Operator-Well Services

Energy Development Corporation; Legazpi; On-site; PHP 600,000 - 900,000; Full time

Job summary

Energy Development Corporation is seeking a skilled Well Services specialist to execute testing/logging and maintain critical well-service equipment across sites in the Philippines. You will calibrate tools, follow safety and quality standards, and coordinate with engineers for efficient operations.

The role emphasizes site readiness, data collection, and collaboration with teams to ensure compliance and continuous improvement in well services activities.

Qualifications

• Demonstrates knowledge of safety procedures and personal protective equipment.
• Maintains and applies quality standards for Integrated Well Services.
• Proficient in planning and documenting well service activities.

Responsibilities

• Performs testing/logging of assigned wells per quality standards and schedules.
• Operates, calibrates and maintains IWS equipment and tools.
• Leads site inspections, JMP planning, and mobilization of major well services equipment.
• Maintains accurate records and ensures compliance with safety and regulatory requirements.

Skills

Safety procedures

Quality standards

Tools calibration

Well services operations

Tools

CIC (Casing Inspection Caliper)

DHV (Down Hole Video)

PTS (Pressure/Temperature/Spinner)

Job description

Unleash your energy within! Be a part of the EDC Team!

SCOPE AND RESPONSIBILITIES PROCESS IMPROVEMENT AND STANDARDIZATION:

Provides input to further improve the following: well services operations, tool calibration and maintenance, operational safety procedures, warehousing organization, and document management relating to well services operations. Participates in the development of quality standards relevant to Integrated Well Services (IWS), including but not limited to operating procedures, equipment performance and design, project/program approval criteria, etc.

COMPETENCY DEVELOPMENT:

Ensures personal competence and authorization are continuously maintained and promotes continuous learning among personnel, ensuring they are competent and knowledgeable about safety procedures.

TASK IMPLEMENTATION (Well Services Activities):

Performs the required testing/logging of assigned wells in accordance to the team's quality standards, approved work schedule, and applicable regulatory requirements. These include but are not limited to activities such as Casing Inspection Caliper (CIC) run, Down Hole Video (DHV) run, XY Caliper run, Pressure, Temperature, and Spinner (PTS) run, Well Stimulation by Air Compression, Well quenching, Well Head Replacement (WHR), discharge testing, etc.

Operates, drives, calibrate, and maintains all IWS equipment such as but not limited to survey truck, quenching unit, air compressor package, calibrating bath, downhole tools, welding machine, generators, survey gears, discharge gears, data loggers and transmitters, pressure gauges, etc.

Responsible for ensuring that all tools and equipment are fit for purpose prior to any operation. Maintains, prepares and calibrates tools and equipment as per quality standards. Facilitates third party testing and calibration of tools and equipment whenever necessary. Leads and coordinates all site inspections, preparations and set-up to ensure readiness in operations. Organizes all operational requirements, checklists, and travel routes (Journey Management Program - JMP) during mobilization of logging trucks, and other major well services equipment across all EDC sites.

Provides input in the planning, organizing and monitoring of assigned Well Services activities. Evaluates tools and equipment issues and recommends mitigations and solutions to avoid such issues from occurring. Assists the Well Services Engineer in the preparation of all required tools and equipment for the implementation of all well services activities. Regularly updates immediate superior on status of activities in his assigned area of responsibility. Reviews well test/wireline data results, and analyzes for anomalies, prior submission to Well Services Engineer. Provides manpower support and technical assistance to other groups, including but not limited to Resource Management, Drilling, FT& S, etc. Evaluates 3rd party service providers, as needed, in accordance to corporate policies on engagement of external services.

DOCUMENTATION / DATA MANAGEMENT:

Collects and records data as instructed by Well Services Engineer, Lead or Site Head. Provides data and other required information relevant to the group's various reports. Maintaining accurate records of all Safety Documents in accordance with the Company's Document and Record Management Procedure.

RESOURCE, LOGISTICS AND FACILITIES:

Prepares necessary documentation in mobilization and transferring of wireline and well testing equipment such as Journey Management Plan (JMP) and Setting to Work (STW). Manages and organizes inventory of well testing, wireline and well intervention equipment, tools, spare parts, and related supplies, based on the assignment given by the immediate superior. Ensures availability of spare parts, materials, and supplies for the well services operations. Plans and manages the utilization of resources related to assigned activities. Prepares requests through Central Maintenance Management System (CMMS) and Kiss Flow (KF) for well services operation requirements and keeps record of such activities. Receives, checks deliveries of tools, spare parts, materials, and supplies. Label such items as applicable. Evaluates and recommends technical specifications of purchased tools and equipment.

EMPLOYEES TRAINING AND DEVELOPMENT:

Participates in the learning program/other intervention initiatives as identified in the individual development plan based from feedback and competency-gaps to continually upgrade/increase competency proficiency level as required by the job. Makes accomplishment reports through the established performance management system and attends discussion with the immediate head for the assessment of individual goals, identification of areas for improvement and career growth.

REGULATORY COMPLIANCE:

Ensures all activities comply with relevant laws, regulations, and industry standards.

SAFETY MANAGEMENT:

Ensure Safety of IWS and other section/department personnel, equipment and other stakeholders including contractors and community, and protect the environment in compliance to company safety, health and environmental policy. Ensures all safety protocols are strictly followed to protect personnel from general danger or hazard. Issues stop work order for any hazardous work action and /or condition identified in the assigned work area, scope of work is changed, permit expires, or when a near-miss, or accident occurs. Secures PTW/STW including all associated clearance as needed. Prepares all necessary documents including JMP, JHA, job risk assessment, etc. Acts as the Nominated Supervisor (NS) under the EBSI Permitting system: Protects the interest of the company by assuring that a safe workplace is provided to all workers. Identifies and controls all hazards and risks. Be well-versed, complies and enforces the EDC Safety Rules as well as the General Safety Guidelines of EDC.

Planning and Collaboration:

Establishes general safety. Collaborates with stakeholders to ensure all safety requirements are met prior to commencement of work.

Setting to work:

Ensures Competent Persons (CP) are Authorized for the job / work. Verifies that the hazard controls are in place prior to work authorization. Ensures CP’s understanding of the established General Safety and verifies that the same is cascaded to the working party.

Execution and Safety Compliance:

Oversees the work activities of the Competent Persons, ensuring all activities are conducted safely. Ensures that established safe methods of work remain effective and new hazards are managed.

Competency - Ensures continuous learning and professional development and maintains personal competence and authorization.

Who We Are

Energy Development Corporation is a geothermal energy industry pioneer and the recognized world leader in wet steam field technology. In the Philippines, EDC is the largest vertically integrated geothermal company, delivering 1,475MW of clean and renewable energy. We continue to diversify our renewable energy portfolio through investments in hydropower, solar power and wind energy projects in the Philippines. With almost 40 years of geothermal mastery, EDC is set to deliver the benefits of sustainable geothermal development to communities around the world as it ventures into Latin America and Indonesia. EDC is part of the First Gen Corporation (“First Gen”) Group, which has the largest portfolio of power plants using clean and renewable technology in the Philippines. First Gen’s 16 power generation plants have a combined capacity of 2,763MW. First Gen has one of the cleanest power portfolios in the country with its entire power generation portfolio utilizing fuels such as geothermal steam, water, and natural gas. Wind power complements EDC’s existing power generation assets including the baseload geothermal plants, as well as, the Pantabangan hydroelectric plant, which serves as a peaking plant. EDC has become the leading geothermal energy producer in the Philippines through the successful development and operation of numerous geothermal energy projects. Since 1983, the Company has successfully developed, financed, built, and operated seven geothermal steamfields in five geothermal contract areas, containing both wet and dry steam. These steamfields currently supply geothermal steam to geothermal power plants with an aggregate installed capacity of 1,130 MW. In addition, the Company currently, directly and indirectly, owns and operates eleven geothermal power plants with a total installed capacity of 1,181 MW. EDC, through its indirect wholly owned subsidiary Green Core Geothermal, Inc., operates the 192.5MW Palinpinon and 112.5MW Tongonan geothermal power plants. Bacman Geothermal, Inc., another indirect wholly owned subsidiary of EDC, operates the 130MW Bacman geothermal power plant. The Company believes this track record has enabled it to develop the expertise needed to assess the feasibility of future acquisitions and greenfield projects, ensure the safe and efficient construction of power plants, and provide for efficient power plant operations.

Our Core Values

We have the best-qualified and trained professionals, technical people and support staff who persist in always bringing EDC to industry leadership. The company’s geothermal team has over 40 years of technical and management experience in the geothermal industry. We also have a core team geoscientists and engineers who are holders of degrees from Geothermal Institutes in Iceland, Italy, New Zealand and Japan. We are guided by the following distinct Lopez Group values: A Pioneering Entrepreneurial Spirit Business Excellence Unity Nationalism Social Justice Integrity Employee Welfare and Wellness We know from generations of experience that it is by living according to these values that a company can be built to last.