contaminant in a refrigeration system, and how does it damage the compressor?

Answer: Moisture inside a refrigeration system causes two catastrophic failures: First, Ice Blockage: Moisture cannot dissolve in cold refrigerants; when it reaches the expansion valve or capillary tube where temperatures drop below zero degrees Celsius, water freezes into solid ice crystals, completely choking refrigerant flow and causing the evaporator to starve; Second, Chemical Corrosion and Acid Formation: Under high discharge temperatures and pressures in the compressor, moisture reacts with synthetic polyolester (POE) or mineral refrigeration lubricants and halogenated refrigerants to produce hydrochloric and hydrofluoric acids. These acids dissolve motor winding insulation (causing hermetic compressor burnout), etch valve plates, and cause copper plating on bearings, leading to seizure.

Question 4: What is the purpose of pulling a vacuum down to 500 microns, and why can an ordinary compressor not be used as a vacuum pump?

Answer: Pulling a deep vacuum down to 500 microns (0.5 mm of mercury) is necessary to lower the boiling point of water below ambient temperature, causing any liquid moisture trapped in copper pipes and compressor oil to boil into vapor and be exhausted from the system, while removing non-condensable atmospheric air (oxygen and nitrogen). An ordinary refrigeration compressor cannot be used as a vacuum pump because it has large internal clearance volumes, cannot achieve deep vacuum levels below 25,000 microns, lacks the compression ratio to boil water, and will overheat rapidly when run without refrigerant mass flow and cooling.

Question 5: What is the function of a crankcase heater on a commercial air conditioning compressor?

Answer: A crankcase heater is an electric heating element wrapped around or inserted into the bottom of the compressor crankcase. When the air conditioner is turned off during cold periods, refrigerant vapor in the system naturally migrates toward the coldest point—the compressor—and dissolves into the lubricating oil. During subsequent startup, the sudden pressure drop in the crankcase causes this dissolved liquid refrigerant to boil violently, causing the oil to foam. This oil foam is pumped out through the discharge valves, starving bearings of lubrication and leading to mechanical seizure. The crankcase heater keeps the oil warmer than the rest of the system, driving away refrigerant vapor and preventing liquid slugging.

Section 4: Four-Week Practical Trade Drill and Preparation Plan

Week 1: Brazing, Tubing Fabrication, and Piping Assembly

Practice copper pipe cutting, reaming, flaring, and swaging on various pipe diameters. Spend 15 hours practicing oxy-acetylene torch brazing using 5 percent and 15 percent silver-bearing rods. Test every brazed joint under 300 PSI nitrogen pressure to ensure zero porosity and complete penetration.

Week 2: Vacuum Dehydration, Manifold Gauges, and Leak Detection

Practice connecting manifold gauges, vacuum pumps, and electronic micron gauges. Master the procedure for pressurizing split AC systems with dry nitrogen to 350 PSI for 24-hour pressure holding tests. Practice soap bubble leak testing on flare nuts and service valves.

Week 3: Refrigerant Recovery, Charging, and Inverter Troubleshooting

Practice charging refrigerants (R410A, R32, R134a) by precise weight using digital scales. Study inverter DC motor compressors, electronic expansion valves (EEVs), and diagnostic error codes for major brands (Gree, Haier, Dawlance, Mitsubishi). Practice testing sensors, thermistors, and inverter power modules with multimeters.

Week 4: Electrical Controls, Mock Trade Test, and Board Viva

Review compressor electrical terminal testing (C-S-R formulas), capacitor testing, and contactor wiring. Practice answering thermodynamic, environmental, and electrical safety interview questions. Conduct a full timed simulation of copper brazing, vacuum pulling, and electrical testing.

Section 5: Examination Day Candidate Instructions
  • Required Documents: Original CNIC, matriculation certificate, 4 years experience certificate in HVAC trade, Balochistan domicile certificate, and official NJP test admission slip.
  • Workshop Attire: Wear fire‑responsive cotton work clothes, industrial safety boots, and carry personal clear safety goggles and leather brazing gloves.
  • Trade Test Demeanor: Demonstrate calm, systematic execution; always wear eye protection when lighting the torch or handling pressurized refrigerant cylinders; and explain your steps clearly to testing evaluators.
Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

P.P.C Operator
P.P.C Operator

Quetta Electric Supply Company (QESCO) • Quetta City Tehsil

Presencial
PKR 325.000 - 389.000
Pension benefits
Medical facilities
Job security
Ac Operator
Ac Operator

Pakistan Navy • Quetta City Tehsil, Karachi Division

Presencial
PKR 279.000 - 502.000
Ac Technician
Ac Technician

Ranjha Trade Test & Training Center • Islamabad

Presencial
PKR 420.000 - 660.000
AC/ Refrigeration Mechanic
AC/ Refrigeration Mechanic

Sui Southern Gas Company Limited • Karachi Division

Presencial
PKR 391.000 - 614.000
HVAC A/C Mechanic - Contract BPS-05
HVAC A/C Mechanic - Contract BPS-05

Quetta Electric Supply Company • Quetta City Tehsil

Presencial
PKR 268.000 - 368.000
Accounts Assistant
Accounts Assistant

Quetta Electric Supply Company • Quetta City Tehsil

Presencial
PKR 502.000 - 692.000
Bill Distributor
Bill Distributor

Quetta Electric Supply Company • Quetta City Tehsil

Presencial
PKR 312.000 - 424.000
Naib Qasid
Naib Qasid

Quetta Electric Supply Company • Quetta City Tehsil

Presencial
PKR 201.000 - 279.000
Fireman
Fireman

Office of the Chief Officer, Municipal Corporation Khuzdar • Quetta City Tehsil

Presencial
PKR 312.000 - 424.000
Medical allowance
House rent allowance
Local compensatory allowances
+2
Electrician (BPS-04)
Electrician (BPS-04)

Computer Operator & • Islamabad

Presencial
PKR 357.000 - 513.000
Ubicaciones